Nikon Camera D810 Users Manual

							387
DSmall NEF (RAW) + JPEG Images
If the JPEG copies of small NEF (RAW ) images taken at image quality 
settings of NEF (RAW ) + JPEG are recorded to the same memory card 
( 0 86), neither the NEF (RAW ) images nor the JPEG copies can be 
edited.
DRetouching Copies
Most options can be applied to copies created using other retouch 
options, although with the exceptions of  Image overlay and 
Edit movie > Choose start/end point  each option can be applied 
only once (note that multiple edits may result in loss of detail).
 Options 
that can not be applied to the current image can not be selected.
AImage Quality
Except in the case of copies created with  Tr i m, Image overlay , NEF 
(RAW) processing , and Resize , copies created from JPEG images are 
the same size and quality as the original, copies created from NEF 
(RAW ) photos are saved as large fine-quality JPEG images, and copies 
created from TIFF (RGB) photos are saved as fine-quality JPEG images 
of the same size as the original.
 Size-priority compression is used 
when copies are saved in JPEG format. 
						

							388
D-Lighting brightens shadows, making it ideal for dark or backlit 
photographs.
Press  4 or  2 to choose the amount of 
correction performed.
 The effect can be 
previewed in the edit display.
 Press  J to 
save the retouched copy.
D-Lighting
G  button ➜Nretouch menu
Before After 
						

							389
This option is used to correct “red-eye” caused by the flash and is 
available only with photographs taken using a flash.
 The 
photograph selected for red-eye correction can be previewed in 
the edit display.
 Confirm the effects of red-eye correction and 
create a copy as described in the following table.
 Note that 
red-eye correction may not always produce the expected results 
and may in ver y rare circumstances be applied to por tions of the 
image that are not affected by red-eye; check the preview 
thoroughly before proceeding.
Red-Eye Correction
G  button ➜Nretouch menu
ToUseDescription
Zoom in
XPress  X to zoom in,  W to zoom out. While 
photo is zoomed in, use multi selector to view 
areas of image not visible in monitor.
 Keep 
multi selector pressed to  scroll rapidly to other 
areas of frame.
 Navigation window is 
displayed when zoom buttons or multi 
selector are pressed; area currently visible in 
monitor is indicated by yellow border.
 Press  J 
to cancel zoom.
Zoom out
W
View other areas 
of image
Cancel zoom
J
Create copyJ
If the camera detects red-eye in the selected 
photograph, a copy will be created that has 
been processed to reduce its effects.
 No copy 
will be created if the camera is unable to 
detect red-eye. 
						

							390
Create a cropped copy of the selected 
photograph.
 The selected photograph 
is displayed with the selected crop 
shown in yellow; create a cropped copy 
as described in the following table.
Trim
G  button ➜Nretouch menu
ToUseDescription
Reduce size of  crop
WPress  W to reduce the size of the crop.
Increase size of  crop
XPress  X to increase the size of the crop.
Change crop  aspect ratio Rotate the main command dial to choose the 
aspect ratio.
Position crop Use multi selector to position the crop.
 Press 
and hold to move the crop rapidly to the 
desired position.
Preview crop Press center of multi selector to preview 
cropped image.
Create copy
JSave the current crop as a separate file. 
						

							391
ATrim: Image Quality and Size
Copies created from NEF (RAW ), NEF 
(RAW ) + JPEG, or TIFF (RGB) photos have an 
image quality ( 079) of JPEG fine; cropped 
copies created from JPEG photos have the 
same image quality as the original.
 The size 
of the copy varies with crop size and aspect 
ratio and appears at upper left in the crop 
display.
AViewing Cropped Copies
Playback zoom may not be available when cropped copies are 
displayed. 
						

							392
Copy photographs in Black-and-white, 
Sepia , or Cyanotype  (blue and white 
monochrome).
Selecting  Sepia or Cyanotype  displays 
a preview of the selected image; press  1 
to increase color saturation,  3 to 
decrease.
 Press  J to create a 
monochrome copy.
Monochrome
G  button ➜Nretouch menu
Increase saturation
Decrease saturation 
						

							393
Choose from the following filter effects. After adjusting filter 
effects as described below, press  J to save the retouched copy.
Filter Effects
G  button ➜Nretouch menu
OptionDescription
Skylight Creates the effect of a skylight 
filter, making the picture less blue.
 The effect can be previewed in 
the monitor as shown at right.
Warm filter Creates a copy with warm tone 
filter effects, giving the copy a 
“warm” red cast.
 The effect can be 
previewed in the monitor.
Red 
intensifier Intensify reds (
Red intensifier ), 
greens ( Green intensifier ), or 
blues ( Blue intensifier ).
 Press 1 
to increase the effect,  3 to 
decrease.
Green 
intensifier
Blue 
intensifier
Cross 
screen Add starburst effects to light 
sources.
•
Number of points : Choose from 
four, six, or eight.
• Filter amount : Choose the 
brightness of the light sources 
affected.
• Filter angle : Choose the angle of the points.
• Length of points : Choose the length of points.
• Confirm : Preview the effects of the filter.
 Press X to preview 
the copy full frame.
• Save : Create a retouched copy. 
						

							394
Use the multi selector to create a copy 
with modified color balance as shown 
below.
 The effect is displayed in the 
monitor together with red, green, and 
blue histograms ( 0241) giving the 
distribution of tones in the copy.
 Press  J 
to save the retouched copy.
Soft Add a soft filter effect.
 Press 
4 or 
2  to choose the filter strength.
Color Balance
G  button ➜Nretouch menu
Increase amount of green
Increase amount of blue Increase amount of amber Increase amount of magenta
OptionDescription 
						

							395
Image overlay combines two existing NEF (RAW ) photographs to 
create a single picture that is saved separately from the originals; 
the results, which make use of RAW data from the camera image 
sensor, are noticeably better than photographs combined in an 
imaging application.
 The new picture is saved at current image 
quality and size settings; before creating an overlay, set image 
quality and size ( 079, 83; all options are available).
 To  c r e a t e  a  
NEF (RAW ) copy, choose an image quality of  NEF (RAW) and an 
image size of  Large (the overlay will be saved as a large NEF/
RAW image even if  Small is selected).
AZoom
To zoom in on the image displayed in the 
monitor, press  X.
 The histogram will be 
updated to show data only for the portion 
of the image displayed in the monitor.
 While the image is zoomed in, press 
L (Z /Q ) to toggle back and forth 
between color balance and zoom.
 When 
zoom is selected, you can zoom in and out with the  X and  W buttons 
and scroll the image with the multi selector.
Image Overlay
G  button ➜Nretouch menu
+ 
						

							396
1Select Image overlay .
Highlight  Image overlay  in the 
retouch menu and press  2.
 The 
dialog shown at right will be 
displayed, with  Image 1 highlighted; 
press  J to display a picture selection 
dialog listing only large NEF (RAW) 
images created with this camera (small NEF/RAW images can 
not be selected).
2Select the first image.
Use the multi selector to highlight 
the first photograph in the overlay.
 
To view the highlighted photograph 
full frame, press and hold the  X 
button.
 To view images in other 
locations, press  W and select the 
desired card and folder as described on page 237.
 Press  J to 
select the highlighted photograph and return to the preview 
display.
3Select the second image.
The selected image will appear as  Image 1.
 Highlight 
Image 2  and press  J, then select the second photo as 
described in Step 2.