Panasonic Digital Color Imaging Systems For Function Parameters Dp C354 Operating Instructions

							81
 Chapter 4    Fax/Email Settings
Memo 
						

							82
 Chapter 5    Scanner Settings
Chapter 5
Scanner Settings
Scanner Settings
In Scanner User Mode, the following items can be changed.
For details about address book registration, refer to Editing the Address Book in the Operating Instructions (For 
Scanner and Email) on the provided CD-ROM.
Scanner User 
No.ParameterCommentsSelective ItemStandard
Setting
0 - 9 00 Print Scanner Addr List Print a Scanner Addr List. Stop, Start Start
01 Original Mode Default Set the default of Original Mode. Text, T/P (Text/
Photo), PhotoT/P
02 Color Mode Default Set the default of Color Mode. Color, Gray, Black Color
03 Density Default Set the default density. -3 to +3 0
04 Background Removal Set the default of Background 
Removal.Off, Level1 to Level6 Level: 3
05 Contrast Default Set the default contrast. -3 to +3 0
06 Compression Mode (Black) Set the default compression of 
black-and-white image.MH, MR, MMR, JBIG MMR
07 Compression Mode (Color) Set the default compression of 
full-color image.Standard, Speed, 
QualityStandard
08 Compression Mode (Gray) Set the default compression of 
gray-scale image.Standard, Speed, 
QualityStandard
09 File Type (Black) Set the default file type of black-
and-white image.TIFF, PDF PDF
10 - 19 10 File Type (Color / Gray) Set the default file type of full-
color or gray-scale image.JPEG, PDF, 
Comp. PDFJPEG
11 Resolution Def. (BK) Set the default resolution of 
black-and-white image.200dpi, 300dpi, 
400dpi, 600dpi300dpi
12 Resolution Def. (Cl/Gr) Set the default resolution of 
color or gray-scale image.200dpi, 300dpi, 
400dpi, 600dpi200dpi
13 Job Build and SADF Mode Set the default of Job Build and 
SADF.No, Yes No
14 Bind Edge 2-Side Orig. Set the default binding position 
on 2-sided original.Long, Short Long
15 2-Sided Original Def. When it’s set to “Yes”, Default 
setting enables to scan both 
sides of the original document. 
The button on display panel “2-
Sided Original” is highlighted.No, Yes No 
						

							83
 Chapter 5    Scanner Settings
Key Operator
20 - 29 20 Add New Address Append a computer IP Address 
to the address book. *1*1 Parameter No.20, 23, and 25 do 
not require setting as the IP address 
(for the Scanner) is managed (added 
/ edited / deleted) automatically by 
the configuration of the 
Communication Utility Software on 
your computer. Refer to Network 
Scanner Settings in the Operating 
Instructions (For Setting Up) of 
provided booklet.
*2 Refer to Scanning / Email 
(Option) in the Operating Instructions 
(For Basic Operations) of provided 
booklet.
*3 Refer to Adding to the Address 
Book in the Operating Instructions 
(For Scanner and Email) on the 
provided CD-ROM. 21 Add New Email Address Append an Email Address to the 
address book. 
*2
23 Edit Address Book Edit a computer IP Address in 
the address book. *1
24 Edit Address Book: Email Edit an Email Address in the 
address book. *3
25 Delete Address: IP Delete a computer IP Address 
from the address book. *1
26 Delete Address: Email Delete an Email Address from 
the address book. *3
30-34 30 Edit Image Box Name Edit an image box name.
zWhen there is data stored in 
the image box, the name can 
not be changed. 
*3
34 Key Operator Mode Enter the key operator password 
to display the Key Operator 
Menu (see page 83).00000000
No.ParameterCommentsSelective ItemStandard
Setting
0 - 4 00 Print Scanner Settings Print a Scanner Settings list.
To cancel printing the parameter 
setting list, press “Stop” and 
“OK”. 
While processing the 
cancellation, panel operation is 
denied, and an error beep is 
produced.
The feeding paper(s) will be 
ejected before completing the 
above cancellation operation.
If setting a parameter, an 
asterisk mark (*) will be added 
before the parameter number.St o p,  Sta r t Sta r t
01 Delete All Image Files Delete all image files.
Scanner User 
No.ParameterCommentsSelective ItemStandard
Setting 
						

