NEC Dterm Series 1 Manual

– 55 –
Call ParkTo program call park key (on One-Touch Speed Calling key)
Press Feature.
Press One-Touch Speed Calling key.
Press Recall. ! displays on LCD.
Dial “Call Park” access code.
Press Feature again.
To park a call
While connected to a station or trunk, press CALL PARK.
To retrieve a parked call from originating station
Dial “Call Park” local retrieval code.
Station user is connected to parked call.
To retrieve a parked call from a remote station
Dial “Call Park” remote retrieval code and the...

– 56 –
Call Pick-up (Group)When station within pick-up group rings
Lift handset.
Press CALL PICK-UP or dial “Call Pick-up” access code (may be stored on One-Touch Speed Calling key).
Connection to calling party is established.
If currently on a call, press Transfer and dial “Call Pick-up” access code.
The original party is placed on hold.
Using the Soft Key
Lift handset and press PICK Soft Key.
Connection to calling party is established.
Call Pick-up (Direct)To program pick-up direct key (One-Touch Speed...

– 57 –
– Or –
Dial “Direct Call Pick-up” access code and the station number to be picked up.
Connection to calling party is established.
If busy, original call must be placed on hold before new call can be picked 
up.
Outgoing Trunk QueuingIf trunk busy
Receive Trunk Busy indication. Press CALL BACK. Call is placed in queue for next available trunk.
When trunk is available, setting station is alerted by ringing and flashing red 
LED.
Press Speaker or lift handset. Dial tone is heard or number is...

– 58 –
Executive OverrideIf called station is busy
Press OVERRIDE.
Interrupted parties receive warning tone.
Three-way conference is initiated.
Conf LED lights.
Using the Soft Key
Press E-OVR Soft Key.
Interrupted parties receive warning tone 
and three-way conference is initiated.
Note:Override may be programmed by the Telephony Server Admin. for one of the Programmable Feature keys, or may 
be programmed by the user on an One-touch Speed Calling key by storing the Recall and Override access code.
Last...

– 59 –
Call Forwarding – All CallsTo  s e t
Press Speaker. Receive dial tone.
If setting for another station, press MULTILINE APPEARANCE.
Press FWD or dial “Call Forwarding – All Calls” access code. Receive special dial tone.
Dial destination station or external telephone number. Receive service set tone.
FWD LED lights (at your station or at the D
term
 of the multiline station you 
are setting).
Press Speaker. Call Forwarding – All Calls is set.
Using the Soft Key
Press FDA Soft Key. Receive special...

– 60 –
To cancel
Press Speaker. Receive dial tone. If cancelling for another station, press 
MULTILINE APPEARANCE.
Press FWD or dial “Call Forwarding – All Calls” cancel code. 
Receive service set tone. LED goes out at your station
 (or the D
term
 of the multiline station).
Press Speaker. Call Forwarding – All Calls is cancelled.
Using the Soft Key
Press FDA Soft Key.
Receive service set tone and “FORWARD CANCEL” is displayed.
Call Forwarding – Busy LineTo  s e t
Press Speaker. Receive dial tone.
If...

– 61 –
Using the Soft Key
Press FDB Soft Key. Receive special dial tone.
Dial destination; wait for service set tone.
“FORWARD SET” is displayed; Call Forwarding – Busy Line is set.
To verify (with D
term
 4D/8D/16D/16LD/32D)
Press FWD-BY.
Display indicates the station number calls are forwarded to.
Note 1:If recipient station is a D
term
4D/8D/16D/16LD/32D, LCD displays:
Note 2:With Soft Key operation, FDB flashes on the display.
To cancel
Press Speaker. Receive dial tone. If cancelling for another...

– 62 –
Call Forwarding – Don’t AnswerTo  s e t
Press Speaker. Receive dial tone.
If setting for another station, press 
MULTILINE APPEARANCE
.
Press FWD-NA or dial “Call Forwarding – Don’t Answer” access code. Receive special dial tone.
Dial destination station or external telephone number. Receive service set tone.
FWD-NA LED lights (at your station or at the D
term
 of the multiline station you are setting).
Press Speaker. Call Forwarding – Don’t Answer is set.
Using the Soft Key
Press FDN Soft Key....

– 63 –
To cancel
Press Speaker. Receive dial tone. If cancelling for another station, press 
MULTILINE APPEARANCE.
Press FWD-NA or dial “Call Forwarding – Don’t Answer” cancel code. 
Receive service set tone. LED goes out at your station (or the D
term
 of the 
multiline station).
Press Speaker. Call Forwarding – Don’t Answer is cancelled.
Logged Out IP Station – Call DestinationTo  s e t
Lift handset or press Speaker key.
Press the FDL Key or dial “Logged Out IP Station – Call Destination” access code....

– 64 –
To cancel
Lift handset or press Speaker key; receive Dial Tone.
Press the FDL Key or dial “Logged Out IP Station – Call Destination” cancel code; receive service set tone.
Replace handset or press Speaker key. Logged Out IP Station – Call Desti-
nation is canceled.
Using the Soft Key
Lift handset or press Speaker key; receive Dial Tone.
Press FDL Soft Key; receive service set tone.
Dial destination station number; receive service set tone.
“Logged Out IP Station – Call Destination” lamp goes off...