Nitsuko Ds2000 Multibutton Telephone Feature Handbook

							Your and keys
adjust the volume of the following
features while they are active.
Note that the categories grouped together are the same control. For
example, adjusting Intercom ringing also adjusts trunk ringing.

Incoming Intercom and outside call ringing. 1, 2

Background Music, Paging, Handsfree speaker, and incoming
voice announcements broadcast through your telephone
speaker. 
1

Handset/headset receiver volume. 1

Off Hook Ringing. 1, 2

Incoming Voice Over announcement.
1These features retain the volume levels you set.2These features retain the user-set volume levels after a sys-
tem reset or power down.
To  adjust the volume of a feature while it is active:
Pressing and while your tele-
phone is idle adjusts the display contrast.
1. Press and .
105
Volume Controls
Easily adjust the volume
of ringing, Paging and
other features. 
						

							The User Programmable Features
allow you to customize your tele-
phone to work just the way you
want. You’ll no longer have to
rely on you System Administrator
or Communications Manager to set up your phone.
Using the chart on the next page, the User Programmable
Features let you customize the following features:

Direct Station Selection(DSS) Assignment1

Headset Mode1

Hotline Key Assignment1

Off Hook Signaling(Setup)1

Paging(Incoming)1

Prime Line Assignment1

Programmable Function Key Assignment1

Programmable Function Key Ringing(for Call Coverage
Keys, Group Call Pickup Keys, and Line Keys)

Ringing Line Preference1

Speed Dial Bin Setup(Personal and System)
Note that in u slot systems, the ##2 and ##7 Speed Dial proce-
dures are no longer available.

Time and Date1

Voice Announce(for incoming Intercom calls)

Voice Over1
1 Feature is only available in universal slot systems.
106
Set up a multiple-party
telephone meeting
without leaving the office.
The User Programmable Features
Set up your telephone to
meet your own unique
requirements. 
						

							107
The User Programmable Features
User Programmable Features
To program a feature, press # and the feature’s code. For example, to enable incoming Paging, press # and dial V P Y, 
then SPK to hang up. The underlined codes (e.g., #RC) are for systems prior to 02.00.00.
Feature Mnemonic Operation
DSS#BLF
#BLF + Press DSS key + HOLD + Enter extension + VOL Up + Pro-
gram another key or SPK to exit.
Headset#HS
#HS + Y to enable or N to disable + SPK to exit
Hotline#HL
#HL + Press flashing Hotline key + Enter extension for new Hotline 
partner + Program another Hotline key or SPK to exit.
Off Hook Signaling#OHS
#OHS + Select mode (C=Outside line, D=DSS, I=ICM) + Select 
option (see below) + SPK to exit.Outside line options: C=Camp On tone, O=Off Hook Ringing, 0 = NoneIntercom options: C=Camp On, O=Off Hook Ringing, V=Voice 
Over, 0 = None
DSS Options: C=Camp On, O=Off Hook Ringing, 0 = None
Paging (Incoming)#VP
#VP + Y to enable or N to disable + SPK to exit.
Prime Line Assignment#PLA
#PLA + Press one of your flashing programmable keys or ICM + SPK to exit.
Programmable Function 
Key Assignments#KP
#KP + Press key you want to program + HOLD + ICM + Press VOL 
Up or VOL Down to select key option + HOLD + enter any addi-
tional data (if required) +  Press VOL Up or VOL Down to select 
another key to program, or SPK to exit.
Programmable Function 
Key Ringing#RAC
#RCCall Coverage Keys: #RAC + Call Coverage Key repeatedly to select 
ringing mode + SPK to exit.
Call Coverage Keys flash as follows: Lamp only=On red, Immediate 
ring=On green, Delay ring=Fast flash green.
#RAL
#RLOutside Line Keys: #RAL + Line Key repeatedly to select ringing 
mode + SPK to exit.
Line keys flash as follows: Lamp only=On red, Immediate ring=On 
green, Delay ring=Fast flash green, Night ring=Slow flash green.
#RAP
#RGGroup Call Pickup Keys: #RAP + Group Call Pickup Key repeatedly 
to select ringing mode  + SPK to exit.
Group Call Pickup Keys flash as follows: Lamp only=On red, Imme-
diate ring=On green, Delay ring=Fast flash green.
Ringing Line Preference
#RLP
#RLP + Y to enable or N to disable + SPK to exit.
Speed Dial, Personal#SP
#SP + Press bin key (for bins 701-710) or DIAL then bin key (for 
bins 711-720) + HOLD + Enter outside line (e.g., 1), line group (e.g., 
90), or ICM for Intercom feature + HOLD + Number to store + HOLD + Name + HOLD + Press another bin key or SPK to exit.
Speed Dial, System#SP
#SP + Dial System Speed Dial bin number (e.g., 200) + HOLD + 
Enter outside line (e.g., 1), line group (e.g., 90), or ICM for Intercom 
feature + HOLD + Number to store + HOLD + Name + HOLD + 
Press another bin key or SPK to exit.
Time and Date#TD
#TD + Enter time in 24-hour clock using hours (2 digits), minutes (2 
digits) and seconds (2 digits) + HOLD + Enter date using month (2 
digits), day (2 digits) and year (4 digits) + HOLD + SPK to exit.
Voice Announce (for your 
incoming Intercom calls)#VA
#IV, #IR#VA + V for voice announce or R for ring + SPK to exit. 
						

							108 
						

							109
Your Super Display Telephone
123
456
789
0
ABC DEF
MW ICM
FLASH DND
DIAL MIC
LND SPKR
CONF
HOLD GHI JKL MNO
PQRS TUV
OPER
VOLWXYZ
80000 - 65CHECKCLEAR
LINE 1      LINE 2      LINE 3       LINE 4      LINE 5      LINE 6
LINE 7      LINE 8
These keys are
undefined
LINE 9 LINE 10 LINE 11 LINE 12For Attendants:
Key 11=Night Key
Key 24=Operator Call Key

Your key assignments may be different than
shown. Ask your communications manager.

See the inside front cover of this guide for an
illustration of the 34-Button Display telephone. 
						

							4 Forest Parkway
Shelton, CT 06484
TEL: 203-926-5400  FAX: 203-929-0535165 Matheson Blvd E., Unit #4-6
Mississauga, Ontario L4Z 3K2
TEL: 905-507-2888  FAX: 905-507-2971
Printed in U.S.A. (2106)