Panasonic DBS 576 Technical Manual

Section 700 - Operation Chapter 4. User Maintenance
576-50-700 DBS 576 (USA) issued September 2001 4-17
Table 4-3.   Mode Schedule Patterns - addresses & values  
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Set Personal Speed Dial Names
Description
For a description of Personal Speed Dial (PSD), see “Personal Speed Dial” on page 5-78 for a Digital 
Key Telephone, “Personal Speed Dial” on page 6-43 for a Digital Single Line Telephone (DSLT), and 
“Personal Speed Dial” on page...

4-18 DBS 576 (USA) issued September 2001 576-50-700
Chapter 4. User Maintenance Section 700 - Operation
Operation
To set PSD names using either a large-display or small-display phone:
Action Result
1.   If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on 
page 4-3.)  81-
  User MAINT displays
2.   At the 81 level, enter 01.  
3.   Press the HOLD key.  8101-
  PSD Assignment displays
4.   Enter 1.  
5.   Press the HOLD key.  1  : 
  PSD Name...

Section 700 - Operation Chapter 4. User Maintenance
576-50-700 DBS 576 (USA) issued September 2001 4-19
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Example 1. Large-Display Phone
To  e n t e r  D:
a.  Press the first soft key on the top left.
b.  Press the fourth FF key from the left on the bottom row.
To  e n t e r  o:
a.  Press the third soft key from the top right.
17.   Press the AUTO key to exit the PSD name entry mode.   Enter PSD # XXX displays (where 
XXX = extension...

4-20 DBS 576 (USA) issued September 2001 576-50-700
Chapter 4. User Maintenance Section 700 - Operation
b.  Press the third FF key from the left on the bottom row.
Example 2. Small-Display Phone
Refer to the following diagram to determine which one-touch key to press.
To  e n t e r  D:
a.  Press the first one-touch key from the left on the bottom row.
G H I J K L M N O P Q R S T U V W X A B C D E F Y Z . , ’ -
a b c d e fg h i j k lm n o p q rs t u v w xy z : & / sp 

Section 700 - Operation Chapter 4. User Maintenance
576-50-700 DBS 576 (USA) issued September 2001 4-21
b.  Press the fourth FF key from the left on the bottom row.
To  e n t e r  o:
a.  Press the third one-touch key from the left on the top row.
b.  Press the third FF key from the left on the bottom row.
END MODE
END MODE
PROG
CONF 

4-22 DBS 576 (USA) issued September 2001 576-50-700
Chapter 4. User Maintenance Section 700 - Operation
Set Personal Speed Dial Numbers
Description
For a description of Personal Speed Dial (PSD), see “Personal Speed Dial” on page 5-78 for a Digital 
Key Telephone, “Personal Speed Dial” on page 6-43 for a Digital Single Line Telephone (DSLT), and 
“Personal Speed Dial” on page 7-36 for a Single Line Telephone (SLT).
Operation
To set PSD numbers:
Hardware Requirements
•N/AAction Result
1.   If not already...

Section 700 - Operation Chapter 4. User Maintenance
576-50-700 DBS 576 (USA) issued September 2001 4-23
Related Programming
•N/A
Considerations
•N/A
Set Send Text Messages
Description
You can send a text message to a key telephone with a display when you are sending call waiting 
signal (Auto camp-on or manual camp-on). This menu item specifies the text messages that may be 
sent.
Operation
To set Send Text Messages using either a large-display or small-display phone:
Action Result
1.   If not already in...

4-24 DBS 576 (USA) issued September 2001 576-50-700
Chapter 4. User Maintenance Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Set Special Day Mode
Description
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page 
3-27.)
You can specify up to 20 special days for the System. For each special day, you can specify up to 5 
modes settings.
10.   Use the bottom row of FF keys to select a single letter. 
•   See Example...

Section 700 - Operation Chapter 4. User Maintenance
576-50-700 DBS 576 (USA) issued September 2001 4-25
Operation
To set the Special Day Modes:
Action Result
1.   If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on 
page 4-3.)  81-
  User MAINT displays
2.   At the 81 level, enter 07.  
3.   Press the HOLD key.  8107-
  System Mode displays
4.   Enter 1.  
5.   Press the HOLD key.  1-
  Mode Special Day displays
6.   Press the HOLD key.  1000...

4-26 DBS 576 (USA) issued September 2001 576-50-700
Chapter 4. User Maintenance Section 700 - Operation
Table 4-4.   Special Day Start Time/Mode - addresses & values  
15.   Press the AUTO key to exit the entry mode.   1-
  Mode Special Day displays
16.   To return to the top menu level (81), press the PROG key. 
OR...
To exit the User Maintenance mode, press the ON/OFF 
key.   81-
  User MAINT displays
  OR...
  ON/OFF LED goes off
FF8  1  07  1 (1000-1219)  Hold  (MMDD or HHMM or 0-5)  Hold
-- VALUES...