Panasonic Digital Camera Dmc Ts4 Owners Manual For Advanced Features

							- 201 -
Others
•Is the camera connected to the TV correctly?> Set the TV input to External Input Mode.
•Depending on the TV model, the pictures may be  extended horizontally or vertically or they 
may be displayed with their edges cut off.
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of 
the TV? > Connect the camera to the TV with the AV  cable (supplied), or with the HDMI micro cable 
(optional), and then play back the motion pictures on the camera.  (P155)
> Check [TV Aspect] setting.  (P58)
•Is it connected properly with the HDMI micro cable (optional)?  (P155)
> Confirm that the HDMI micro cable (optional) is firmly fitted.
> Press [ (] on this unit.
•Is the [VIERA Link] on this unit set to [ON]? (P59)
> Depending on HDMI terminal of the TV, the i nput channel may not switch automatically. In 
this case, use the remote control for the TV to switch input. (For details on how to switch 
input, please read the operating instructions for the TV.)
> Check the VIERA Link setting on the connected device.
> Turn the power to the unit off and then back on again.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On]. (Refer to the operating 
instructions of the TV for details.)
•Is the camera connected to the PC correctly?•Is the camera recognized by the PC correctly?
> Set to [PC] in [USB Mode].  (P58, 165)
TV, PC and printer
The picture does not appear on the television.
The display areas on the TV screen and the camera’s LCD monitor are different.
The motion pictures cannot be played back on a TV.
The picture is not displayed fully on the TV.
VIERA Link does not work.
The picture cannot be transferred when the camera is connected to a PC. 
						

							Others
- 202 -
>Disconnect the USB connection cable. Connect it again while the card is inserted in the 
camera.
> If there are two or more USB terminal on a single PC, try connecting the card to another 
USB terminal.
> Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not 
format.
> If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB 
connection cable after turning off the power.
> Confirm that the login information (login ID/user name/mail address/password) is correct.
> Confirm that the PC is connected to the Internet.
> Confirm that resident software such as virus protection software or firewall is not blocking 
access to YouTube or Facebook.
> Confirm with YouTube or Facebook as well.
•Pictures cannot be printed using a printer which does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode].  (P58, 169)
> When using a printer with a Cropping or Borderless Printing function, cancel this function 
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the pictures can be 
printed with both ends.
•Since aspect ratio of a panorama picture differs from normal pictures, it may not always be 
possible to print it correctly.
> Please use a printer that supports panorama pictures. (For details, please see the 
operating instructions of your printer)
> We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to 
adjust the size of the still picture to the print paper size.
The card is not recognized by the PC. (The built-in memory is recognized.)
The card is not recognized by the PC. (SDXC memory card is used.)
There is a problem trying to upload to YouTube or Facebook.
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly. 
						

							- 203 -
Others
•Press [MENU/SET] after viewing the last screen (12/12). For details, refer to P9.
> Press [MENU/SET], select the [Setup] menu icon [ ]. Then press [MENU/SET], and then 
select the [ ~] icon to set the desired language.  (P60)
•AF Assist Lamp will turn on white in the dark place to assist the focusing.
•Is [AF Assist Lamp] on the [Rec] menu set to [ON]?  (P108)•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not affect the performance 
or quality of the camera.
•Have foreign objects become trapped?
> Remove the foreign objects.  (P10)
•When closing, do not set the [LOCK] switch to the locked side. Doing so may cause damage or 
leaks.
> Release the lock.  (P21)
•If the camera is used in cold places such as ski resorts or places at high altitude with the snow 
or water droplets adhered to the camera, some parts of the camera may become hard to move 
with snow or water droplets freezing in the gap of the zoom button or the camera [ON/OFF] 
button. This is not a malfunction. When the camera returns to normal temperature it will 
function as normal.
•When using the camera in a place with sand or dust, some parts of the camera may become 
hard to move with foreign objects getting in the gap of the zoom button, or the camera [ON/
OFF] button. Either clean with the supplied brush or wash off with fresh water.
•Below cases are not malfunctions, so you can use the camera as normal.
> You hear a “rattling” sound when the camera is shaken while the power is off or during 
Playback Mode (this is the sound of the lens moving).
> When power is turned on or off, or when switching from recording to Playback Mode, there 
is a rattling noise (this is the sound of the lens moving).
> When zooming, you can feel some vibration (this is caused by the lens moving).
Others
[Requirements for Underwater use] is displayed repeatedly whenever the power 
is turned on.
An unreadable language was selected by mistake.
A white lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The side door will not close.
A part of the camera such as the zoom button and side door does not move.
The camera makes a rattling sound or you can feel some vibration. 
						

							Others
- 204 -
•When the brightness changes due to zoom or camera movement etc., the lens may click and 
the picture on the screen may drastically change. However, the picture is not affected. The 
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
•If you do not use the camera for a long time, the clock may be reset. > [Please set the clock] message will be displayed; please reset the clock.  (P27)
•When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a 
malfunction.
•Is the camera set to Macro Zoom Mode?  (P68)
Maximum zoom during Macro Zoom Mode is 3 k digital zoom.
•When you perform an operation after taking a certain action, the pictures may be recorded in 
folders with different numbers from th e ones used prior to the operation.
•If the battery was inserted or removed without first turning the camera’s power off, the folder 
and file numbers for the pictures taken will not be stored in the memory. When the power is 
then turned back on and pictures are taken, they may be stored under file numbers which 
should have been assigned to previous pictures.
•This is the [Auto Demo] to introduce the features of the camera. Press a button to return the 
camera to the original screen.
•When [GPS Setting] is set to [OFF], magnetic declination is not corrected.
> Perform [Repositioning] of [GPS/Sensor] menu  (P118), and acquire correct latitude/
longitude of the current location.
The lens clicks.
The clock is reset.
Zooming stops instantaneously.
Zoom does not go up to maximum magnification.
The file numbers are not recorded consecutively.
The file numbers are recorded in ascending order.
When the camera is left alone, the slide show is suddenly displayed.
Bearing information measured with this unit is different from the public bearing 
indications. 
						

							• SDXC Logo is a trademark of SD-3C, LLC.
• “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony 
Corporation.
• Manufactured under license from Dolby  Laboratories.
Dolby and the double-D symbol are trademarks 
of Dolby Laboratories.
• HDMI, the HDMI Logo, and High-Definition  Multimedia Interface are trademarks or 
registered trademarks of HDMI Licensing LLC 
in the United States and other countries.
• HDAVI Control™ is a trademark of Panasonic  Corporation.
• QuickTime and the QuickTime logo are  trademarks or registered trademarks of Apple 
Inc., used under license therefrom.
• iMovie, Mac and Mac OS are trademarks of  Apple Inc., registered in the U.S. and other 
countries.
• Windows and Windows Vista are either register ed trademarks or trademarks of Microsoft 
Corporation in the United States and/or other countries.
• YouTube is a trademark of Google Inc.
• This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered  trademark of DynaComware Taiwan Inc.
• Other names of systems and products mentioned in these instructions are usually the  registered trademarks or trademarks of the m anufacturers who developed the system or 
product concerned.
This product is licensed under the AVC patent portfolio license for the personal and 
non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard 
(“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a 
personal and non-commercial activity and/or was obtained from a video provider licensed to 
provide AVC Video. No license is granted or shall be implied for any other use. Additional 
information may be obtained from MPEG LA, LLC. See http://www.mpegla.com
 .