Panasonic Digital AV Mixer Agmx70 Operating Instructions

							31
Effect-by-effect setting screens
Pos. X 128 Y 128
Z 196
Event ME Time Pattern INT
00E10:00F0013 Wht
Transition
Modify
Pattern
Edge HardWidth
32Color
White
Effects
Off Off
The settings for the transition and key patterns are performed on these screens.  The items that can be set differ from one
pattern to another.  The LCD display changes as soon as one of the patterns is selected.  The key slice, slope, key level,
crop, edge, effects and DVEPlus settings are stored in the memory for each effect group.  If the system was started using
Reset, the default settings are established.  Furthermore, the 3D modify settings are stored for each pattern group.
[Transition] wipe pattern settings
The transition wipe patterns (numbers 1 to 2999) are opened directly or when selected using the number keys.

When transition numbers 200 to 222 (1001 to 1004, 1021 to 1023, 1030 to 1034 and 1059 to 1069) and 1981 to 1983 are
selected, the pattern is changed to MIX (56).
[Modify] settings
The item to be changed in the pattern is selected from [Off],
[Comp] (compression), [Slide], [Multi] and [Blinds] using the
rotary 2 control.  The default setting is [Off].
The levels applying when the settings are selected are set
using the rotary 3 control.
With the [Comp] setting: ....... [Single] or [Both]
With the [Slide] setting:  ........ [Single] or [Both]
With the [Multi] setting: ......... [H3], [V3], [HV3], [H6], [V6],
[HV6], [Pair], [H3 Pair], [V3
Pair], [HV3 Pair], [H6 Pair],
[V6 Pair], [HV6 Pair]
With the [Blinds] setting:  ...... None
Only the basic patterns and their related patterns can be
set.
Modify
Off
Off
Comp
Slide
Multi
Blinds
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5 
						

							32
Effect-by-effect setting screens
[Pattern Edge] setting
This is used to set edges for the patterns.  The border color
set here is used as the border matte for trail.  It is updated
by the color which is read out for the direct pattern.
Select [Hard], [Soft], [Border] or [Soft Border] using the
rotary 2 control.  The default setting is [Hard].
When [Soft] or [Soft Border] has been selected, No.2001 to
2195 and 6008 to 6010 patterns cannot be selected.
When [Soft Border] has been selected, the #701 to No.707
(24 to 27), 801 to 814 (183 to 196) patterns cannot be
selected.
The [Width] thickness can be set to any value from 1 to 255
using the rotary 3 control.  The default setting is 32.  Only 1
or 2 can be set for [Width] if any of the following patterns
have been selected:
≥ No.701 to 707 (24 to 27), 801 to 814 (183 to 196)
Select the [Color] border color using the rotary 4 control.
[White], [Yellow], [Cyan], [Green], [Magenta], [Red], [Blue],
[Black], [Custom1] or [Custom2] can be selected.  Custom1
and Custom2 are colors which have been set by INT Matte.
Pattern
Edge HardColor
White
Hard
Soft
Border
Soft Border
1 - 255White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
Custom1
Custom2
Width
32
R1 R2 R3 R4 R5

When the PinP pattern has been selected and STILL is executed through B bus, the edge cannot be reflected. 
						

							33
≥When [Trail] has been set
Set the trail color and spark using the rotary 3 control.
Select the [Self] original image, [Self-spark], [BodM]
border color or [BodM-spark] border spark.
The time can be set to any value from 1 to 32 using the
rotary 4 control.
When trail has been set, the trail offset position can be set
by setting the position while holding down [Shift].  In this
case, the center, scene grabber and hold buttons flash
temporarily.  Whichever trail or shadow effect was
selected last among trail and shadow for DSK, and multi
strobe and decay for A/B videoEffects takes effect, and
the previous effect is canceled.

