Netgear C7100v High Speed Cable Modem Router User Manual
Have a look at the manual Netgear C7100v High Speed Cable Modem Router User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Troubleshooting 121 AC1900 Cable Modem Voice Router •tion of the IP address specified by the subnet mask) is different from the network address of the remote device. •tioning. •If your ISP assigned a host name to your computer, enter that host name as the account name on the Internet Setup page. •Yut one of your computers. ILFRQO\Irom the MAC address of ddress of a single o “clone” or “spoof” the MAC address from the authorized computer.
122 A A. Supplemental Information This appendix covers the following topics: •Factory Settings •Technical Specifications
Supplemental Information 123 AC1900 Cable Modem Voice Router Factory Settings Ye end of a paper clip or a similar object to press and hold the Reset button on the back of the modem router for at least seven seconds. The modem router resets and returns to the factory configuration settings shown in the following table. Table 3. Factory default settings FeatureDefault setting Modem router loginUser login URLwww.routerlogin.com or www.routerlogin.net User name (case-sensitive)admin Login password (case-sensitive)user-generated password Local network (LAN)LAN IP192.168.0.1 Subnet mask255.255.255.0 DHCP serverEnabled DHCP range192.168.0.2 to 192.168.0.254 DHCP starting IP addressConfigured by the Internet provider DHCP ending IP address192.168.0.254 DMZDisabled Time zoneAs per the ISP/MSO ToD (time of day) Configuration Time zone adjusted for daylight saving timeAs per ISP/MSO ToD (time of day) server configuration SNMPEnabled Cable modem firewallInbound (communications coming in from the Internet)Disabled (except traffic on port 80, the HTTP port) Outbound (communications going out to the Internet)Enabled (all) WiFiWiFi communicationEnabled SSID nameSee the product label SecurityWPA2-PSK (AES) Broadcast SSIDEnabled Country/regionUnited States RF channel (2.4 GHz)Auto1
Supplemental Information124 AC1900 Cable Modem Voice Router Technical Specifications Table 4. Modem router specifications FeatureDescription Data and routing protocols TCP/IP, DHCP, Dynamic DNS, UPnP, and SMB Internal power adapter (North America) 120V, 60 Hz, input 12V/3.5A DC output Dimensions 245.36 x 211 x 43.18 mm (9.66 x 8.31 x 1.7 in.) Weight Weight: 725.75 g (1.6 lb) Operating temperature 0° to 40°C (32º to 104ºF) Operating humidity 90% maximum relative humidity, noncondensing Electromagnetic emissions FCC Part 15 Class B LAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45 WAN 24 x 8 DOCSIS 3.0 WAN Interface Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. See the footnote for Table 3, Factory default settings. Radio data rates Auto Rate Sensing Data encoding standards IEEE 802.11ac 2.0 IEEE 802.11n version 2.0 IEEE 802.11n 256QAM IEEE 802.11g, IEEE 802.11b 2.4 GHz IEEE 802.11n, IEEE 802.11a 5.0 GHz Maximum computers per wireless network Limited by the amount of WiFi network traffic generated by each node (typically 50–70 nodes) Operating frequency range 2.4 GHz: 2.412–2.462 GHz 5 GHz: 5.18–5.24 + 5.745–5.825 GHz 802.11 security WPA-PSK, WPA2-PSK, and WPA+WPA2 WiFi (continued) RF channel (5 GHz) CH 153 (or manually select channels I and 4) Operating mode Up to 600 Mbps at 2.4 GHz, 1300 Mbps at 5 GHz 1. Maximum wireless signal rate derived from IEEE Standard 802.11 specif\ ications. Actual throughput can vary. Network conditions and environmental factors, including volume of network traffi\ c, building materials and construction, and network overhead, lower actual data throughput rate. Table 3. Factory default settings (continued) FeatureDefault setting