Mitel SX-200 DIGITAL Pabx Information Manual

							Installation Forms 
TABLE 3-21 
FORM 20 - ARS: COR GROUP DEFINITION 
SHEET 
-OF - 
-4 
-5 
-6 
-7 
-a 
-9 
-0 
Notes: 1. The system supports a maximum of 50 COR Groups numbered 1 - 50. 
2. Each COR Group accommodates a maximum of 25 members numbered 1 - 25. 
3. COR Group members are separated by a space. Consecutive numbered COR Group 
members are separated by a dash. For example, 3-7 instead of 3 4 5 6 7. 
4. The COMMENTS field is reserved for additional information. It is not used by the 
system and can be a maximum of 20 characters. 
Page 3-39  
						

							Installation Forms 
TABLE 3-22 
FORM 21 - ARS: DAY ZONE DEFINITION 
SHEET 1 OF 1 
DAY ZONE MON. 
TUE. WED. THU. 
FRI. SAT. SUN. 
01 
02 
03 
Notes: 1. Specify a Day Zone for each day of the week with an asterisk (*). 
2. Only one Day Zone can be assigned to each day. 
3. A Day Zone must be assigned to each day of the week before this form can be saved. 
Page 3-38  
						

							Installation Forms 
TABLE 3-23 
FORM 22 - ARS: MODIFIED DIGIT TABLE 
SHEET 1 OF 2 
Page 3-39  
						

							TABLE 3-23 (CONT’D) 
FORM 22 - ARS: MODIFIED DIGIT TABLE 
SHEET 2 OF 2 
Notes: 1. Specify the number of digits (a maximum of 25) that will be deleted for each Entry 
Number (1 - 50). 
2. Specify the number of digits (a maximum of 27 for Generic 1001 and 20 for Generic 
1000) that will be inserted for each Entry Number. Special number sequences that can 
be included in the DIGITS TO BE INSERTED field are: 
*x1 = Pause 5 Seconds 
*2 = Wait for Dial Tone 
“3 = Switch to DTMF for Subsequent Digits 
“4 = Do Not Display Further Modified Digits on Sets or SMDR 
*x5 = Pause for 10 Seconds 
** = * 
3. The COMMENTS field is reserved for additional information and is not used by the 
system. It can have a maximum of 20 characters. 
Page 3-40  
						

							Installation Forms 
TABLE 3-24 
FORM 23 - ARS: ROUTE DEFINITION 
SHEET 
-OF - 
Notes: 1. There are a maximum of 200 Route numbers. 
2. Assign a Trunk Group number, COR Group number and a Mod Digit Entry number for 
each Route number. 
3. The COR GROUP number links this form to Form 20, COR Group Definition. Assigning a 
COR Group number restricts those COR Group members from that route. Therefore, if 
no COR Group number is assigned, then all users can use this route. 
4. The COMMENTS field is reserved for additional information and is not used by the 
system. It can have a maximum of 20 characters. 
Page 3-41  
						

							Installation Forms 
TABLE 3-25 
FORM 24 - ARS: ROUTE LISTS 
SHEET 
-OF - 
SECOND (WT THIRD WT 1 FOURTH IWTl FIFTH 1 WT 1 SIXTH IWT  LIST NUM FIRST 
Notes: 1. Specify the Route List numbers (01 - 100). 
2. Assign the required Route numbers for each Route List number. Route selection occurs 
in the order that the Route numbers are entered. 
3. indicate the expensive routes with an “E” in the WT (Warning Tone) field. An enabled 
warning tone is represented by ON on the display. 
Page 3-42  
						

							Installation Forms 
TABLE 3-26 
FORM 25 - ARS: ROUTE PLANS 
ROUTE PLAN I: - ROUTE PLAN FUNCTION: 
SHEET -OF - 
TIME 
ZONE DAY ZONE 1 DAY ZONE 2 
START HOUR ROUTE LIST START HOUR ROUTE LIST 
I (1 - 100) 
(1 - 100) DAY ZONE 3 
START HOUR ROUTE LIST 
(1 - 100) 
ROUTE PLAN: - ROUTE PLAN FUNCTION: 
1 TIME 1 DAY ZONE 1 
I DAY ZONE 2 
I DAY ZONE 3 
I 
ZONE START HOUR ROUTE LIST START HOUR ROUTE LIST START HOUR ROUTE LIST 
(1 - 100) 
(1 - 100) 
(1 - 100) 
01 
02 
03 
04 
05 
06 
ROUTE PLAN: - ROUTE PLAN FUNCTION: 
TIME 
ZONE 
01 
02 
03 
04 
05 
06 DAY ZONE 1 DAY ZONE 2 
START HOUR ROUTE LIST START HOUR ROUTE LIST 
I (1 - 100) 
I (1 - 100) DAY 2 
START HOUR DNE 3 
ROUTE LIST 
(1 - 100) 
Notes: 1. There are a maximum of 50 Route Plan numbers. 
2. Specify the starting hour and Route List number for each time zone. 
Page 3-43  
						

