Netgear N150 Manual

Technical Specifications37
Technical Specifications
Default Configuration Settings
This section provides factory default settings and technical specifications for the N150 Wireless 
Router Model WNR1000v2h2.
Table 3.  Home Router Default Configuration Settings 
FeatureDefault Setting
Router Login
Router Login URL http://www. routerlogin.net; 
http://www.routerlogin.com; or http://192.168.1.1
Login Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address...

Technical Specifications38
Wireless
Wireless Communication Enabled
SSID Name NETGEAR
Security Disabled
Broadcast SSID Enabled
Transmission Speed Auto
a
Country/Region United States (North America only; otherwise varies 
by country and region)
RF Channel 11 in North America, 13 in most other regions
Operating Mode Up to 150 Mbps
Data Rate Best
Output Power Full
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network 
conditions and...

Technical Specifications39
Restoring the Default Password and Configuration 
Settings
You can restore the factory default configuration settings that reset the router’s user name to 
admin, the password to password, and the IP address to 192.168.1.1. 
To restore the factory default configuration settings:
1.
Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings 
button, located on the rear panel of the router, for about 5 seconds, until the Power light begins 
to...

Related Documents40
Related Documents
This section provides links to reference documents that you can use to gain a more complete 
understanding of the technologies used in your NETGEAR product.
Table 4.  Related Documents
DocumentLink
Internet Networking and 
TCP/IP Addressing
http://documentation.netgear.com/reference/enu/tcpip/index.htm
Preparing a Computer 
for Network Accesshttp://documentation.netgear.com/reference/enu/wsdhcp/index.htm...

41
Registration and Certifications
Product Registration, Support, and Documentation 
Register your product at http://www.NETGEAR.com/register. You must register before you can use our telephone 
support service. Product updates and Web support are always available by going to: http://www.NETGEAR.com/support. 
Setup documentation is available on the CD, on the support website, and on the documentation website. When the 
wireless router is connected to the Internet, click the KnowledgeBase link to view...