Nikon Camera D810 Users Manual

							377
Select Save settings  to save the following settings to the 
memory card, or to the memory ca rd in the primary card slot if 
two memory cards are inserted ( 086; if the card is full, an error 
will be displayed).
 Use this option to share settings among D810 
cameras.
Save/Load Settings
G  button ➜Bsetup menu
MenuOption
Playback Playback display options
Image review
After delete
Rotate tall
Shooting 
(all banks) Shooting menu bank
Extended menu banks
File naming
Primary slot selection
Secondary slot function
Image quality
JPEG/TIFF recording
NEF (RAW) recording
Image area
White balance (with fine-tuning and presets d-1–d-6)
Set Picture Control (Custom Pi
cture Controls are saved as Standard)
Color space
Active D-Lighting
Vignette control
Auto distortion control
Long exposure NR 
						

							378
Settings saved using this model of camera can be restored by 
selecting Load settings .
 Note that Save/load settings  is only 
available when a memory card is inserted in the camera, and 
that the  Load settings  option is only available if the card 
contains saved settings.
Shooting 
(all banks) High ISO NR
ISO sensitivity settings
Movie settings
Custom settings  (all banks) All Custom Settings
Setup Clean image sensor
Flicker reduction
Time zone and date (exc
epting date and time)
Language
Auto image rotation
Image comment
Copyright information
Non-CPU lens data
HDMI
Location data
Eye-Fi upload
My Menu/
Recent Settings All My Menu items
All recent settings
Choose tab
ASaved Settings
Settings are saved in a file named NCSETUPF. The camera will not be 
able to load settings if the file name is changed.
MenuOption 
						

							379
Display roll and pitch information based on information from 
the camera tilt sensor.
 If the camera is tilted neither left nor 
right, the roll reference line will turn green, while if the camera is 
tilted neither forward nor back, the dot in the center of the 
display will turn green.
 Each division is equivalent to about 5 °.
Virtual Horizon
G  button ➜Bsetup menu
Camera level Camera tilted left or 
rightCamera tilted forward 
or back
DTilting the Camera
The virtual horizon display is not accurate when the camera is tilted at 
a sharp angle forward or back.
 If the camera is unable to measure tilt, 
the amount of tilt will not be displayed.
ASee Also
For information on viewing a virtual horizon display in the viewfinder, 
see Custom Setting f4 ( Assign Fn button> Press ; 0 343, 347).
 For 
information on displaying a virtual horizon in live view, see pages 46 
and 58. 
						

							380
Fine-tune focus for up to 20 lens types. AF tuning is not 
recommended in most situations and may interfere with normal 
focus; use only when required. 
AF Fine-Tune
G  button ➜Bsetup menu
OptionDescription
AF fine-tune  (On/Off ) •
On : Turn AF tuning on.
• Off : Turn AF tuning off.
Saved value Tune AF for the current lens 
(CPU lenses only). Press 
1 
or  3 to choose a value 
between +20 and –20. 
Values for up to 20 lens 
types can be stored. Only 
one value can be stored for 
each type of lens.
Default Choose the AF tuning value 
used when no previously 
saved value exists for the 
current lens (CPU lenses 
only).
Move focal point 
away from 
camera.
Current 
value
Move focal 
point toward 
camera. Previous 
value 
						

							381
List saved values List previously saved AF tuning values. To delete a lens 
from the list, highlight the desired lens and press 
O (Q ). To 
change a lens identifier (for example, to choose an 
identifier that is the same as  the last two digits of the lens 
serial number to distinguish it from other lenses of the 
same type in light of the fact that  Saved value can be used 
with only one lens of each ty pe), highlight the desired lens 
and press  2.
The menu shown at right will be 
displayed; press  1 or  3 to 
choose an identifier and press 
J  to save changes and exit.
DAF Tuning
The camera may be unable to focus at minimum range or at infinity 
when AF tuning is applied.
DLive View
Tuning is not applied to au tofocus during live view (035).
ASaved Value
Only one value can be stored for each type of lens. If a teleconverter is 
used, separate values can be stored for each combination of lens and 
teleconverter.
OptionDescription 
						

