Panasonic DBS 576 Technical Manual

Section 700 - Operation Chapter 3. System Features
576-50-700 DBS 576 (USA) issued September 2001 3-53
DID Busy/Delayed Ringing is also available for hunt group pilot numbers. However, when the 
Queuing Timer expires, the call leaves the hunt group and is forwarded to the DID Busy/Delayed 
Ringing destination.
Hardware Requirements
•N/A
Related Programming
• FF1-4: DID Day Busy/Delayed Destination
• FF1-4: DID Night Busy/Delayed Destination
• FF5-0-02: Queuing Timer
Considerations
• Call Forwarding takes...

3-54 DBS 576 (USA) issued September 2001 576-50-700
Chapter 3. System Features Section 700 - Operation
Slide Ringing
Similar to Delayed Ringing, Slide Ringing allows an alternate position to answer calls. If a call is not 
answered within a slide ringing time period, the call can be set to ring at another phone with that trunk 
key.
One possible use for Slide Ringing is in an office with a common secretary. A non-ringing FF key can 
be assigned for each CO trunk used by the group. If a call is not...

Section 700 - Operation Chapter 3. System Features
576-50-700 DBS 576 (USA) issued September 2001 3-55
Considerations
•N/A
Station Message Detail Recording 
Description
Station Message Detail Recording (SMDR) provides detailed call records of outgoing calls. This 
record is printed on a serial printer connected to the RS-232C port. SMDR records can also be output 
to an external call accounting system.
Various types of information are reported on the SMDR record and each type of information occupies 
a...

3-56 DBS 576 (USA) issued September 2001 576-50-700
Chapter 3. System Features Section 700 - Operation
For example, an incoming call is a DID/DDI Incoming call (D), but it is also a transferred call. The 
SMDR data condition code will be t to indicate that the call was an Incoming Transfer call. (A 
transferred call’s condition code takes precedence over the type of call - DID/DDI Incoming call [D].)
Figure 3-2. Output data format
Condition Code: (I: Incoming call / D: DID.DDI incoming call / h: Hold...

Section 700 - Operation Chapter 3. System Features
576-50-700 DBS 576 (USA) issued September 2001 3-57
Accounting Code (10 digits max.)/Verified Account Code (Verified Account Code table number 
V001 to V500)
DISA Security Code ID (DISA ID Code table number D001-D016)
Caller Data (Formats #2 and #3 only) (Format #2: Max 12 digits, Format #3: Max 16 digits)
ISDN Charge Data (Format #2 only - originator number applies to ISDN only) - Not used (Format # 2 
only) Future Use
Incoming Ringing Time (Formats #2...

3-58 DBS 576 (USA) issued September 2001 576-50-700
Chapter 3. System Features Section 700 - Operation
Related Programming
• FF2: T1-CO Lines
Considerations
• The T1 Line proivdes trunk signaling modes for Loop Start, Ground Start, and E&M.
• Also see Class of Service - T1 Trunk Ring Back Service Tone on p. 3-16 for more information on 
T1 Line features.
Toll Restriction Service 
Description
Toll Restriction Service (TRS) allows access levels, including the prohibition of long distance calls or...

Section 700 - Operation Chapter 3. System Features
576-50-700 DBS 576 (USA) issued September 2001 3-59
Trunk Access Groups
Description
Trunks can be placed in trunk groups. When a trunk group is accessed, the System automatically 
selects an open trunk from the group.
Operation
To access a trunk group:
Hardware Requirements
•N/A
Related Programming
• FF1-3: MCO Access
Considerations
• Trunks can only appear in one trunk group.
• If Automatic Call Routing is enabled, the MCO access code (9 by default)...

3-60 DBS 576 (USA) issued September 2001 576-50-700
Chapter 3. System Features Section 700 - Operation
Virtual extensions provide a mechanism for ringing multiple phones simultaneously. For instance, a 
Direct Inward Dialing (DID) entry can only be set to ring to one extension number. However, if the 
DID is set to ring a virtual extension and the virtual extension is assigned to ring keys on multiple 
extensions, the DID will ring the multiple extensions.
Hardware Requirements
•N/A
Related Programming...

Section 700 - Operation Chapter 3. System Features
576-50-700 DBS 576 (USA) issued September 2001 3-61
PanaVOICE Courier can also be installed on an external PC and connected to the DBS 576 via an API 
card. See your PanaVOICE documentation for further details.
Third-Party Voice Mail Support
Description
The System supports third party Voice Mail systems with features such as:
• Answer Supervision for Voice Mail
• Call Forward ID Code for Voice Mail
• Direct Inward Dial (DID)/DNIS/Direct Dial Inward (DDI)...

3-62 DBS 576 (USA) issued September 2001 576-50-700
Chapter 3. System Features Section 700 - Operation
Call Forward ID Code for Voice Mail
Call Forward ID Code for Voice Mail allows you to call forward to a third-party Voice Mail system. 
The ID Code sends the digits that are required by the Voice Mail to identify the System extension. 
Operation
To set a Call Forward ID Code for Voice Mail:
To clear the ID Code:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
DID/DNIS/DDI Voice...