Netgear Dgn 2200 M Manual

Advanced Configuration91
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
To view or change these configurations, from the main menu, select 
Wireless Repeating 
Function : 

Advanced Configuration92
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
Point-to-Point Bridge Configuration
In point-to-point bridge mode, the wireless modem router communicates as\
 an access point 
with another bridge-mode wireless station. When used as a bridge, wirele\
ss client 
associations are disabled—only wired clients can be connected. You ne\
ed to enter the MAC 
address of the other bridge-mode wireless station in the field provided.\
 Use wireless security 
to protect this...

Advanced Configuration93
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Multi-Point Bridge 
Multi-point bridge mode allows a router to bridge to multiple peer acces\
s points 
simultaneously. Wireless client associations are disabled. Only wired cl\
ients can be 
connected. Multi-point bridge mode configuration includes the following \
steps:
1. 
Enter the MAC addresses of the other access points in the fields provide\
d. 
2.  Set the other bridge-mode access points to point-to-point bridge...

Advanced Configuration94
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
•     The LAN networks of the wireless modem router and other access points ar\
e 
configured to operate in the same LAN network address range as the LAN d\
evices.
•     Only one access point, the DGN2200M Mobile Edition wireless modem router\
 in  Figure
  2, Multi-point bridge mode , is configured in point-to-multi-point bridge mode; all 
the others are in point-to-point bridge mode.
•      All APs, including the...

Advanced Configuration95
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
The following figure shows an example of a repeater mode configuration.
Internet
Computers
Wireless computer
 
192.168.0.1
AP 1 (parent AP in repeater mode)
AP 3 in repeater mode  
Wireless computer
associated with AP 3
AP 2 in repeater mode associated with AP 2
Wireless computer
associated with AP 1
DGN2200M
 
Figure 3. Repeater mode

To set up a repeater with wireless client association:
1.  Configure the operating...

Advanced Configuration96
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
example, FTP or HTTP), to play Internet games (like Quake III), or to\
 use Internet 
applications (like CU-SeeMe).
•     Port triggering monitors outbound traffic. When the router detects traff\
ic on the specified 
outbound port, it remembers the IP address of the computer that sent the\
 data and 
triggers the incoming port. Incoming traffic on the triggered port is th\
en forwarded to the 
triggering computer. Port...

Advanced Configuration97
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
2. 
Select the Port Triggering radio button to display the following screen:\
3. Click  Add Service, and fill in the fields in the Add Service screen.
The service displays in the list. For more detailed information, see the\
 Port 
Forwarding/Port Triggering help.
Advanced USB Settings
For added security the router can be set up to share only approved USB d\
evices. To enable 
this feature, select  No, and click Apply ....

Advanced Configuration98
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic pa\
ssing through your 
wireless modem router’s Internet port. With the traffic meter utility\
, you can set limits for traffic 
volume, set a monthly limit, and get a live update of traffic usage.
To monitor traffic on your router:
1. 
Under Advanced on the main menu, select  Traffic Meter.
2. To enable the traffic meter, select the...

Advanced Configuration99
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
5. 
Set the traffic counter to begin at a specific time and date.
6.  Set up traffic control to issue a warning message before the monthly lim\
it of Mbytes or hours 
is reached. You can select one of the following to occur when the limit \
is attained:
•     The Internet LED flashes green or amber. 
•     The Internet connection is disconnected and disabled.
7.  Set up Internet traffic statistics to monitor the data...

100
7
7.   Troubleshooting
This chapter provides information about troubleshooting your N300 Wirele\
ss ADSL2+ Modem Router DGN2200M Mobile Edition. After each problem description, instruct\
ions are provided to 
help you diagnose and solve the problem. For the common problems listed,\
 go to the section 
indicated.
•     Is the router on?Go to Basic Functioning on page  101.
•     Have I connected the router correctly? Go to Basic Functioning on page  101.
•     What are the LEDs on the front panel...