Panasonic 3d Conversion Lens Vw-clt2 Owners Manual

							Owner’s Manual
Instrucciones de funcionamiento
3D Conversion Lens
Model No.
 VW-CLT2
Before connecting, operating or adjusting this product, please read the instructions completely.
Antes del uso, lea completamente estas instrucciones.
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, 
contact us via the web at: http://www.panasonic.com/contactinfoFor Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
VQT4A75
until 
2012/1/30
PVQT4A75_P_eng__lsp.book  1 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 
						

							2VQT4A75(ENG)Before use ................................................................ 2To Avoid Malfunctions ......................................... 3
Cautions for use....................................................... 4
Accessories.............................................................. 7
Names and Functions of Main Parts ...................... 8Attaching/Detaching the Lens to/from the video 
camera ....................................................................... 10Adjust the attachment position and record ........ 15
Specifications......................................................... 20
Limited Warranty 
(ONLY FOR U.S.A. AND PUERTO RICO) .............. 22
Warranty (For Canadian Customers) ................... 26
Useful Information (Only For Latin American 
Countries) ............................................................... 28 ≥
This 3D Conversion Lens can record realistic and 
powerful 3D videos by mounting it on a Panasonic 
High Definition Video Camera compatible with 3D 
Conversion Lens for filter diameter 49 mm.
≥ By attaching the supplied step up ring, this can be 
used on 3D compatible video cameras with a filter 
diameter of 46 mm. To check whether the 3D 
Conversion Lens can be attached to your video 
camera, see the owner’s manual for your video 
camera.
≥ 3D full high definition image can not be recorded by 
all video cameras.
≥ To view 3D video, a television that supports 3D is 
required.Contents
Before use≥Panasonic will not be liabl e for any damages 
sustained directly or indirectly from the use or failure 
of this product.
≥ Panasonic will also not be liable for any losses of 
data caused by this product.
VQT4A75_P_eng__lsp.book  2 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 
						

							3
(ENG)VQT4A75
∫About the Handling of the 3D Conversion 
Lens≥Sand or dust will cause malfunctions in the 3D 
Conversion Lens. Be careful not to allow sand or 
dust to get inside the 3D Conversion Lens when 
using at the beach or similar. 
≥ The 3D Conversion Lens is not waterproof. Wipe 
with a dry cloth if any water gets on it. 
Contact the retailer or the service center when it 
does not operate properly. 
≥ Image may be affected when the surface of the 
protective panel is contaminated by water, oil, 
fingerprints, etc. Wipe the surface of the protective 
panel gently with a dry soft cloth before and after the 
recording.
≥ Remove the 3D Conversion Lens from the video 
camera and place it in the lens storage bag when 
carrying.
∫ About Condensation (When the 3D 
Conversion Lens is Fogged Up)≥Condensation occurs when there is a difference in the 
temperature or humidity as in the following cases. Be 
careful since it may cause contamination, mold, or 
malfunction of the 3D Conversion Lens. 
jWhen it is carried indoors from a cold outdoor 
environment
j When carried out from a cool, air-conditioned car, 
etc.
j When cool wind from an air conditioner is directly 
blown onto the lens
j In an area with high humidity 
≥ To prevent condensation, place in a plastic bag and 
allow it to warm up to the ambient temperature. If any 
condensation occurs, leave it as it is for 
approximately 1 hour. Condensation will disappear on 
its own once it is warmed up to the ambient 
temperature.
To Avoid Malfunctions
English
VQT4A75_P_eng__lsp.book  3 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 
						

							4VQT4A75(ENG)Do not drop or strike the 3D Conversion Lens when 
carrying it.
Also, be careful not to apply strong force to the 3D 
Conversion Lens.
≥Be careful that no shock is applied to the 3D 
Conversion Lens by dropping or striking the bag with 
the 3D Conversion Lens stored within. It may cause a 
malfunction or stop images from being recorded. It 
may also damage the 3D Conversion Lens.
≥ Do not carry the video camera with the 3D 
Conversion Lens attached by holding onto the 3D 
Conversion Lens only. Do not use or store the 3D Conversion Lens in the 
following places since it may cause a failure or 
malfunction.
jIn direct sunlight or at the beach in summer, etc.
j Areas with high temperature and/or humidity, or 
where there is rapid change in temperature and/or 
humidity
j Areas with a lot of sand and dust
j Areas close to fire
j Close to air-conditioners and/or humidifiers
j Areas where it may get wet
j Areas with vibration
j inside a car
≥ Do not disassemble or modify.
≥ When the 3D Conversion Lens has not been used for 
a long period of time, check to see if there is any 
looseness in the attachment of the 3D Conversion 
Lens and adjust the attachment position before use.
≥ When not in use, put the lens caps on, place it inside 
the lens storage bag, and store in a place with low 
humidity.
≥ Also read the owner’s manuals of the video camera.Cautions for useVQT4A75_P_eng__lsp.book  4 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 
						

