Nikon D7000 User Manual

							
181
Q
Wireless and Ethernet Networks
If the optional WT-4 wireless transmitter (0280) is attached, photographs can be 
transferred or printed over wireless or Ethernet networks and the camera can also be 
controlled from network computers running Camera Control Pro 2 (available 
separately).
 The WT-4 can be used in any of the following modes:
For more information, see the WT-4 user’s manual.
 Be sure to update to the latest 
versions of the WT-4 firmware and supplied software.
ModeFunction
Transfer mode Upload new or existing photographs to computer or ftp server.
Thumbnail select  mode Preview photographs on computer monitor before upload.
PC mode Control camera from computer using Camera Control Pro 2 (available 
separately).
Print mode Print JPEG photographs on printer connected to network computer.
ATransfer Mode
When the WT-4 is connected to the camera in transfer mode, the picture currently displayed 
in full-frame playback can be uploaded to the computer by pressing the  D and  J buttons.
AMovies
The WT-4 can be used to upload movies in transfer mode if  Auto send or Send folder  is not 
selected for  Transfer settings .
 Movies can not be uploaded in thumbnail selector mode.
ARecording and Viewing Movies During Transfer
Movies can not be recorded or played back  in image transfer mode when a WT-4 is 
connected to the camera (“image transfer mode” applies when images are being transferred 
and when images remain to be sent).
AThumbnail Select Mode
Camera settings can not be changed from  the computer in thumbnail select mode.
ACamera Control Pro 2
Camera Control Pro 2 software (available separately) can be used to control the camera from 
a computer.
 When Camera Control Pro 2 is used to capture photographs directly to the 
computer, the PC connection indicator ( c) will appear in the control panel. 
						

							
182
Q
Printing Photographs
To print selected JPEG pictures on a PictBridge printer via a direct USB connection, 
follow the steps below.
Connecting the Printer
Connect the camera using the supplied UC-E4 USB cable.
1Tur n th e  came ra of f.
2Connect the US B cable.
Turn the printer on and conn ect the USB cable as shown. Do not use force or 
attempt to insert the connectors at an angle.
Take photographs
Select photographs for printing using  Print set (DPOF) 
( 0 189)
Connect camera to printer (see below)
Print photographs one at a 
time (0183) Print multiple photographs 
(0 185) Create index prints 
(0 188)
Disconnect USB cable
APrinting Via Direct USB Connection
Be sure the EN-EL15 battery is fully charged  or use an optional EH-5a AC adapter and EP-5B 
power connector.
 When taking photographs to be printed via direct USB connection, set 
Color space  to sRGB  (0 141).
DUSB Hubs
Connect the camera directly to the printer; do not connect the cable via a USB hub. 
						

							
183
Q
3Tu rn  t he  came ra o n.
 A welcome screen will be displayed in the monitor, followed by a PictBridge 
playback display.
Printing Pictures One at a Time
1Select a picture.
Press 4 or  2 to view additional pictures, or press 
1  or  3 to view photo information ( 0165).
 Press 
the  X button to zoom in on the current frame 
( 0 173; press  K to exit zoom).
 To view six 
pictures at a time, press the  W button.
 Use the 
multi selector to highlight pictures, or press  X to display the highlighted picture 
full frame; to view images in  other locations, hold the D button, press  1, and 
select the desired card and fold er as described on page 164.
2Display printing options.
Press J to display PictBridge printing options. 
						