Only one of three settings—namely, soft, border or soft border—for both multi strobe and pattern edges can be selected
when a special pattern has been selected.  For further details, refer to the note on page 26.
Effects
TrailTime
16Light
On
Lights
when 3D
board has
been
installed.Self
Self-spark
BodM
BodM-spark
1 - 32
Self
Effects
OffLight
On
Off
Shadow
Trail
Lights
when 3D
board has
been
installed.
Effects
ShadowLight
On
Lights
when 3D
board has
been
installed.
[Effects] setting
This is used to perform the DVE settings.
Select the [Off], [Shadow] or [Trail] effect using the rotary 2
control.
Set the [Light] (lighting) using the rotary 5 control.  This is
valid only when the 3D optional board (AG-VE70) has been
installed for use.
≥When [Shadow] has been set
When [Shadow] has been selected, the shadow position
can be set by setting the position while holding down
[Shift].
In this case, the center, scene grabber and hold buttons
flash temporarily.
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
Effect-by-effect setting screens 
						

							34
Effect-by-effect setting screens
Pos. X 128 Y 128
Z 196
Event ME Time Pattern INT
00E10:00F3101 Wht
Chroma Key 1 R = - - - G = - - - B = - - -
Key
Color
CancelOffset
128C Slice
128C-Area
3Mono L
6
Crop
A
28
127
12
Effects
Off
DVE
Plus Off 6301
3D
ModifyRotate
0Time
0TransF
255 KeyColor
1Slice1
128Slope1
8K Level
255
[Chroma Key] setting
The chroma key is opened directly or when selected using the number keys.  ME is automatically selected for the Preview
output, and the chroma key cursor and keyed output are displayed.
Display of selected
number: 1, 2 or 3 is
selected.
Selected color display
Displayed only
with 3Dop
Displayed by DVEPlus
only with special
patterns
Scrolled display
[Key] setting
Up to three colors to be removed can be stored in the
memory.  After selecting the number of the color using the
rotary 2 control, align the cursor on the chroma key preview
screen with the color (blue) that is to be removed, using
joystick X and Y, and store the color in the memory using
[Enter].  The previous values will be overwritten in this
process.  To release a color which has been stored in the
memory, press [Shift] + [Selected number].
The [Slice] level of the selected colors can be set to any
value from 0 to 225 using the rotary 3 control.
The [Slope] level setting of the selected colors can be set to
any value from 0 to 15 using the rotary 4 control.
The [K Level] key (transparency) level can be set to any
value from 0 to 255 using the rotary 5 control.  This setting
is valid for all the colors stored in the memory.  It can also
be set separately from the other keys.
KeyKeyColor
1Slice1
128Slope1
8K Level
255
0 - 15
0 - 2551 - 30 - 255
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
6
A
Border Color
White 
						

							35
[Color cancel] setting
This is used to perform the settings for color cancel.
The offset from the [Offset] key can be set to any value from
0 to 255 using the rotary 2 control.
The [C Slice] (cancel slice) can be set to any value from 0 to
255 using the rotary 3 control.
The [C-Area] (cancel area) can be set to any value from 0 to
3 using the rotary 4 control.
The [Mono L] (monochrome level) can be set to any value
from 0 to 15 using the rotary 5 control.
[Crop] setting
This is used to perform the crop settings for the keys.
These settings can be performed separately with [LumKey],
[EXTKey] and [PatternKey].
The top part of the image can be set to any value from 2 to
230 (NTSC) or to 277 (PAL) using the rotary 2 control.  The
default setting is 6.
The bottom part of the image can be set to any value from 2
to 230 (NTSC) or to 277 (PAL) using the rotary 3 control.
The default setting is 2.
The left part of the image can be set to any value from 0 to
680 using the rotary 4 control.
Effect-by-effect setting screens
Color
CancelOffset
128C Slice
128C-Area
3Mono L
6
0 - 255
0 - 2550 - 30 - 15
Crop
A
28
127
12
2 - 230
(NTSC)
2 - 277
(PAL)
2 - 230
(NTSC)
2 - 277
(PAL)0 - 6800 - 680
The right part of the image can be set to any value from 0 to 680 using the rotary 5 control.  The default setting in each case
is 12.
If the top setting is changed, the bottom setting will change, and vice versa, in such a way that the total setting will not exceed
230 (NTSC) or 277 (PAL).  Similarly, if the left setting is changed, the right setting will change, and vice versa, in such a way
that the total setting will not exceed 680.  The left and right settings can be changed in 1-step increments.
[Border] setting
Select the [Color] (border color) using the rotary 2 control.  There are 10 choices: White, Yellow, Cyan, Green, Magenta, Red,
Blue, Black, Custom1 and Custom2.  The default setting is [White].  Custom1 and Custom2 are colors which have been set
by INT Matte.
[Effects] setting
The effects can be added in the same way as with the basic patterns.  The default setting is [Off].
[DVE Plus]
This takes effect only when the 3D optional board (AG-VE70) has been installed.
It is possible to add the DVEs in key numbers 3401 to 3478, 3601 to 3623, 6001 to 6003, 6006, 6007, and 6009 to 6634.
Select [On] or [Off] using the rotary 2 control.  The default setting is [Off].
The numbers are input using the rotary 3, 4 and 5 controls.  The parameters for patterns with numbers 6001 to 6438 and
6601 to 6716 can be changed with [3D Modify].
R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
6
A 
						

