Panasonic Bb Hcm311a Owners Manual
Have a look at the manual Panasonic Bb Hcm311a Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 43
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 43
Notifying Setup of an Alarm Log
Once a day, an alarm log sent at a specified time can be checked. To enable Alarm Log,
set Alarm 1, Alarm 2 or Motion Detection for Trigger Setting and check [Enable].
When Alarm Log is used, the DNS server address setting is required. (See 2.2
Connecting the Camera to Your IPv4 Network or 2.3 Connecting the Camera to Your
IPv6 Network on the Operating Instructions.)
1.Click...](http://img.usermanuals.tech/thumb/58/68109/w64_bb-hcm311_en_additional_d-42.png "Page 43
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 43
Notifying Setup of an Alarm Log
Once a day, an alarm log sent at a specified time can be checked. To enable Alarm Log,
set Alarm 1, Alarm 2 or Motion Detection for Trigger Setting and check [Enable].
When Alarm Log is used, the DNS server address setting is required. (See 2.2
Connecting the Camera to Your IPv4 Network or 2.3 Connecting the Camera to Your
IPv6 Network on the Operating Instructions.)
1.Click...")
![Page 44
Operating Instructions (Additional Features)
44
Alarm logs are deleted when resetting the camera to factory default.
Alarm logs are deleted when you save new settings.
SettingDescription
A setup of operation Alarm log operation can be set here.
Time Set the date and time to send alarm logs via E-mail.
SMTP Server IP
Address or Host
Name
*1
*1But [Space], [], [], [&], [] are not available.
If you set the server IP address, set 4 digits (0—255)
and 3 periods such as 192.168.0.253. But 0.0.0.0...](http://img.usermanuals.tech/thumb/58/68109/w64_bb-hcm311_en_additional_d-43.png "Page 44
Operating Instructions (Additional Features)
44
Alarm logs are deleted when resetting the camera to factory default.
Alarm logs are deleted when you save new settings.
SettingDescription
A setup of operation Alarm log operation can be set here.
Time Set the date and time to send alarm logs via E-mail.
SMTP Server IP
Address or Host
Name
*1
*1But [Space], [], [], [&], [] are not available.
If you set the server IP address, set 4 digits (0—255)
and 3 periods such as 192.168.0.253. But 0.0.0.0...")
![Page 45
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 45
Changing the Time Stamp Setting
The Time stamp setting is changed on the Image Display page.
SettingDescription
Time stamp setting You can display a time stamp on the upper left side of
the image. Select from [Enable] or [Disable].
Note
If you enable this feature, the time is also stamped
on the buffered image.
Set AM/PM format and 24H format on the Date
and Time page.](http://img.usermanuals.tech/thumb/58/68109/w64_bb-hcm311_en_additional_d-44.png "Page 45
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 45
Changing the Time Stamp Setting
The Time stamp setting is changed on the Image Display page.
SettingDescription
Time stamp setting You can display a time stamp on the upper left side of
the image. Select from [Enable] or [Disable].
Note
If you enable this feature, the time is also stamped
on the buffered image.
Set AM/PM format and 24H format on the Date
and Time page.")
![Page 46
Operating Instructions (Additional Features)
46
Format the SD memory card
Before you record the camera image, you need to format the SD memory card.
Note
You can confirm the SD memory capacity on the Status page.
1.Insert the SD memory card.
2.Click [Trigger] on the Setup page.
3.Click [Format].
4.Click [OK] on the confirmation window.
Format is complete.
5.Click [Go to Trigger page].
The Trigger page is displayed.](http://img.usermanuals.tech/thumb/58/68109/w64_bb-hcm311_en_additional_d-45.png "Page 46
Operating Instructions (Additional Features)
46
Format the SD memory card
Before you record the camera image, you need to format the SD memory card.
Note
You can confirm the SD memory capacity on the Status page.
1.Insert the SD memory card.
2.Click [Trigger] on the Setup page.
3.Click [Format].
4.Click [OK] on the confirmation window.
Format is complete.
5.Click [Go to Trigger page].
The Trigger page is displayed.")
![Page 47
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 47
Stop the SD Memory Recording
After you stop the SD memory recording, remove the SD memory card.
Note
You can confirm the SD memory capacity on the Status page.
If the camera is restarted, the SD memory recording starts again.
If you remove the SD memory card and insert it again, the SD memory
recording starts again.
1.Click [Trigger] on the Setup page.
2.Click [SD video recording stop].
