Panasonic 26"32" Diagonal Lcd Tv Tc 26lx70 Operating Instructions

							11
Quick Start 
Guide
 Basic  Connection
(TV + DVD Recorder or VCR)
High-Definition
Standard-Definition
12AV I N
L
R
Y
P
B
PR
L
R
L
R
■To use HDMI terminals
■To use COMPONENT terminals
• Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)
•Some programs contain a copyright protection signal to prevent recording.
• When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video 
signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the 
other TV monitor.
NoteDVD Recorder
DVD Recorder
HDMI
AV OUT
COMPONENT
VIDEO OUT
AUDIO
OUTwhite
red
green
blue
redwhite
red
green
blue
white
redwhite
redAUDIO
OUT S VIDEO
OUT red
■ To use COMPOSITE terminals
■To use S VIDEO terminals
VCR
COMPOSITE
OUT
yellow
white
redyellow
white
red
VCR
• The S Video input will override the composite 
video signal when S Video cable is connected. 
Connect either S Video or Video cable.• Connecting to S VIDEO terminals will enable 
you to enjoy greater picture quality than using 
Composite terminals.
white
red
green
blue
red
white
red yellow
white
red
• Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality 
sound.
or DVD Recorder
or DVD Recorder
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC








 
						

							12
To connect antenna terminals
Connecting TV and DVD recorder (VCR)
12ANTAV I N
ANT INANT OUTANT IN
Connect in the same way as on p. 11.
Basic Connection (Continued)
DVD Recorderor VCRSatellite 
Receiver TV
Satellite Receiver DVD Recorder or VCR
(with TV tuner)
VHF/UHF Antenna
VHF/UHF Antenna
To use HDMI 
terminals
(p. 11)
To use COMPONENT terminals
(p. 11)To use COMPOSITE terminals
(p. 11)To use S VIDEO terminals
(p. 11)
Back of the TVPower Cord
AC 120 - 127 V
60Hz
Antenna 
terminal
Example 3Connecting DVD recorder (VCR) and satellite receiver
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC








 
						

							13
Quick Start 
Guide
 Basic  Connection
(TV + DVD Recorder or VCR + Satellite receiver)
To connect DVD recorder
and satellite receiver
To connect VCR and
satellite receiver
L
R
L
R
Y
PB
L
R
P
R
L
R
Y
P
B
PR
L
R
L
R
white
redwhite
red
green
blue
redgreen
blue
red
■To use HDMI terminals
■To use COMPONENT terminals
• Satellite Receiver may also be connected to COMPOSITE or S VIDEO terminals. (see below)Satellite 
Receiver
Satellite 
Receiver
HDMI
AV OUT
white
red
white
redAUDIO
OUT S VIDEO
OUT
DVD Recorder
DVD Recorder
■To use COMPOSITE terminals
■To use S VIDEO terminals
Satellite 
ReceiverCOMPOSITE
OUTVCR
VCRyellow
white
redyellow
white
red
Satellite 
Receiver
AUDIO
OUT
white
red
yellow
white
red
white
red
green
blue
red
white
red yellow
white
red white
red
green
blue
red
COMPONENT
VIDEO OUT
AUDIO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
AUDIO
IN HDMI
AV  I N
COMPOSITEIN
• Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality 
sound.
• Connecting to S VIDEO terminals will enable 
you to enjoy greater picture quality than using 
Composite terminals.• The S Video input will override the composite 
video signal when S Video cable is connected. 
Connect either S Video or Video cable.
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC








 
						

							14
To connect HDMI terminals
12
AV I N
Basic Connection (Continued)
Home Theater
DVD recorder TV
DIGITAL
AUDIO IN
DVD RecorderHome Theater
(AV amp) Back of the TV
HDMI
AV OUT
HDMI
AV IN
HDMI
AV OUT
• It is recommended that you use 
Panasonic’s HDMI cable. (P.26)
• When Using the COMPONENT 
VIDEO OUT terminals or the 
S VIDEO OUT terminal,  refer to p.13 
“To use COMPONENT terminals” or 
“To use S VIDEO terminals”.
• If you connect RAM theater or Player 
theater with HDMI cable, use audio 
cable instead of the optical digital 
audio cable. (see p.37)
Note
or
Home theater(HDMI AV  OUT)Home theater(DIGITAL AUDIO  IN)
When listening to 
TV audio
[ATSC only]
Example 4  Connecting Home Theater and DVD recorder
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC








 
						