							36
[Luminance Key] and [EXT Key] (external key) settings
The luminance key and external key are opened directly or when selected using the number keys.
Effect-by-effect setting screens
Pos. X 128 Y 128
Z 196
Event ME Time Pattern INT
00E10:00F3102 Wht
Luminance Key
Key
Crop
A
28
127
12
Effects
Off
DVE
Plus Off 6301
3D
ModifyRotate
0Time
0TransF
255 Slice
0Slope
15K Level
255Luminance Key
Ext Key
Scrolled displayDisplayed only
with 3D option
Displayed by
DVEPlus only with
special patterns
[Key] setting
The [Slice] level can be set to any value from 0 to 255 using the rotary 3 control.  The default setting is 0.
[Slope] can be set to any value from 0 to 15 using the rotary 4 control.  The default setting is 15.
The [K Level] key level can be set to any value from 0 to 255 using the rotary 5 control.  This can be set separately from the
other keys.  The default setting is 255.
The crop setting can also be set separately from the other keys.  Effects can be added for the effect settings in the same way
as for other patterns.  The settings are performed as with the DVE’s chroma key. R1 R2 R3 R4 R5
6
A
Border Color
White 
						

							37
Effect-by-effect setting screens
[Title Key] setting
The title key is opened directly or when selected using the number keys.  It is not displayed when Page is 0.  The number of
frames (number of pages) that can be stored in the memory for PC Title can be set on the [Setup] screen.
Pos. X 128 Y 128
Z 196
Event ME Time Pattern INT
00E10:00F9501 Wht
Title Key Still
Key
Effects
Off
Crop
A
28
127
12
DVE
Plus Off 6301
3D
ModifyRotate
0Time
0TransF
255 Slice
0Slope
0K Level
255Still
Crawl
Roll
Movie
Scrolled display
Displayed only
with 3D option
Displayed by DVEPlus
only with special
patterns
[Key] setting
The playback type of the title is displayed in the top section.
The [Slice] level can be set to any value from 0 to 255 using the rotary 3 control.  The default setting is 0.
[Slope] can be set to any value from 0 to 15 using the rotary 4 control.  The default setting is 15.
The key level can be set to any value from 0 to 255 using the rotary 5 control.  This can be set separately from the other
keys.  The default setting is 255.
The crop setting can also be set separately from the other keys.  Effects can be added for the effect settings in the same way
as for other patterns.  The settings are performed as with the DVE’s chroma key.

The title key cannot be selected during DSK execution.R1 R2 R3 R4 R5
6
A
Border Color
White 
						

							38
Effect-by-effect setting screens
[Basic Pattern Key] setting (numbers 3001 to 3046)
The basic pattern key is opened directly or when selected using the number keys.
Pos. X 128 Y 128
Z 196
Event ME Time Pattern INT
00E10:00F3002 Wht
Basic Pattern Key
Pattern
Edge
Effects
Off
DVE
Plus Off 6301
3D
ModifyRotate
0Time
0TransF
255
Key
LearnEmpty
9000 Setup HardWidth
16Color
WhiteK Level
255
Scrolled display
Select [Hard], [Soft], [Border] or [Soft Border] using the rotary 2 control.  The default setting is [Hard].
The thickness can be set to any value from 0 to 255 using the rotary 3 control.  The default setting is 16.
Select the border color using the rotary 4 control.  [White], [Yellow], [Cyan], [Green], [Magenta], [Red], [Blue], [Black],
[Custom1] or [Custom2] can be selected.  The default setting is [White].
The key level (transparency level) can be set to any value from 0 to 255 using the rotary 5 control.  This can be set
separately from the other keys.  The default setting is 255.
Displayed only
with 3D option
Displayed by
DVEPlus only with
special patterns
R1 R2 R3 R4 R5 
						

							39
Effect-by-effect setting screens
Other key settings (numbers 3301 and up)
The pattern keys are opened directly or when selected using the number keys.
The size is set using the rotary Z control.  With patterns whose positions can be changed, the position can be set using the
joystick.
Pos’X 128 Y 128
Z 196
Event ME Time Pattern INT
00E10:00F3301 Wht
Pattern Key
Pattern
Edge
Effects
OffLight
On
Crop
A
28
127
12
3D
ModifyRotate
0Amp
16Time
16
Key
LearnEmpty
9000 Setup HardWidth
16Color
WhiteK Level
255
Scrolled display
Valid only with special
patterns
Displayed only with
special patterns
during 3D option
[Pattern edge] setting
This is used to set the pattern edge.
Select [Hard], [Soft], [Border] or [Soft Border] using the
rotary 2 control.  The default setting is [Hard].
When [Soft] or [Soft Border] has been selected, No. 2001 to
2195 and 6008 to 6010 patterns cannot be selected.
When [Soft Border] has been selected, No. 701 to 707 (24
to 27), 801 to 814 (183 to 196) patterns cannot be selected.
The [Width] thickness can be set to any value from 1 to 255
using the rotary 3 control.  The default setting is 16.  Only 1
or 2 can be set for the thickness setting if any of the
following patterns have been selected:
• No. 701 to 707 (24 to 27), 801 to 814 (183 to 196)
Select the [Color] (border color) using the rotary 4 control.
[White], [Yellow], [Cyan], [Green], [Magenta], [Red], [Blue],
[Black], [Custom1] or [Custom2] can be selected.
Pattern
Edge HardWidth
16Color
WhiteK Level
255
1 - 255
Hard
Soft
Border
Soft Border
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
Custom1
Custom20 - 255
The default setting is [White].
The [K Level] key level (transparency level) can be set to any value from 0 to 255 using the rotary 5 control.  This can be set
separately from the other keys.  The default setting is 255.
The crop setting can also be set separately from the other keys.  Effects can be added for the effect settings in the same way
as for other patterns.R1 R2 R3 R4 R5
R1 R2 R3 R4 R5
6
A 
						

							40
Effect-by-effect setting screens
3D
ModifyRotate
128Time
0TransF
255
0 - 255
0 - 2550 - 255
3D
ModifyWidth
192Angle
96Time
48Amp
32
0 - 255
0 - 2550 - 2550 - 255
3D
ModifyWidth
160Angle
96Amp
48
0 - 255
0 - 2550 - 255
3D
ModifyRotate
128Axis
0View
128Depth
64
0 - 255
0 - 2550 - 2550 - 255
[3Dmodify] setting
This takes effect only for the special 3D patterns (numbers 6001 to 6438 and 6601 to 6716) when the 3D optional board (AG-
VE70) has been installed.
The parameters of the pattern for the 3D keys can be changed using the rotary 2, 3, 4 and 5 controls.  They can be stored in
the memory for each pattern.
≥With the sphere group (numbers 6001, 6301 to 6438)
R2: [Rotate] (rotation) setting
R4: [Time] setting
R5: [TransF] (transformation) setting
≥With the flag group (numbers 6002, 6101 to 6139)
R2: [Width] (flag width) setting
R3: [Angle] setting
R4: [Time] (fluttering time) setting
R5: [Amp] (amplitude) setting
≥With the accordion group (numbers 6003, 6201 to
6239)
R2: [Width] (accordion width) setting
R3: [Angle] setting
R5: [Amp] (amplitude) setting
≥With perspectives (numbers 6006 and 6007, 6601 to
6634 and 6501 to 6532)
With door number 6004 to 6005, 6701 to 6716 groups
R2: [Rotate] (rotation) setting
R3: [Axis] (rotary axis) setting
R4: [View] (viewer) setting
R5: [Depth] setting
6007 to 6007: All parameters can be set.
6601 to 6634: Only [View] and [Depth] can be set.
6501 to 6532: Only [View] and [Depth] can be set.
Door
6004 to 6005: Only [Depth] can be set.
6701 to 6716: Only [View] and [Depth] can be set.
R1 R2 R3 R4 R5 R1 R2 R3 R4 R5 R1 R2 R3 R4 R5 R1 R2 R3 R4 R5