3.Click [OK] on...](http://img.usermanuals.tech/thumb/58/68109/w64_bb-hcm311_en_additional_d-46.png "Page 47
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 47
Stop the SD Memory Recording
After you stop the SD memory recording, remove the SD memory card.
Note
You can confirm the SD memory capacity on the Status page.
If the camera is restarted, the SD memory recording starts again.
If you remove the SD memory card and insert it again, the SD memory
recording starts again.
1.Click [Trigger] on the Setup page.
2.Click [SD video recording stop].
3.Click [OK] on...")
![Page 48
Operating Instructions (Additional Features)
48
Start the SD Memory Recording
The SD memory recording can be started on the Trigger page.
Note
You can confirm the SD memory capacity on the Status page.
If the camera is restarted, the SD memory recording starts again.
If you remove the SD memory card and insert it again, the SD memory
recording starts again.
1.Click [Trigger] on the Setup page.
2.Click [SD video recording start].
3.SD video recording was started. is displayed.
The SD memory...](http://img.usermanuals.tech/thumb/58/68109/w64_bb-hcm311_en_additional_d-47.png "Page 48
Operating Instructions (Additional Features)
48
Start the SD Memory Recording
The SD memory recording can be started on the Trigger page.
Note
You can confirm the SD memory capacity on the Status page.
If the camera is restarted, the SD memory recording starts again.
If you remove the SD memory card and insert it again, the SD memory
recording starts again.
1.Click [Trigger] on the Setup page.
2.Click [SD video recording start].
3.SD video recording was started. is displayed.
The SD memory...")
![Page 49
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 49
Adding [Alarm Log] on the Maintenance Window
Session Status function is added
The client information connecting to camera is displayed.
Clicking [Session Status] in the Maintenance page displays as follows.
Displaying Alarm Logs
Displays up to 50 Alarm Logs in order of time. Old logs will be overwritten by new
one.
1.Click [Alarm Log] on Maintenance page.
2.Alarm Logs are displayed.
Maintenance
(1)Alarm...](http://img.usermanuals.tech/thumb/58/68109/w64_bb-hcm311_en_additional_d-48.png "Page 49
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 49
Adding [Alarm Log] on the Maintenance Window
Session Status function is added
The client information connecting to camera is displayed.
Clicking [Session Status] in the Maintenance page displays as follows.
Displaying Alarm Logs
Displays up to 50 Alarm Logs in order of time. Old logs will be overwritten by new
one.
1.Click [Alarm Log] on Maintenance page.
2.Alarm Logs are displayed.
Maintenance
(1)Alarm...")
![Page 51
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 51
Viewing Still Images on Your Cell Phone
You can view still images and registered preset positions over the Internet from a
compatible cell phone.
You can view registered preset positions to click
each link.
Displays up to 50 Logs in order of time, and only
when logging in as an administrator.
Go to the control page when clicking.
Displays the number of new logs.
Displays the date...](http://img.usermanuals.tech/thumb/58/68109/w64_bb-hcm311_en_additional_d-50.png "Page 51
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 51
Viewing Still Images on Your Cell Phone
You can view still images and registered preset positions over the Internet from a
compatible cell phone.
You can view registered preset positions to click
each link.
Displays up to 50 Logs in order of time, and only
when logging in as an administrator.
Go to the control page when clicking.
Displays the number of new logs.
Displays the date...")
Operating Instructions (Additional Features) [For assistance, please call: 1-800-272-7033] 51 Viewing Still Images on Your Cell Phone You can view still images and registered preset positions over the Internet from a compatible cell phone. You can view registered preset positions to click each link. Displays up to 50 Logs in order of time, and only when logging in as an administrator. Go to the control page when clicking. Displays the number of new logs. Displays the date and time, the kind of signal and sensor. Go to the control page when clicking. DisplayOperationSignal A1 R A2 F MD Alarm1 Alarm2 Motion Detection Rising: GND to Open (High). Falling: Open (High) to GND. -----
Panasonic Corporation of North America PSQX3812YA KK0505YT3040 Panasonic System Networks Co., Ltd. 2005 Carefully pack your unit, preferably in the original carton. Attach a letter, detailing the symptom, to the outside of the carton. Symptom The information in this document is subject to change without notice. Send the unit to an authorized servicenter, prepaid and adequately insured. Do not send your unit to the Panasonic Corporation of North America listed below or to executive or regional sales offices. These locations do not repair consumer products. When you ship the product Panasonic Servicenters are listed in the servicenter directory. Call 1-800-272-7033 for the location of an authorized servicenter. This Network Camera is designed for use in the United States of America. Sale or use of this product in other countries/areas may violate local laws. For product service Copyright:This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.