Panasonic 3d Conversion Lens Vw-clt2 Owners Manual

Owner’s Manual
Instrucciones de funcionamiento
3D Conversion Lens
Model No.
 VW-CLT2
Before connecting, operating or adjusting this product, please read the instructions completely.
Antes del uso, lea completamente estas instrucciones.
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, 
contact us via the web at: http://www.panasonic.com/contactinfoFor Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
VQT4A75
until 
2012/1/30
PVQT4A75_P_eng__lsp.book...

2VQT4A75(ENG)Before use ................................................................ 2To Avoid Malfunctions ......................................... 3
Cautions for use....................................................... 4
Accessories.............................................................. 7
Names and Functions of Main Parts ...................... 8Attaching/Detaching the Lens to/from the video 
camera ....................................................................... 10Adjust the...

3
(ENG)VQT4A75
∫About the Handling of the 3D Conversion 
Lens≥Sand or dust will cause malfunctions in the 3D 
Conversion Lens. Be careful not to allow sand or 
dust to get inside the 3D Conversion Lens when 
using at the beach or similar. 
≥ The 3D Conversion Lens is not waterproof. Wipe 
with a dry cloth if any water gets on it. 
Contact the retailer or the service center when it 
does not operate properly. 
≥ Image may be affected when the surface of the 
protective panel is contaminated by water, oil,...

4VQT4A75(ENG)Do not drop or strike the 3D Conversion Lens when 
carrying it.
Also, be careful not to apply strong force to the 3D 
Conversion Lens.
≥Be careful that no shock is applied to the 3D 
Conversion Lens by dropping or striking the bag with 
the 3D Conversion Lens stored within. It may cause a 
malfunction or stop images from being recorded. It 
may also damage the 3D Conversion Lens.
≥ Do not carry the video camera with the 3D 
Conversion Lens attached by holding onto the 3D 
Conversion Lens...

5
(ENG)VQT4A75
Do not allow any insecticide or volatile substance to 
get on the 3D Conversion Lens if they are used in 
the surrounding area.
≥Failure to observe this may result in deformation or 
the coating peeling off.
Do not use solvents such as benzine, thinner, 
alcohol, etc., for cleaning.
≥ Solvents may cause discoloration or damage.
≥ Do not touch or contaminate the surface of the 
protective panel. Blow any dust off using a 
commercially available blower brush and wipe gently 
with a dry soft...

6VQT4A75(ENG)∫About 3D viewingAnyone who is hyper sensitive to light, suffers from 
heart disease or is otherwise unwell should avoid 
viewing 3D video.
≥Doing so may have an adverse affect on such 
medical conditions.
If you feel tired, uncomfortable or otherwise strange 
when viewing 3D video, stop viewing at once.
≥ Continuing to view may cause illness.
≥ Please rest appropriately after stopping the viewing.
When viewing 3D video, we recommend taking a 
break every 30 to 60 minutes.
≥ Viewing for...

7
(ENG)VQT4A75
Check the accessories before using the lens.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Dec. 2011. These may be subject to change.
*1 This is attached to the 3D Conversion Lens at the time of purchase.
*2 This is attached to the step up ring at the time of purchase.AccessoriesVFC4768Lens storage bag
VYK5F47 Lens front cap
*1
VGQ0X77Lens rear cap
*1 (for the 3D Conversion Lens)
VYK5J94 Step up ring
Lens rear cap*2 (for the step up...

8VQT4A75(ENG)
1 Protective panel (front)
2Lens
3 Adjustment dial cover
4 Protective panel (rear)
5 Camera body attachment part (convex)
Names and Functions of Main Parts
5
4
2 1
3
VQT4A75_P_eng__lsp.book  8 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 

9
(ENG)VQT4A75
6 Vertical position adjustment dial [ ]
7 Horizontal image position adjustment dial [ ]
8 Attachment lever (upper)
9 Lock button
10 Attachment lever (lower)Lens front cap11 Horizontal line for adjustment
≥Use to adjust the lens attachment position. ( l15)Step up ring12 Attachment screw
6
7
9 8
10
1112
VQT4A75_P_eng__lsp.book  9 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 

10VQT4A75(ENG)≥To attach the 3D Conversion Lens to the video camera with a filter diameter of 46 mm, a supplied step up ring is 
required.1
Rotate the lens rear cap (for the 3D Conversion 
Lens) in the direction indicated by the arrow.(Only for the video camera with a filter diameter of 46 mm)After removing the lens rear cap from the step 
up ring, slide the 3D Conversion Lens 
attachment lever to LOCK while pressing down 
the Lock button on the lever, and attach the step 
up ring.
≥Slide the upper and...