							382
This option is displayed only when an Eye-Fi memory card 
(available separately from third-party suppliers) is inserted in the 
camera.
 Choose  Enable to upload photographs to a preselected 
destination.
 Note that pictures will not be uploaded if signal 
strength is insufficient.
Observe all local laws concerning wireless devices and choose 
Disable  where wireless devices are prohibited.
Eye-Fi Upload
G button ➜Bsetup menu
DEye-Fi Cards
Eye-Fi cards may emit wireless signals when  Disable is selected. If a 
warning is displayed in the monitor ( 0470), turn the camera off and 
remove the card.
Set Custom Setting c2 ( Standby timer, 0 319) to 30 s or more when 
using an Eye-Fi card.
See the manual provided with the Eye-Fi card, and direct any inquiries 
to the manufacturer.
 The camera can be used to turn Eye-Fi cards on 
and off, but may not support other Eye-Fi functions. 
						

							383
When an Eye-Fi card is inserted, its status 
is indicated by an icon in the information 
display:
•d : Eye-Fi upload disabled.
• e : Eye-Fi upload enabled but no 
pictures available for upload.
• f  (static): Eye-Fi upload enabled; 
waiting to begin upload.
• f  (animated): Eye-Fi upload enabled; uploading data.
• g : Error — camera can not control Eye-Fi card.
 If a flashing 
W  appears in the control panel or viewfinder, refer to page 
470; if this indicator is not flashing, pictures can be taken 
normally but you may be unable to change Eye-Fi settings.
View the current camera firmware version.
ASupported Eye-Fi Cards
Some cards may not be available in some countries or regions; consult 
the manufacturer for more information.
 Eye-Fi cards are for use only in 
the country of purchase. Be sure the Eye-Fi card firmware has been 
updated to the latest version.
Firmware Version
G  button ➜Bsetup menu 
						

							384
To display the retouch menu, press G and select the  N 
(retouch menu) tab.
Retouch Menu Options
The options in the retouch menu are used to create trimmed, or 
retouched copies of existing pictures.
 The retouch menu is only 
displayed when a memory card containing photographs other 
than small NEF (RAW) images is inserted in the camera.
1 Can only be selected by pressing  G and selecting  N tab.
2 Available only if  b button is pressed in full-frame playba ck when a retouched image or original 
is displayed.
N The Retouch Menu:  Creating Retouched Copies
G button
Option0
iD-Lighting 388
jRed-eye correction389
kTrim390
lMonochrome392
mFilter effects393
nColor balance394
oImage overlay1395
7NEF (RAW) processing399
8Resize401
YQuick retouch404
ZStraighten404
aDistortion control405
bFisheye406
cColor outline406
dColor sketch407
ePerspective control408
fMiniature effect409
gSelective color410
9Edit movie 67
pSide-by-side comparison2412
Option0 
						

							385
Creating Retouched Copies
To create a retouched copy:
1Select an item in the retouch menu.
Press 1 or  3 to highlight an item,  2 
to select.
2Select a picture.
Highlight a picture and press  J.
 To  
view the highlighted picture full 
screen, press and hold the  X button.
To view images in other locations, 
press  W and select the desired card 
and folder as described on page 237.
ARetouch
In the case of images recorded at image quality settings of NEF + 
JPEG, only the NEF (RAW )  image will be retouched.
 The camera 
may not be able to display or retouch images created with other 
devices. 
						

							386
3Select retouch options.
For more information, see the section for the selected item.
 
To exit without creating a retouched copy, press G.
4Create a retouched copy.
Press  J to create a retouched copy.
 
Retouched copies are indicated by a 
N  icon.
AMonitor off Delay
The monitor will turn off and the operation will be cancelled if no 
actions are performed for a brief period.
 Any unsaved changes will 
be lost. To increase the time the monitor remains on, choose a 
longer menu display time for Custom Setting c4 ( Monitor off 
delay , 0 320).
ACreating Retouched Co pies During Playback
Retouched copies can also be created during playback.
Display picture full  frame and press  b.Highlight an option 
and press  J.Create retouched 
copy.