Nitsuko Digital System Administrators Guide

Alpha numeric Displa y
&
See which extension is calling you, which call you are picking up,
etc. 
If you have a Display Phone, you see feature status messages on your display when
you use your phone.  For example, you see any number you dial, the extension that is
calling you, the name of the line you are answering (if names are programmed), a
recalling Transfer (when the destination extension does not answer it), etc.  When
your phone is idle, the display shows you the time and date.  In addition, you...

This display . . .Appears when you . . .
DELAYED RING Dial # DRA to program Delayed Ringing
Assignment
DIAL PREVIEW Dial * to activate Dialing Number Preview
Digits Dial a call
DND OFF Disable Do Not Disturb
DND ON Enable Do Not Disturb
DO NOT DISTURB Call an extension in Do Not Disturb
DSS ASSIGNMENT Dial # DSS to program Direct Station Selection
DSS LAMP FIELD Press ICM
DSS, EXT, 6,9,8 ? Press ICM # (system shows you what you can do
next: press DSS key, dial extension or 6 for
Selectable Display...

This display . . .Appears when you . . .
LINE nn Answer an outside call on line nn
LINE nnn FAILED
 (Attendant extension only)Press MSG to view a MINOR ALARM and line
nnn has failed
MAJOR ALARM
(Attendant extension only)Receive major alarm from the system
MAJOR/MINOR ALRM
(Attendant extension only)Receive both major and minor alarms from the
system simultaneously
MIKE MUTED Press MIC/DND to turn off the phone’s mic
MINOR ALARM
(Attendant extension only)Receive minor alarm from the system
MINUTES = nn Set...

This display . . .Appears when you . . .
PERSONAL DIR. Dial P for Personal Directory Dialing
PICKUP FROM nnn Pick up a call ringing extension nnn
PRIME LINE Dial # PLA to program a Prime Line
PRIVACY Press line key to have Privacy
PRIVATE (Requires Caller ID) Outside caller has blocked
Caller ID
PRIVATE CALL Press a line key for a line that has Privacy enabled
PROGRAM Dial # to program a feature
R Assigned name Answer recalling line from extension with
assigned name
RELEASE PRIVACY Press a line key to...

Using the Feature
To control the brightness
(contrast) of the display:
1.Press VOL UP or VOL DN while your phone is idle
(Background Music not playing).
Understanding Related Programming
Program 14To assign extension names so they appear in displays (See
the extension name entry procedure on page 242)
Program 10To assign line names so they appear in displays (See the
line name entry procedure on page 230)
Alphanumeric Display
Part I:  DIGITAL SYSTEM Features 29 

A lte rna te A ttenda nt
&
Temporarily leave your attendant position without missing calls or
asking a co-worker to take your place. 
If you are an attendant, Alternate Attendant lets you send your incoming calls to
another extension.  When you activate Alternate Attendant, outside calls ring your
attendant extension and the alternate extension.  Intercom calls ring only the alternate
unless the alternate is busy; then they ring your attendant extension instead.
Initial Configuration 
Alternate Attendant...

Ana log Sta tion Inte rfac e a nd Dual OP X/ASI Module
Analog Station Interface
The Analog Station Interface (ASI)
module (P/N 89749) provides standard
2500 set DTMF service at an extension
port.  The 2500 set connects to the ASI
and the ASI connects to a extension port.
Each ASI module has an internal DTMF
receiver. For installation instructions, see
P/N N1850ASI03.
Dual OPX/ASI Module
The Dual OPX/ASI Module (P/N
88750) provides two 2500 type DTMF
ports from a single extension
connection. The Dual...

Using the Feature
The DIGITAL SYSTEM features available to the ASI and Dual OPX/ASI Module
are listed below with abbreviated operating instructions.  To find more information
on a feature, refer to the page number provided.
In the instructions that follow: 
·Lift = Lift handset. 
·Hookflash = hold down the hookswitch for about .5 seconds, then release it. 
Handling Calls: The Basics
Placing an Outside Call (see
page 134)Using Line Dial-Up:  Lift + line code
(801-816) + number
Using Direct Line (Trunk)...

Features (In Alphabetical Order)
Call Forwarding (see page
44 and page 46)To an extension:  Lift + # + extension +
forwarding code + hang up
Code 1:  Forwards unanswered calls
Code 2:  Forwards unanswered and busy calls
Code 3:  Forwards all calls
To an outside number:  Lift + # + 1 + line
(01-16) that calls will forward on + number to
receive calls + hang up
To cancel forwarding:  Lift + # + hang up
Callback (see page 50)To leave callback at busy tone:  2 + hang up
To answer ring:  Lift (you get...

Features (In Alphabetical Order)
Line Queuing (see page 108)At busy tone:  2 + hang up
To answer ring:  Lift (you have outside dial
tone and can dial number)
To cancel one:  Try to access busy line again +
* + hang up
To cancel all:  Lift + # * + hang up
Meet-Me Conference (see
page 111)To set up Meet-Me:  Page parties + announce
Meet-Me code (11 or 12) + hookflash + 11 or
12 + do not hang up
To join Meet-Me:  Lift + 11 or 12
Night Answer (see page 121)To answer ring over page:  Lift + * 0
Off-Hook...