							15
Quick Start 
Guide
 Identifying  Controls Basic  Connection
DEMO
SUBSUBMENUMENU
-
Identifying Controls
Remote control sensor 
Within about 23 feet (7 meters) in front of the TV set.
Power indicator 
(on:  red, off:  no light)
• The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.
NoteVolume up/down
Menu navigations
Switches TV to On or Standby
The equipment selection button (p. 20)
Changes the input mode (p. 20)
Displays Sub Menu (p. 18, 24)
Colored buttons 
(used for various functions)
(for example p. 30)
Channel up/down
Changes aspect ratio (p. 19)
Operates the Favorite channel list 
function. (p. 19)
Switches to previously viewed channel 
and input modes.EZ Sync menu (p. 21, 26-27)
Selects Audio Mode for TV viewing 
(p. 18)
Displays Main Menu (p. 22)
Exits menus
Selects/OK/Change
Returns to previous menu
Volume up/down
Displays or removes the channel 
banner (p. 18)
Sound mute On/Off
Numeric keypad to select any 
channel (p. 18) or press to enter 
alphanumeric input in menus.
(p. 21, 28, 30, 35)
Direct channel access for DTV and 
DBS (p. 18)
External equipment operations
(VCRs, DVDs, etc.) (p. 20)POWER button
Switches TV/VIDEOSelects channels 
in sequence
Demonstrates picture quality in vivid mode.
(Press any key to cancel the demo.)
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC








 
						

							16
Language
EnglishLanguage
Clock
2007Ye a r
Month
7
1
Day
Hour
10
10 AM
Minute
First time setup
Picture
Language
Clock
Auto program
First time setup
Picture
Language
Clock
Auto program
First Time Setup
“First time setup” is displayed only when the TV is turned on for the first time after the power cord is 
inserted into a wall outlet and when “Auto power on” (p. 24-25) is set to “No”.
Turn the TV On with the POWER button
1
Select your language
2
Adjust the clock
3
Year:  Select the year
Month:  Select the month 
Day:  Select the day
Hour:  Adjust the hour 
Minute:  Adjust the minuteGo back to previous screen.
■ Press to exit from 
menu screen
■ Press to return to 
previous screen 
Note
• To change setting 
(Language/Clock/Auto 
program/Picture) later, 
go to Menu screen 
(p. 22,24)
English  Español   Français
next
select
 set
 select  item
Go back to previous screen.or
 next
 select
(TV) (Remote) or
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC








 
						

							17
Quick Start 
Guide
 First Time  Setup
Program channel
CableANT in
Auto
Auto program
progress Scanning digital channel
quit40%
Caption Favorite Add
ApplyCancelprogram
... .
Ye s
... .
Ye s
... .
Ye s
First time setup
Picture
Language
Clock
Auto program
Program channel
CableANT in
Auto
Auto program
All channels
Analog only
Digital only
First time setup
Picture
Language
Clock
Auto program
 next
 select 
 select 
“Apply”
 ok
 next
 select
 set
 select
ANT in
Cable:  Cable TV
Antenna:  Antenna
Auto channel setup
4
 Select  “Auto”
 Select “Auto program”
 Select “ANT in”
5 Confirm registered channels
• Available channels (analog/digital)
are automatically set.
• If OK is not pressed after selecting “Apply”, the channels will not be saved.
• If you perform scanning more than twice, previously saved channels are erased.
Note
• About broadcasting 
systems
 Analog

(NTSC):  
traditional TV 
programming
 Digital 
(ATSC): 
new programming 
that allows you to 
view more channels 
featuring high-quality 
video and sound
■ Press to exit from 
menu screen
 ok
 select
All channels:  Scans digital and analog channels
Analog only:   Scans Analog channels only
Digital only:   Scans Digital channels only
Start scanning the channels
 Select scanning mode (ALL channels/Analog only/Digital only)
(Refer to p. 22)
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC








 
						