							84
 Chapter 6    Printer Settings
Chapter 6
Printer Settings
Printer Settings
In Printer User Mode, the following items can be changed.
For printing, however, these settings are unnecessary as the computer application software is usually 
used to setup printing.
Settings by computer application software have priority over the ones in this machine. If the Printer 
Settings in the machine are required, consult with a computer literate person. After printing, it is 
recommended to reset the settings to the default values. 
Printer User
No.ParameterCommentsSelective ItemStandard
Setting
0 - 9 00 Number of Prints Set the number of prints. 1 to 999* 1
01 Paper Size Set the paper size. A3, B4, A4, B5, A5, 
11x17, Legal, 8.5x11, 
5.5x8.5, 8x13, 8.5x13, 
7.25x10.5, 12x18, 
Custom8.5x11
02 Paper Tray Set the paper tray.
zTray 3 or 4 is available when 
the optional Paper Tray is 
installed.Auto, Bypass, Tray 1, 
Tray 2, Tray 3, Tray 4Auto
03 Print Direction Set the printing direction. Portrait, Landscap(e) Portrait
05 2-Sided Print Set duplex printing. Off, On Off
06 Bind Edge Set the binding position. Long, Short Long
07 Resolution Set the resolution. 1200dpi, 600dpi 600dpi
08 Font (PCL) Set the font (PCL). 0 to 99* 0
09 Symbol Table (PCL) Set the symbol table (PCL). 0 to 35* 11
10 - 19 10 Pitch (PCL) Set the pitch (PCL). 00.44 to 99.99* 10.00
11 Point Size (PCL) Set the point size (PCL). 004.00 to 999.75 012.00
12 Lines/Page  (PCL) Set the number of lines per page 
(PCL).5 to 123* 60
13 Return Character (PCL) Set the return character (PCL). CR, CR+LF CR
*Select “Input”, and then enter the 
 desired value. 
						

							85
 Chapter 6    Printer Settings
10 - 19 14 Mutual A4/LTR Set A4 and LTR substitute 
printing.Off, On Off
15 Mailbox Memory Status Display the status of remaining 
memory and remaining mailbox.
16 Print Data Print the specified data. Stop, Start Stop
17 PDF Password Input Set value to “On” to add a PDF 
password.Off, On Off
18 SD Print Color Mode Set color mode for SD card 
printing.Color, Black Color
20 - 29 20 Custom Size Unit Set the user-defined unit. mm, inch inch
21 Custom X Size Set the user-defined size in the 
X direction.03.94 to 12.00* 12.00
22 Custom Y Size Set the user-defined size in the 
Y direction.05.83 to 18.00* 18.00
23 Wide A4 Set whether to use Wide A4. Off, On Off
25 Mono Page Detect Set whether to use Mono Page 
Detect.Off, On On
26 Toner Save Set whether to use Toner Save 
mode.Off, On Off
27 Auto Contrast Mode Set whether to use auto contrast 
mode.Off, On Off
29 Key Operator Mode Enter the key operator password 
to display the Key Operator 
Menu (see page 86).00000000
*Select “Input”, and then enter the 
 desired value.
Printer User
No.ParameterCommentsSelective ItemStandard
Setting 
						

							86
 Chapter 6    Printer Settings
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting
0 - 14 00 Print Printer Settings Print a Printer Settings list.
To cancel printing the parameter 
setting list, press “Stop” and “OK”. 
While processing the 
cancellation, panel operation is 
denied, and an error beep is 
produced.
The feeding paper(s) will be 
ejected before completing the 
above cancellation operation.
If setting a parameter, an 
asterisk mark (*) will be added 
before the parameter number.St o p,  Sta r t Sta r t
01 Job Completion Time Set the time-out period if the 
machine does not receive a print 
signal from the computer for a 
specified time.
Select “Input” and enter the job 
completion time.1 to 999 (Sec) 180 (Sec)
02 Page Protection Set value to “On” to use page 
protection.Off, On Off
03 Error Page Print Set value to “On” to print the 
data of an error job.Off, On On
04 Spool Function Set value to “On” to set the 
spool function.Off, On On
05 Text Print Set value to “On” to print a text 
with no pictures.Off, On On
07 Font List Print (PCL) Print the PCL font list. Stop, Start Stop
08 Font List Print (PS) Print the PS font list.
zWhen the optional Printer 
Controller Module (for Adobe
® 
PostScript® 3™) is installed.St o p,  Sta r t Sto p
09 Mailbox Data Holding When the optional hard disk is 
installed, set the limit of storing 
the data in the mailbox. When 
“Infinity” is set, data is not 
deleted. (Hard disk drive is 
Standard on DP-C354/C264)Infinity, 1 day, 2 days, 
3 days, 4 days, 5 
days, 6 days, 7 days7 days
10 Delete Mailbox Data Select the mailbox data to be 
deleted.
•All
All data is deleted from the 
mailbox.
•Before
Deletes the data which is 
received before the specified 
date.All, Before Before 
						