							
184
Q
3Adjust printing options.
Press 1 or  3 to highlight an option and press  2 to select.
OptionDescription
Page size Menu of page sizes will be displayed (options not 
supported by current printer are not listed).
 Press 
1 or 
3  to choose page size (to print at default page size for 
current printer, select  Printer default), then press J to 
select and return to previous menu.
No.
 of 
copies Menu shown at right will be displayed. Press 
1 or  3 to 
choose number of copies (maximum 99), then press  J 
to select and return to previous menu.
Border This option is available only if supported by current 
printer.
 Menu shown at right will be displayed. Press 
1 
or  3 to choose print style from  Printer default (print 
using current printer settings),  Print with border (print 
photo with white border), or  No border, then press 
J 
to select and return to previous menu.
 Only options 
supported by current printer will be displayed.
Time 
stamp Menu shown at right will be displayed.
 Press 
1 or  3 to 
choose  Printer default  (print using current printer 
settings),  Print time stamp  (print time and date of 
recording on photo), or  No time stamp, then press 
J to 
select and return to previous menu.
Cropping This option is available only with printers that support 
cropping.
 Menu shown at right will be displayed. To  e x i t  
without cropping picture, highlight  No cropping and 
press 
J. To crop picture, highlight  Crop and press  2.
If  Crop  is selected, dialog shown at right will be 
displayed.
 Press  X to increase size of crop,  W to 
decrease.
 Choose position of crop using multi selector 
and press 
J. Note that print quality may drop if small 
crops are printed at large sizes. 
						

							
185
Q
4Start printing.
Select Start printing  and press J to start 
printing.
 To cancel before all copies have been 
printed, press  J.
Printing Multiple Pictures
1Display the Pict Bridge menu.
Press the  G button in the PictBridge 
playback display (see  Step 3 on page 183).
2Choose an option.
Highlight one of the following options and 
press 2.
• Print select : Select pictures for printing.
• Select date : Print one copy of all the pictures 
taken on a selected date.
• Print (DPOF) : Print an existing print order created with the  Print set (DPOF) 
option in the playback menu ( 0189).
 The current print order will be 
displayed in Step 3.
To create an index print of all JPEG pictures on the memory card, select  Index 
print .
 See page 188 for more information.
DNEF (RAW)
NEF (RAW ) photographs ( 085) can not be printed by direct USB connection.
 JPEG copies of 
NEF (RAW ) images can be created using the  NEF (RAW) processing option in the retouch 
menu ( 0258).
DConnecting Cables
Be sure the camera is off when connec ting or disconnecting interface cables.
 Do not use 
force or attempt to insert the connectors at an angle.
 Close the camera connector cover 
when the connector is not in use.
G  button 
						

							
186
Q
3Select pictures or choose a date.
If you chose Print select  or Print (DPOF)  in 
Step 2 , use the multi selector to scroll through 
the pictures on the memory card; to view 
images in other locations, hold the  D 
button, press  1, and select the desired card 
and folder as desc ribed on page 164.
 To  
display the current picture full screen, press 
and hold the  X button.
 To select the current 
picture for printing, hold the  W button and 
press  1.
 The picture will be marked with a 
Z  icon and the number of prints will be set 
to 1.
 Keeping the  W button pressed, press 
1  or  3 to specify the number of prints (up to 
99; to deselect the picture, press  3 when the 
number of prints is 1).
 Continue until all the 
desired pictures have been selected.
If you chose  Select date  in Step 2, press 1 or  3 
to highlight a date and press  2 to toggle the 
highlighted date on or off.
 To view the 
pictures taken on the selected date, press 
W .
 Use the multi selector to scroll through 
the pictures, or press and hold  X to view the 
current picture full screen.
 Press  W again to 
return to the date selection dialog.
DSelecting Photographs for Printing
NEF (RAW ) photographs ( 085) can not be 
selected for printing.
 JPEG copies of NEF (RAW ) 
images can be created using the  NEF (RAW) 
processing  option in the retouch menu 
( 0 258).
W  + 13 : Choose number of copies
X  button : View photo full screen
W button : View 
photos for selected 
date
X  button : View 
highlighted photo 
full screen 
						

							
187
Q
4Display printing options.
Press J to display PictBridge printing 
options.
5Adjust printing options.
Press  1 or  3 to highlight an option and press  2 to select.
6Start printing.
Select  Start printing  and press J to start 
printing.
 To cancel before all copies have 
been printed, press  J.
OptionDescription
Page  size Menu of page sizes will be displayed (
0184; options not supported by current 
printer are not listed).
 Press  1 or  3 to choose page size (to print at default page 
size for current printer, select  Printer default), then press 
J to select and return 
to previous menu.
Border Menu of border options will be displayed (
0184; options not supported by 
current printer are not listed).
 Press  1 or  3 to choose print style from  Printer 
default  (print at current printer settings),  Print with border (print photo with 
white border), or  No border, then press  J to select and return to previous 
menu.
Time 
stamp Menu of time stamp options will be displayed (
0184).
 Press  1 or  3 to choose 
Printer default  (print at current printer settings),  Print time stamp (print time 
and date of recording on photo), or  No time stamp, then press J to select and 
return to previous menu.
AErrors
See page 308 for information on what to do if an error occurs during printing. 
						

							
188
Q
Creating Index Prints
To create an index print of all JPEG pictures on the memory card, select  Index print 
in Step 2 of “Printing Multiple Pictures” ( 0185).
 Note that if the memory card 
contains more than 256 pictures, only the first 256 images will be printed.
1Select  Index print .
Selecting Index print  in the PictBridge menu 
( 0 185) displays the images on the memory card 
as shown at right.
2Display printing options.
Press  J to display PictBridge printing options.
3Adjust printing options.
Choose page size, border,  and time stamp options as described on page 187 (a 
warning will be displayed if the selected page size is too small).
4Start printing.
Select  Start printing  and press J to start 
printing.
 To cancel before printing is complete, 
press  J. 
						

							
189
Q
Creating a DPOF Print Order: Print Set
The Print set (DPOF)  option in the playback menu is used to create digital “print 
orders” for PictBridge-compatible printers and devices that support DPOF.
1Choose  Select/set  for the Print set 
(DPOF)  item in the playback menu.
Press the  G button and select  Print set 
(DPOF)  in the playback menu.
 Highlight 
Select/set  and press  2 (to remove all 
photographs from the print order, select 
Deselect all? ).
2Select pictures.
Use the multi selector to scroll through the 
pictures on the memory card (to view 
images in other lo cations, hold the D 
button and press  1).
 To display the current 
picture in full screen, press and hold the  X 
button.
 To select the current picture for 
printing, hold the  W button and press  1.
 
The picture will be marked with a  Z icon and 
the number of prints will be set to 1.
 
Keeping the  W button pressed, press  1 or 
3  to specify the number of prints (up to 99; 
to deselect the picture, press  3 when the 
number of prints is 1).
 Continue until all the 
desired pictures have been selected.
3Display imprint options.
Press  J to display data imprint options.
G  button
W + 13 : Choose number of copies
X  button : View photo full screen 
						

							
190
Q
4Select imprint options.
Highlight the following options and press 2 
to toggle the highlighted option on or off (to 
complete the print order without including 
this information, proceed to Step 5).
• Data imprint : Print shutter speed and 
aperture on all pictures in print order.
• Imprint date : Print date of recording on all pictures in print order.
5Complete the print order.
Highlight Done and press  J to complete 
the print order.
DPrint Set (DPOF)
To print the current print order when the camera is connected to a PictBridge printer, select 
Print (DPOF)  in the PictBridge menu and follow the steps in “Printing Multiple Pictures” to 
modify and print the current order ( 0185).
 DPOF date and data imprint options are not 
supported when printing via direct USB connection; to print the date of recording on 
photographs in the current print order, use the PictBridge  Time stamp option.
The  Print set (DPOF)  option can not be used if there is not enough space on the memory 
card to store the print order.
NEF (RAW ) photographs ( 085) can not be selected using this option.
 JPEG copies of NEF 
(RAW ) images can be created using the  NEF (RAW) processing option in the retouch menu 
( 0 258).
Print orders may not print correctly if images are deleted using a computer or other device 
after the print order is created.