							18
-
15-2 12:30 pm
30THE NEWS 
CC SAP
TV-G 1 0 8 0 i Standard 4:3ABC-HD
Setup SUB MENU
AllSurf mode
Set favorite
OffCC
Caption select
Signal meter
SUBSUBMENUMENU
Watching TV
Connect the TV to a cable box/cable, set-top-box, satellite box, or antenna cable (p. 8-9)
12
Turn power on Select a channel number
up
down
or
■ To directly input the digital channel 
number
example:  CH15-1:    - 
■ Other Useful Functions (Operate after )
Display the 
SUB MENU Listen
with SAP
(Secondary 
Audio 
Program)
■ Selects Audio Mode for watching TV
• Digital mode
  Press SAP to select the next audio track (if available) when receiving a digital channel.
Audio track 1 of 2 
(English) 
• Analog mode
  Press SAP to select the desired audio mode.
• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)
■ Press SUB MENU to show sub menu screen. (p.24)
This menu consists of shortcuts to convenient functions.
-When tuning to a digital 
channel, press the button to 
enter the minor number in a 
compound channel number. Note• If the mode is not TV, press 
 and select TV. (p 20)
Information
Recall
■ Displays or removes the channel banner.
Channel
Station 
identifierSAP
indicationSignal
resolution
Rating LevelPicture
modeSleep timer
remaining time
Aspect ratio Closed captionClock
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC








 
						

							19
Viewing
 Watching TV
Favorite channels1/3
1
2
3
4
26-1      - - -
Set favorite 1/3
1
2
3
---
---
---
---
4
Set favorite 1/3
1
2
3
4
26-1      - - -
Setup SUB MENU
AllSurf mode
Set favorite
OffCC
Caption select
Signal meter
 select 
 ok
• To change the page
 Pressing ◄ changes the page backward.    Pressing ► changes the page forward.
SUBSUBMENUMENUSetup SUB MENU
AllSurf mode
Set favorite
OffCC
Caption select
Signal meter
Change
aspect
ratio
Call up
a favorite
channel
■ Press ASPECT to cycle through the aspect modes. (p. 43)
•  480i, 480p:  FULL/JUST/4:3/ZOOM
•  1080p, 1080i, 720p:  FULL/H-FILL/JUST/4:3/ZOOM
■ FAVORITE
  Channel numbers registered in Favorite are displayed on the favorite tune 
screen. Select the desired broadcast station with the cursor or use number 
buttons. (see below)
Note
• Reselect “Cable” or “Antenna” in “ANT in” of “Program channel” to switch the signal reception between cable TV 
and antenna. (p. 17, 31)
• The channel number and volume level remain the same even after the TV is turned off. 
1 Press FAVORITE.
 •  Press FAVORITE repeatedly 
to change between pages (1/3, 
2/3, 3/3, or exit). 
2 Press ▲▼ or a Numbered key 
(1-9 and 0) to highlight a channel 
on the list.
•  Selecting a channel number 
from the list with the number 
button will display the channel 
directly.
3  Press OK to display the 
highlighted channel.
Set Favorite FeatureUse Favorite Feature
select 
ok 
1 Display the SUB MENU.
2 
 
 •  Press FAVORITE repeatedly 
to change between pages (1/3, 
2/3, 3/3, or exit). 
3 Press ▲▼to highlight a position 
on the list. 
Then, press OK to save the 
displayed channel in that position.
 •  You can also use the NUMBER 
buttons (1-9 and 0) to select a 
list number (1-9 and 0). By doing 
so, the displayed channel will 
be saved on that list number 
without pressing OK.
• To delete a favorite channel  A saved channel can be removed from the list by holding 
down OK while its position is highlighted.
 select   “Set favorite ”
 ok
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC








 
						

							20
VCR MODE DVD MODE
VCR Record Record
-Skip Reverse/Forward
Rewind/Fast Forward Reverse/Forward
Stop Stop
Pause Pause
Play Play
Input select
1
2
3
4
5
6
7TV
Component
HDMI 1
HDMI 2
Video 1
Video 2
Video 3 
Video 1
VCR
With the connected equipment turned On
Display the Input select menu
Press corresponding NUMBER 
button on the remote control to 
select the input of your choice.
Select the input of your choice, 
then press OK.
• During the selection, if no action 
is taken for several seconds, the 
“Input select” menu disappears.
• The terminal and label of 
the connected equipment is 
indicated.
  To label each of the input please 
refer to P. 32-34
(example)
or
Operate the connected equipment, pointing remote control 
at the equipment.
• For details, see the
manual of the 
equipment,
Select the input mode
(example)
(For other operations, see p. 38)
Label
(example)Terminal
Note
4
1
2
 select
 enter
Watching Videos and DVDs
If you have some equipment connected to the TV, you can easily watch videos and DVDs using the TV’s 
remote control.
Input Select
You can select the external equipment to access. 
To operate other manufacturers’ equipment, you need to register the code of the equipment. (p. 35)
3
Select the remote control mode
Press the key to select
■ Press to return to TV             
5$@@@MY@FOH@JOEC


5$@@@MY@FOH@JOEC