Panasonic Digital Camera Dmc Ts4 Owners Manual For Advanced Features

							- 141 -
Playback/Editing
You can add text (comments) to pictures. After text has been registered, it can be stamped 
in prints using [Text Stamp] (P143).
Select [Title Edit] on the [Playback] menu.  (P46)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Enter the text.  (P90)
•Exit the menu after it is set.
Note
•To delete the title, erase all the text in the text input screen.•You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on the 
CD-ROM (supplied).
•You can set up to 100 pictures at one time in [MULTI].•You cannot use [Title Edit] for the following types of pictures:–Motion pictures–3D pictures–Pictures recorded with other equipment
[Title Edit]
Select the picture, and then press 
[MENU/SET] to set.
•[’] is displayed for pictures with titles 
already registered.
[MULTI] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is 
pressed again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures. 
						

							Playback/Editing
- 142 -
You can display other location names or landmark names as selectable candidates by 
searching the database in this unit using the location information of the picture when it was 
recorded. Location name information can be changed by overwriting with selected 
candidate information.
Select [Place-Name Edit] on the [Playback] menu.  (P46)
Press  2/1 to select a picture with [ ] icon, and then press 
[MENU/SET].
Press  3/4 to select item, and then press [MENU/SET].
•Exit the menu after it is executed.
Note
•Pictures recorded using Panasonic cameras (LUMIX) with the GPS function released in or 
before 2010 cannot be edited.
[Place-Name Edit]
ItemSettings
[Candidate] Display other candidates by searching within the database in this unit.
1Press 
3/4  to select the item to change, and then press 
[MENU/SET].
2Select the candidate from the search result, and then 
press [MENU/SET].
[Direct] Stored location or landmark name can be changed with the text entry 
function.•For details on how to enter character, refer to “Entering Text” on P90.
[Repeat] Copy the contents of the last performed edit into other pictures.
•Confirmation screen is displayed. It is executed when [Yes] is 
selected.
•The contents of the edit are copied to the selected pictures. 
						

							- 143 -
Playback/Editing
You can stamp the recording date/time, name, location, travel date, the location name or 
landmark name stored by the GPS function, etc., onto the recorded pictures.
Select [Text Stamp] on the [Playback] menu. (P46)
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Press  3/4 to select [Set], and then press [MENU/SET].
Press  3/4 to select text stamp items, and then press [MENU/SET].
[Text Stamp]
Select the picture, and then press 
[MENU/SET] to set.
•[‘ ] is displayed on pictures already with 
date or text stamped.
[MULTI] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is 
pressed again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures. 
						

							Playback/Editing
- 144 -
Press 3/4 to select the settings, and then press [MENU/SET].
ItemSetting item
[Shooting Date]
[W/O TIME]:Stamp the year, month and day.
[WITH TIME]:Stamp the year, month, day, hour and minutes.
[OFF]
[Name] []:
([Face Recognition])Name registered in Face Recognition will be 
stamped.
[]:
([Baby/Pet])Stamps names registered in name settings for 
[Baby1]/[Baby2] or [Pet] in Scene Mode.
[OFF]
[Location]
[ON]:Stamps the travel destination name set under 
[Location].
[OFF]
[Travel Date][ON]:Stamps the travel date set under [Travel Date].
[OFF]
[Title][ON]:Title input in the [Title Edit] will be stamped.
[OFF]
[Country/Region][ON]:Stamps the Location name information or 
latitude/longitude recorded with GPS function.
[State/Prov./County]
[OFF]
[County/Township]
[City/Town/Village]
[Landmark]
[Longitude/Latitude]
[Sensor Information]
[ON]:Stamps the direction/altitude/atmospheric 
pressure information.
[OFF] 
						

							- 145 -
Playback/Editing
Press [ ].
Press 3 to select [OK], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 100 pictures at one time in [MULTI].•The picture quality may deteriorate when text stamping is carried out.•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the images smaller than 0.3 M, it is difficult to read it.•The whole set of characters may not be stamped for location names or landmark names that 
have many characters.
•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures–Pictures recorded without setting the clock and title–Pictures with date or text stamped–Pictures recorded with other equipment 
						

							Playback/Editing
- 146 -
Recorded motion picture can be divided in two. It is recommended for when you want to 
divide a part you need with a part you do not need.
It cannot be restored once divided.Note
•
[Video Divide] may not be performed on motion pictures recorded with other equipment.•Motion pictures cannot be divided at a location close to the start or end of the motion picture.•With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictur es by using [Calendar] or [Video Only] in the 
[Filtering Play].
•Motion pictures with a short recording time cannot be divided.
[Video Divide]
Select [Video Divide] on the [Playback] menu.  (P46)
Press  2/1 to select the motion picture to divide, and then press 
[MENU/SET].
Press  3 at the location to divide.
•Motion picture is played back from the same location when  3 is 
pressed again.
•You can finely adjust the location for division by pressing  2/1 
while the motion picture is paused.
Press  4.
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Motion picture may be lost if the card or battery is removed while processing the 
dividing. 
						

							- 147 -
Playback/Editing
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of 
pixels) is reduced.
Select [Resize] on the [Playback] menu. (P46)
Note
•You can set up to 100 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•The following images cannot be resized.–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures–Pictures with date or text stamped
[Resize]
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Select the picture and size.
[SINGLE] setting1Press  2/1  to select the picture, and then press 
[MENU/SET].
2Press  2/1  to select the size, and then press 
[MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed.
[MULTI] setting
1Press  3/4  to select the size, and then press 
[MENU/SET].
2Press  3/4 /2 /1 to select the picture, and then press 
[DISP.].
•
Repeat this step for each picture, and press [MENU/SET] to 
set.
•Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed. 
						

							Playback/Editing
- 148 -
You can enlarge and then crop the important part of the recorded picture.
Select [Cropping] on the [Playback] menu. (P46)
Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•The following images cannot be cropped.–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures–Group of pictures taken in [Time Lapse Shot]–Pictures with date or text stamped•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [Cropping].
[Cropping]
Press  2/1 to select the picture, and then press [MENU/SET].
Use the zoom button and press  3/4/2/1 to select the parts to be 
cropped.
Zoom button [T]: Enlargement
Zoom button [W]: Reduction
3 /4 /2 /1: Move
0ø0õ 
						

							- 149 -
Playback/Editing
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back only the pictures set as favo rites. ([Favorite] in [Filtering Play])•Play back the pictures set as favorites only as a slide show.•Delete all the pictures not set as favorites. ([All Delete Except Favorite])
Select [Favorite] on the [Playback] menu.  (P46)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
∫ Canceling all the [Favorite] settings1Select [Favorite] on the [Playback] menu.
2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•You can set up to 999 pictures as favorites.•You may not be able to set pictures taken with other equipment as favorites.
[Favorite]
Select the picture, and then press 
[MENU/SET].
•The setting is canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures. 
						

							Playback/Editing
- 150 -
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to  print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the built-in 
memory, copy them to a card  (P154) and then set the print setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Select [Print Set] on the [Playback] menu.  (P46)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Press  3/4 to set the number of prints, and then press [MENU/SET] 
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
•Exit the menu after it is set.
[Print Set]
Select the picture, and then press 
[MENU/SET].
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures.