Nitsuko Digital System Administrators Guide

Administrator’s Guide
Digital
System
ONLNadcov.qxd  12/8/97 1:57 PM  Page 1 

l
Provides on-line viewing and printing.
l
Extensive search and navigation capabilities.
l
Ensures more timely turnaround of documents.
l
When we provide an Acrobat manual with a product (e.g., Nitsuko TAPI Driver),
you are assured of having the most up-to-date manual available.
l
With the installation of a PC fax/modem, it makes faxing of any brochure, user
guide, proposal or manual quick and easy.
l
Acrobat Reader programs for Macintosh, DOS and UNIX platforms also can be
provided, if required.
l
For...

l
In 
Edit îPreferences îGeneral, set the following:
–Default Magnification= Fit Width
–Display Splash Screen at Startup= Disabled (box not checked)
–Display Open Dialog Box at Startup= Disabled (box not checked)
l
For easiest reading on-screen, select ViewîFit Width(or Ctrl K). This option
is automatically enabled if you set the 
Default Magnification
in General
Preferences as described above.
l
To return to the opening screen at any time, press Home.
To scroll up or down on a page, press PageDownor...

Contents
lInitializing a New Digital System
lStart-up Programming
lIntroduction
lFeatures
lPrograms
pkycont.qxd  12/8/97 2:19 PM  Page 1 

Administrator’s Guide
N1872ADG03
Digital
System
dsadcov  12/1/97 4:30 PM  Page 1 

This manual has been developed by Nitsuko America.  It is intended for the use of its
customers and service personnel, and should be read in its entirety before attempting
to install or program the system.  Any comments or suggestions for improving this
manual would be appreciated.  Forward your remarks to:
Nitsuko America, Telecom Division
4 Forest Parkway
Shelton, CT  06484
Attention:  Manager, Technical Publications
Nothing contained in this manual shall be deemed to be, and this manual does not...

Initializing a New DIGITAL SYSTEM
You must initialize your system (i.e., run Program 20) before using it for the first time.
Initialization automatically enables the factory-installed Default Programming.
CAUTION: Initialization erases all the system programming
and replaces it with the factory-installed default settings.
To initialize your system (run Program 20):
1. Install a display keyset at extension 300 (port 00).
2. Enter the programming mode.
·Without lifting the handset, dial #775312#.
3. Press...

Start-up Programming
Using the following table, you can quickly:
·Customize the programmable keys for each extension user
·Change the way calls ring system telephones
·Set up Voice Mail (if installed)
·Program Speed Dial numbers for extension users
When you first initialize, your system starts up with all keysets, Electronic Single Line
telephones and DSS Consoles functioning. Each extension user can place and answer
calls on all installed lines. In addition, outside calls flash the line keys and ring...

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
How To Use This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
How to Use Part I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
How to Use Part II (Customizing the System) . . . . . . . . . . . . . . . .  3
General Programming Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Call Forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Call Forwarding, Off-Premise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Call Forwarding System Cancel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47
Call Intercept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Call Timer . . . . . . . . . . . . . . . . . . . . . . . ....