							installation Forms 
TABLE 3-27 
FORM 26 - ARS: DIGIT STRINGS 
SHEET 
-OF - 
LEADING DIGITS RETURN DIAL TONE RESTRICTED COR GROUP 
* Generic 1000 ** Generic 1001 
Notes: 1. List the digits that will be dialed for external trunk access in the LEADING DIGITS field. 
The system supports a maximum of 100 Leading Digit entries. Each entry can be a 
maximum of five digits. 
** Users with COS Option 244 enabled (Room Status) and a Room Status condition of 
INTERNAL are denied calls to these numbers. 
2. Specify which entries require dial tone with a “YES” in the RETURN DIAL TONE field. 
The default value for this field is “NO” for no return dial tone. 
3. Specify the COR Group that is denied access to each leading digit entry. 
Page 3-44  
						

							Installation Forms 
TABLE 3-28 
ARS: NESTED DIGIT STRINGS 
SHEET -OF - 
LEADING DIGITS: RETURN DIAL TONE (YES/NO): - RESTRICTED COR GROUP: 
* Generic 1000 ** Generic 1001 
Notes: 
1. Specify the leading digits, the presence of dial tone and the restricted COR Groups. 
2. Specify the user dialed digits that require analysis, BEFORE routing occurs, in the 
DIGITS TO BE ANALYZED field. The total number of digits in the DIGITS TO BE 
ANALYZED field, the CITY TO FOLLOW field and LEADING DIGITS field in the previous 
form (refer to Table 3-27, ARS: Digits Strings) cannot exceed 26. Specify the number of 
user dialed digits that follow the analyzed digits in the QTY TO FOLLOW field. 
3. Wild card digits that can be included in the DIGITS TO BE ANALYZED field are: NOX, 
NlX and X where N is any digit from 2 to 9 and X is any digit from 0 to 9. 
The X wild card can be ‘used at the end of a digit string but not in the middle. The NOX, 
and NlX wild cards can only be used at the beginning of a digit string. 
4. Specify which entries require an account code with a YES in the ACC CODE REQD field. 
Users with COS Option 201 enabled (Account Code, Forced Entry - Long Distance 
Calls), must enter an account code. 
** Specify which entries are long distance (a YES in the ACC CODE REQD field). Users 
with COS Option 244 enabled (Room Status) and a Room Status condition of LOCAL 
are denied long distance calls. 
5. Specify the route termination and number for each entry. Enter ROUTE if for a Route, 
PLAN for a Route Plan and LIST for a Route List. 
Page 3-45  
						

							installation Forms 
TABLE 3-29 
FORM 27 - FORM ACCESS RESTRICTION DEFINITION 
SHEET 1 OF 2 
FORM NAME 1 INST 1 MAlNTl 1 MAINT2 1 SUPER 1 ATT 
I I I 
01 = SYSTEM CONFIGURATION 1 
I -- I 
R/W 
02 = FEATURE ACCESS CODES 
1 R/w 1 
I I 
I 
03 = COS DEFINE 1 RAN I 
04 = SYS OPTIONS/SYS TIMERS R/W 
05 = TENANT INTERCONNECTION 
TABLE R/W 
06 = TENANT NIGHT SWITCHING 
TIMERS RNV 
07 = CONSOLE ASSIGNMENTS R/W 
08 = All-ENDANT LDN ASGN RNV 
09 = STATION/SUPERSET@ SETS 1 R/W 
10 = PICKUP GROUPS 
11 = RESERVED 
12 = RESERVED R/W 
R/W 
I 
I I I 
R/W 
13 = TRUNK CIRCUIT DESC 
1 R/w 1 
I I 
I 
14 = NON-DIAL-IN TRUNKS 1 WA’ 1 I I I 
15 = DIAL-IN TRUNKS R/W 
16 = TRUNK GROUPS 
1 R/w 1 
I I 
I 
17 = HUNT GROUPS I I I 
I I 
18 = MISC SYSTEM PORTS 
R/W I I I I 
I 
19 = CALL REROUTING TABLE 
RMI 
20 = ARS: COR GRP DEFINITION 1 R/W I 
I I 
I 
21 = ARS: DAY ZONE DEFINITION I R/W I I I I 
22 = ARS: MODIFIED DGT TABLE 1 
I I 
R/W 
23 = ARS: ROUTE DEFINITION 
1 RNV 1 
I I I I I 
24 = ARS: ROUTE LIST R/W 
25 = ARS: ROUTE PLANS 
I R/W 
I 
-- I 
26 = ARS: DIGIT STRINGS 
I 
27 = FORi ACCESS RESTRICTION1 I 
I I I 
R/W 
28 = RESERVED 
1 R/w 1 
I I 
I 
29 = DEVICE INTERCONNECTION 
TABLE ** 
Page 3-46