OKI C3600n User Manual

Introduction > 11
CHANGING THE DISPLAY LANGUAGE
The default language used by your printer for display messages and for report 
printing is English. If required, this can be changed to:
German Danish
French Dutch
Italian Turkish
Spanish Portuguese
Swedish Polish
Russian Greek
Finnish Czech
Hungarian Norwegian
NOTE:
>The list above is neither conclusive nor exhaustive.
>See the information enclosed with the product (Operator Panel Language Set-up 
utility) on the procedure for changing the language...

Paper recommendations > 12
PAPER RECOMMENDATIONS
Your printer will handle a variety of print media, including a range of paper weights and 
sizes and envelopes. This section provides general advice on choice of media, and explains 
how to use each type.
The best performance will be obtained when using standard 75~90g/m² paper designed 
for use in copiers and laser printers. Suitable types are:
>Arjo Wiggins Conqueror Colour Solutions 90g/m²;
>Colour Copy by Neusiedler.
Use of heavily embossed or very...

Paper recommendations > 13
MULTI PURPOSE TRAY
The multi purpose tray can handle the same sizes as the cassette tray, but in weights from 
75 to 203g/m². For very heavy paper stock use the face up (rear) paper stacker. This 
ensures that the paper path through the printer is almost straight.
The multi purpose tray can feed paper widths as small as 100mm and lengths up to 
1220mm (banner printing).
For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and 
128g/m² and the face up...

Loading paper > 14
LOADING PAPER
CASSETTE TRAY
1.Remove the paper tray from the printer.
2.
Fan the paper to be loaded at the edges (1) and in the middle (2) to ensure that all 
sheets are properly separated, then tap the edges of the stack on a flat surface to 
make it flush again (3).
Load letter headed paper face down and top edge towards the front of the printer.
3.Adjust the rear stopper (1) and paper guides (2) to the size of paper being used. 
Use the level markings (3) on the paper guides as a...

Loading paper > 15
To prevent paper jams:
>Do not leave space between the paper and the guides and rear stopper.
>Do not overfill the paper tray. Capacity depends on the type of paper stock.
>Do not load damaged paper.
>Do not load paper of different sizes or types at the same time.
>Do not pull the paper tray out during printing.
4.Close the paper tray gently.
5.For face down printing, make sure the face up (rear) stacker (4) is closed (the paper 
exits from the top of the printer). Stacking capacity is...

Loading paper > 16
MULTI PURPOSE TRAY
1.Open the multi purpose tray (1).
2.Adjust the paper guides (2) to the size of paper being used.
>For single-sided printing on headed paper load the paper into the multi purpose 
tray with pre-printed side up and top edge into the printer.
>Envelopes should be loaded face up with top edge to the left and short edge into 
the printer. 
>Manually feed one sheet or envelope at a time.
3.Set the correct paper size for the multi purpose tray via the printer’s operator...

Operation > 17
OPERATION
USING THE MACHINE
>For full details of how to use the machine and any optional accessories to print jobs 
efficiently and effectively, please refer to the Printing Guide.
>For full details of how to connect and use the network feature, please refer to the 
Network Guide.
Downloaded From ManualsPrinter.com Manuals 

Menu functions > 18
MENU FUNCTIONS
This section lists the menus accessed via the controls on the printer’s operator panel and 
displayed in the LCD window.
OPERATOR PANEL:
1. ATTENTION 
LEDON: Attention state (e.g tray 
open/paper out)
BLINKING: Warning state (e.g. 
cover open).
OFF: Normal condition.5. MENU 
Buttons
(Up/
Down)Enters the Menu mode. In Menu 
mode, forwards or reverses the 
menu item displayed. Press for 2 
secs. or longer to fast forward or 
reverse.
2. ONLINE LED ON: Ready to receive...

Menu functions > 19
HOW TO CHANGE THE SETTINGS - USER
I t  s h o u l d  b e  n o t e d  t h a t  m a n y  o f  t h e s e  s e t t i ngs can be, and often are, overridden by settings 
in the Windows printer drivers. However, several of the driver settings can be left at 
“Printer Setting”, which will then default to the settings entered in these printer menus.
Where applicable, factory default settings are shown in bold type in the following tables.
In the normal operating condition, known as “printer...

Menu functions > 20
HOW TO CHANGE THE SETTINGS - ADMINISTRATOR
You can set whether to ENABLE or DISABLE each category in the user menu.
Disabled categories are not displayed in the User’s menu. Only a system administrator can 
change these settings.
1.Tu r n  OFF the printer.
2.Tu r n  ON the printer while pressing the ENTER button.
When ADMIN MENU appears, take your finger off the button.
3.Press the ENTER button.
4.When ENTER PASSWORD appears, press the MENU Up or MENU Down button 
several times to...