NEC Dterm Series 1 Manual

– 35 –
To Logout 
Press the preassigned logout button on the terminal.
Note 1:This location is an example.
Note 2:Logout button is assigned by data setting at the PBX.
“LOGOUT?” is displayed on the LCD of the terminal.
 Press the logout button on the terminal again.
Note:The following pages describe how to use the PBX Features with the D
term
 IP. 
For detailed information pertaining to the D
term
 IP only, please refer to feature [I-43] IP Enabled D
term
 in the 
NEAX 2400 IPX Feature Programming Manual. 

– 36 –
To Originate an Outside Call
Lift handset or press Speaker key, receive dial tone.
Dial the Central Office access code (i.e. 9).
Dial desired telephone number.
Use handset or MIC to converse.
Display indicates:
To Originate an Internal Call
Lift handset or press Speaker key.
Receive dial tone.
Dial desired station number. Display indicates digits dialed.
Use handset or MIC to converse.
Multiline AppearanceTo originate
Press the MULTILINE APPEARANCE feature key.
Lift handset or press Speaker. Dial...

– 37 –
To Originate a Call Using Speed Calling (One-touch Speed Calling keys)
Press the desired One-Touch Speed Calling key, or press Speaker and One-Touch Speed Calling key.
To  p r o g r a m(Available only on D
term
 stations with One-Touch Speed Calling keys.)
Press Feature button.
Press desired One-Touch Speed Calling key.
Enter desired telephone number or feature access code on the keypad.
Display indicates the digits dialed.
Press Feature again to save the number.
To verify with D
term...

– 38 –
LCD Indication of D
term
16LD, D
term
16LDIP and 16LD ADM
(Available from Feature Package 20-100 R18 software or later version.) Press the desired One-Touch Speed Calling key and originate a call.
* Registered name will be displayed left-justified. For the buttons to which any 
names are not assigned, the character “SPD” will be displayed.
** Following chart shows the characters that are available for One-Touch Speed 
Calling keys.
?
! ] [
) ( & # #/ _ ; : ’ , . @ * *0 09 z y x w Z Y X W 98 v u t...

– 39 –
To Register Name On One-Touch Speed Calling Key(Available on D
term
 stations with One-Touch Speed Calling key and 16LD ADM, from Feature Package 20-100 
R18 software or later version.)
 Press NAME button.
 Press desired One-Touch Speed Calling key.
 Enter desired name on the keypad.
    Display indicates the name entered.
 Press SET to save the name.
Note 1) To delete the entry, press DEL or BK key and delete each one character.
Note 2) To delete the whole setting, press CLEAR key and back to...

– 40 –
To Originate a Call Using Speed Calling (-Station/Group)
Press the Redial button.
Press the desired speed calling number.
To Originate a Call Using Speed Calling – SystemTo program Speed Calling – System key (on One-Touch Speed Calling key)
Press Feature key.
Press desired One-Touch Speed Calling key. The LCD displays previously stored digits.
Dial the “Speed Calling – System” access code and the abbreviated call code.
Press Feature again. 
To operate from the Speed Calling – System key
Press the...

– 41 –
To Originate a Call Using Telephone Directory (16LD ADM)(Available from Feature Package 20-100 R18 software or later version.)
 Press DIR/Exit button and enter Directory mode.
 Press initial letter of desired telephone data.
 * For example, “S” in the right figure.
Note) Press DIR/Exit button to cancel
Note) When 20 seconds passed without any operation, back to normal sta-
tus (Expansion mode).
 Telephone data that start with the letter will be displayed by 16 entries. When there are no 
entries...

– 42 –
 Registered telephone number will be displayed.
 Press desired button and originate a call.
Note) The icon of originating telephone data, will turn black.
 When the call finished, back to normal status (Expansion 
mode) in 3~5 seconds.
Note 1) When telephone data is not registered to the button, no data will be displayed on 
LCD. Even pressing the button, the message “Directory entries empty. Please 
download from PC” will be displayed. 
Note 2) To register/delete/modify the telephone data, refer...

– 43 –
To Originate a Call Using Calling History(Available from Feature Package 20-100 R18 software or later version.)
Maximum 15 Calling histories can be stored in 16LD ADM.
 Press  button, then 15 Calling histories that have been originated from 16LD 
ADM, are displayed. 
 Press desired button and originate a call.
Note) Press DIR/Exit button to cancel.
Note) Last 15 Calling histories are displayed from new (at the 
top) to old.
Note) When originating a call, icon of the selected data will turn...

– 44 –
Account CodeTo  e n t e r
Lift handset or press Speaker, receive dial tone.
Enter feature access code, receive service set tone.
Enter “Account Code” (up to 10 digits). (Note 1)
Receive dial tone and dial desired number.
To enter account code after authorization code
Lift handset or press Speaker, receive dial tone.
Enter feature access code for “Authorization Code”, receive service set tone.
Enter “Authorization Code”, receive second service set tone.
Enter “Account Code”, receive dial tone, and...