Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide

Important Safety Instructions 
General Installation Summary 
This product is intended to operate from an electrical branch circuit 
source rated at 120 volts RMS, 60 Hz,1 5 amperes. 
This product shall only be situated in a clean and dry environment in 
accordance with the environmental and other installation 
requirements specified in the /rWa//af~o~ 
hforrmtion Pracfice. 
This product may not be provided with a power cord. Provision of a 
Dower cord (or replacement of a damaged/defective power cord)...

Safely Instructions 
l-4 Issue 1 Revision 0 March 1997  

VOICE OR DATA CARD cn VOICE OR DATA CARD 
K7 
VOICE OR DATA CARD m VOICE OR DATA CARD 
CA 
VOICE OR DATA CARD -4 
VOICE OR DATA CARD 
.b 
VOICE OR DATA CARD cm VOICE OR DATA CARD 
MAIN CONTROL 
BAY POWER SUPPLY 
BAY CONTROL CARD  

Safely instructions 
Equipment Grounding 
Redundant and independent equipment grounding conductors (see Note I) are to be 
installed between the product and the wiring system ground. 
One of the equipment’s grounding conductors shall be an insulated grounding 
conductor (see Note 2) that is not smaller in size and is equivalent in insulation material 
and thickness to the grounded and ungrounded branch circuit supply conductor, except 
that it is green, with or without one or more yellow stripes. The...

Important Safely Instructions 
FRONT PANEL 4 1 
FRONT VIEW 
(PANEL1 
POWER SUPPLY- 
PERIPHERAL- 
INTERFACE 
CARD 
BAY CONTROL - 
CARD 
t 
Ti ADAPTER 
ASSEMBLY 
MAIN CONTROL - 
%-PAIR AMPHENOL 
CONNECTOR 
INPUT POWER 
SYSTEM 1 
FldJRE - MAINTENANCE 
GROUND USE CONNECTOR 
PORT FOk SYSTEM 
FAIL TRANSFER UNIT 
Figure l-2 SX-200 ML Cabinet Ground Connection Point 
March 1997 
Issue 1 Revision 0 l-7  

Safely Instructions 
Approved Configurations of Product (United States Of America) 
This product has been evaluated and listed with Underwriters’ Laboratories 
Incorporated to their Standard for Safety 1459,“Telephone Equipment”, Second 
Edition. The following assemblies have been investigated and determined suitable for 
use in this product: 
I Marketing Number 
I Description / Common Name 
I 
9109-005000-SA UNIVERSAL CARD 
9109-008-000-SA BAY POWER SUPPLY 12OV 
9109-008-003-NA BAY POWER SUPPLY 240V...

Important Safety Instructions 
WARNING: ANY CONNECTION OF THE ASSEMBLIES LISTED BELOW TO AN OUTSIDE 
PLANT LEAD, AN OFF-PREMISE APPLICATION OR ANY OTHER EXPOSED 
PLANT APPLICATION MAY RESULT IN A FIRE OR SHOCK HAZARD, AND/OR 
DEFECTIVE OPERATION AND/OR EQUIPMENT DAMAGE. 
Marketing Number Description / Common Name 
9109-Ol O-OOO-SA ONS LINE CARD 
9109-Ol O-002-SA ONS LINE CARD 
9109-012-000-SA DIGITAL LINE CARD 
9109-Ol O-003-NA 
9109-012-002-NA ONS LINE CARD(for SX-,200 ML only) 
DIGITAL LINE CARD(for...

Safely Instructions 
l-10 issue 1 Revision 0 
March 1997  

Regulatory Notices 
NOTICE TO CANADIAN CUSTOMERS 
NOTICE: The Industry Canada label identifies certified equipment. This certification 
means that the equipment meets certain telecommunications network protective, 
operational, and safety requirementsas prescribed in the appropriate Terminal 
Equipment Technical Requirements document(s). The Department does not guarantee 
the equipment will operate to the user’s satisfaction. 
Before installing this equipment, users should ensure that it is permissible...

Safely Instructions 
NOTICE TO U.S. CUSTOMERS 
This SX-200 ML PAE3X equipment complies with Part 68 of the FCC rules. On the rear of this equipment is a label that contains, 
among other information, the FCC registration number and ringer equivalence number @EN) for this equipment. If requested, 
this information must be provided to the telephone company. 
The FCC Registration Number for the PABX equipment is: BN285B-64724-MF-E or BN259C-16891-MF-E depending upon the 
product’s country of manufacture...