							5
(ENG)VQT4A75
Do not allow any insecticide or volatile substance to 
get on the 3D Conversion Lens if they are used in 
the surrounding area.
≥Failure to observe this may result in deformation or 
the coating peeling off.
Do not use solvents such as benzine, thinner, 
alcohol, etc., for cleaning.
≥ Solvents may cause discoloration or damage.
≥ Do not touch or contaminate the surface of the 
protective panel. Blow any dust off using a 
commercially available blower brush and wipe gently 
with a dry soft cloth if contaminated.
≥ Do not use any kitchen detergent or chemical treated 
wipes.
∫ About 3D recordingAttach the 3D Conversion Lens securely. It must not 
be used with an insecure attachment.
Be sure to perform the convergence adjustments 
before use. Recording with a misaligned lens may 
lead to eye fatigue or discomfort. The lens should 
be aligned each time it is re-attached to the 
camcorder body.
With the 3D Conversion Lens attached, do not 
record a subject at less than the minimum focus 
distance. Only record subjects that are beyond 
1.2 m (3.9 feet).
≥The 3D effects may be more pronounced, and 
therefore cause tiredness or discomfort.
≥ The minimum focus distance is approx. 1.2 m 
(3.9 feet).
When recording with the 3D Conversion Lens 
attached, be careful not to shake the video camera.
≥ Tiredness or discomfort may result if the shake is 
pronounced, due to riding in a vehicle or walking etc.
≥ When moving the video camera as you record, move 
it slowly.
≥ We recommend using a tripod.
When requesting a repair for the 3D Conversion 
Lens, request a repair for the video camera as well, 
as the cause of the problem may be in the video 
camera.
VQT4A75_P_eng__lsp.book  5 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 
						

							6VQT4A75(ENG)∫About 3D viewingAnyone who is hyper sensitive to light, suffers from 
heart disease or is otherwise unwell should avoid 
viewing 3D video.
≥Doing so may have an adverse affect on such 
medical conditions.
If you feel tired, uncomfortable or otherwise strange 
when viewing 3D video, stop viewing at once.
≥ Continuing to view may cause illness.
≥ Please rest appropriately after stopping the viewing.
When viewing 3D video, we recommend taking a 
break every 30 to 60 minutes.
≥ Viewing for extended periods may cause eye-fatigue.
Short-sighted or far-sighted persons, those with 
differences in the sight of their right and left eyes, 
and those with astigmatism are advised to correct 
their vision by wearing glasses etc.
Stop viewing if you can clearly see a double image 
while viewing 3D video.
≥ There are differences in the way that different people 
experience 3D video images. Please correct your 
sight appropriately before viewing 3D video.
≥ You can change the 3D setting of your television or 
3D output setting of the video camera to 2D.VQT4A75_P_eng__lsp.book  6 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 
						

							7
(ENG)VQT4A75
Check the accessories before using the lens.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Dec. 2011. These may be subject to change.
*1 This is attached to the 3D Conversion Lens at the time of purchase.
*2 This is attached to the step up ring at the time of purchase.AccessoriesVFC4768Lens storage bag
VYK5F47 Lens front cap
*1
VGQ0X77Lens rear cap
*1 (for the 3D Conversion Lens)
VYK5J94 Step up ring
Lens rear cap*2 (for the step up ring)
(the product number of the lens rear cap: VGQ0M57)
VQT4A75_P_eng__lsp.book  7 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 
						

							8VQT4A75(ENG)
1 Protective panel (front)
2Lens
3 Adjustment dial cover
4 Protective panel (rear)
5 Camera body attachment part (convex)
Names and Functions of Main Parts
5
4
2 1
3
VQT4A75_P_eng__lsp.book  8 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 
						

							9
(ENG)VQT4A75
6 Vertical position adjustment dial [ ]
7 Horizontal image position adjustment dial [ ]
8 Attachment lever (upper)
9 Lock button
10 Attachment lever (lower)Lens front cap11 Horizontal line for adjustment
≥Use to adjust the lens attachment position. ( l15)Step up ring12 Attachment screw
6
7
9 8
10
1112
VQT4A75_P_eng__lsp.book  9 ページ  ２０１１年１２月１４日　水曜日　午後５時１分 
						

							10VQT4A75(ENG)≥To attach the 3D Conversion Lens to the video camera with a filter diameter of 46 mm, a supplied step up ring is 
required.1
Rotate the lens rear cap (for the 3D Conversion 
Lens) in the direction indicated by the arrow.(Only for the video camera with a filter diameter of 46 mm)After removing the lens rear cap from the step 
up ring, slide the 3D Conversion Lens 
attachment lever to LOCK while pressing down 
the Lock button on the lever, and attach the step 
up ring.
≥Slide the upper and lower attachment levers while pressing  
them down with your fingers.
≥ Attach the step up ring to the 3D Conversion Lens with the 
[3UP] mark side up.
≥ Attach the step up ring to the 3D Conversion Lens first, and then 
attach the step up ring part to the video camera.
≥ Video is not recorded properly when only the step up ring is 
attached to the video camera.Attaching/Detaching the Lens to/from the video 
camera


61
A the convex
B the concave
VQT4A75_P_eng__lsp.book  10 ページ  ２０１１年１２月１４日　水曜日　午後５時１分