Netgear Dm200 Broadband High Speed Dsl Modem User Manual

The user name is admin. The default password is password. The user name and password are
case-sensitive.
4. Click the 
OK button. The BASIC Home page displays a dashboard that lets you see the status of your Internet connection
and network at a glance. You can click any of the sections of the dashboard to view more detailed
information. The left column displays the menus, and at the top is an ADVANCED tab that you can use
to access more menus and pages.
Change the Language By default, the language is set...

To let the modem automatically update its firmware:
1.
Launch a web browser from a computer that is connected to the network.
2. Enter 
http://www.routerlogin.net.
A login window opens.
3. Enter the 
modem user name and password.
The user name is 
admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Wait for the modem
 to determine if newer firmware is available.
This process might take a few minutes. If the 
modem detects new firmware,...

The following figure shows an example of a genie app dashboard for a Windows computer. The modem
does not support WiFi or any WiFi features, the Parental Controls feature, and the ReadySHARE feature.
Install and Access the Modem
23
Broadband High-Speed DSL Modem Model DM200 

3
Manage the Internet Settings Manually
This chapter describes how you can manage the Internet settings of the  modem manually.
Usually, the quickest way to set up the modem is to allow the 
NETGEAR installation assistant to detect the
Inter
net connection when you first access the modem with a web browser. This option is described in Install and
Access the Modem
 on page 11. You can also customize or specify your Internet settings manually.
The chapter contains the f
ollowing sections:
• Use the...

Use the Internet Setup Wizard After Initial Setup
You can use the Setup Wizard to detect your Internet settings and automatically set up your modem. The Setup Wizard is the same as the NETGEAR installation assistant, which launches\
the first time you connect to your modem.
Note
The Setup 
Wizard can detect the type of ISP connection and presents pages on which\
 you can you enter
the required information. The following procedure describes common steps that you must follow for most
ISPs, but also...

8.
Click the Next button.
The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP
configuration. When the 
modem is connected to the Internet, the Congratulations! page displays, and you successfully
completed the setup process . If the Congratulations! page does not display, other pages might display and you might need to provide
more information, in which case you must continue with Step 9. The pages that display depend on your
type of ISP connection and...

The Setup Wizard performs a full scan, which might take up to six minutes.
10.
(Only if the page in the following figure displays) Specify how to manage problems with the detection
of the Internet connection.
The page that might display states that a problem occurred while the wizard was detecting the Internet
connection. If this page does not display, continue with Step 11. Take one of the following actions:
•
If you need to power cycle the modem, do so now:
a. Unplug y
our 
modem’s power, leaving the...

11.
(Only if the page in the following figure displays) Specify how to manage problems with the detection
of the IP address for the Internet connection.
The page that might display states that a problem occurred while the wizard was detecting the Internet
connection IP address. If this page does not display, continue with Step 12. Take one of the following actions:
•
If your ISP assigned you a fixed (static) IP address, do the following:
a. Select the Yes radio button.
b. Clic
k the Next button. c.
Enter...

a.
Select either the No or the I don’t know radio button.
b. Clic
k the Next
 button. c.
Enter the MAC address of the computer or router with which you previously were able to connect
to the Internet.
You might find the MAC address on the product label of your device. Enter the MAC address in
the AABBCCDDEEFF format, not in the AA:BB:CC:DD:EE:FF format.
d. Click the 
Next button.
12. If the Cong
ratulations! page still does not display and the modem still does not connect to the Internet,
do the...

Specify an ADSL Connection Without a Login
If you want to manually configure the ADSL connection settings, use the information that your Internet service
provider (ISP) gave you to connect to your Internet service. If you cannot find this information, contact your
ISP. Entering incorrect information might prevent the modem from connecting to the Internet.
If your ISP supports two virtual interfaces (one Internet virtual interface and one IPTV
virtual interface), either you can connect a computer or...