							87
 Chapter 6    Printer Settings
0 -14 11 Print Queue Delete Set an authorized person who 
can delete the print job.
•Free
Any operator can delete the 
print job.
• key Op.
Only Key Operator can delete 
the print job.Free, Key Op. Key Op.
14 Printer Language Set a printer language.
•Auto
The machine prints received 
data by automatically judging 
its printer language.
•PCL
The machine prints received 
data by regarding its printer 
language as PCL.
•PS
The machine prints received 
data by regarding its printer 
language as PostScript.
zWhen the optional Printer 
Controller Module (for Adobe
® 
PostScript® 3™) is installed.Auto, PCL, PS Auto
15 - 29 18 AppleTalk Set “On” to use AppleTalk.
zWhen the optional Printer 
Controller Module (for Adobe
® 
PostScript® 3™) is installed.Off, On On
19 AppleTalk Zone Name Set the AppleTalk zone name.
zWhen the optional Printer 
Controller Module (for Adobe
® 
PostScript® 3™) is installed.
There is no default value. When 
the machine starts up under the 
following parameter settings 18 
Apple Talk is set to On, 19 
AppleTalk Zone Name, and 
20 AppleTalk Printer Name 
are not set, then, Zone Name* 
will be automatically setup.Up to 31 characters *
  No. 18 to 19
After setting, turn the machine’s power switch 
      Off, and then On again.
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							88
 Chapter 6    Printer Settings
15 - 29 20 AppleTalk Printer Name Set the AppleTalk printer 
name.
zWhen the optional Printer 
Controller Module (for Adobe
® 
PostScript® 3™) is installed.
There is no default value. When 
the machine starts up under the 
following parameter settings 18 
Apple Talk is set to On, 19 
AppleTalk Zone Name, and 
20 AppleTalk Printer Name 
are not set, then, “Panasonic 
DP-XXXX and the lower six 
figures of MAC Address” will be 
automatically setup.Up to 31 characters Panasonic 
DP-XXXX-
the lower 
six figures 
of MAC 
Address
21 AppleTalk Type Name The machine detects, and 
display the AppleTalk Type 
Name on the Touch Panel.
zThe Apple Talk Type Name is 
displayed only, but cannot be 
set.
zWhen the optional Printer 
Controller Module (for Adobe
® 
PostScript® 3™) is installed.
22 NetWare Set “On” to use NetWare. Off, On Off
23 NetWare Frame Type Set the NetWare frame type. 802.3, 802.2, Ether-II, 
SNAP802.2
24 Selected Frame Type The machine detects, and 
display the Frame Type on the 
Touch Panel.
zFrame Type is displayed only, 
but cannot be set.
25 NetWare Mode Select NetWare Mode.
•Pserver
The machine is used as Print 
Server, and prints the waiting 
job stored in the machine.
•Rprinter
The machine is used as 
Remote Printer, and prints 
data which is sent from the 
Print Server.Pserver, Rprinter Pserver
26 NetWare Printer Name Set the NetWare printer name. Up to 31 characters
27 Print Server Name Set the print server name. Up to 31 characters
28 Print Server Password Set the print server password. Up to 31 characters
  No. 20 to 23, 25, to 28
After setting any of these parameters, turn the 
machine’s power switch Off, and then On again.
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							89
 Chapter 6    Printer Settings
15 - 29 29 Job Polling Time Set the job polling time.
Select “Input” and enter the job 
polling time.2 to 255 (Sec) 4 (Sec)
30 - 44 30 Bindery Mode Set Bindery Mode when using 
the NetWare.Off, On Off
31 File Server Name 1 Set file server names. Up to 
eight names can be set.Up to 31 characters
32 File Server Name 2
33 File Server Name 3
34 File Server Name 4
35 File Server Name 5
36 File Server Name 6
37 File Server Name 7
38 File Server Name 8
39 NDS Tree Set the NDS tree. Up to 31 characters
40 NDS Context Set the NDS context. Up to 77 characters
41 Print Server Name 1 Set print server names. Up to 
8 names can be set.Up to 31 characters
42 Print Server Name 2
43 Print Server Name 3
44 Print Server Name 4
45 - 59 45 Print Server Name 5
46 Print Server Name 6
47 Print Server Name 7
48 Print Server Name 8
49 Job Time Out Set the job time out.
Select “Input”, and enter the job 
time out.4 to 255 (Sec) 10 (Sec)
50 Use MCP Server Set “Yes” to use MCP (Memory 
Card Printing) server.No, Yes No
  No. 29 to 49
After setting any of these parameters, turn the 
machine’s power switch Off, and then On again.
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							90
 Chapter 6    Printer Settings
45 - 59 51 MCP Server Name Set MCP (Memory Card 
Printing) server names.
zWhen “29 DNS Server 
Address” in General Settings 
is set to “Ye s”, and “50 Use 
MCP Server” in Printer 
Settings is set to “Yes”.Up to 60 characters
52 MCP Server IP Address Set IP address of MCP (Memory 
Card Printing) server.
zWhen “29 DNS Server 
Address” in General Settings 
is set to “No”, and “50 Use 
MCP Server” in Printer 
Settings is set to “Yes”.3-digit x 4 0.0.0.0
53 SD/Direct Use Sort Mem. Set the direct sort memory. Off, On On
55 Sort Set the default sort. None, Sort, Group, 
Shift,
Rot. Grp, RotateSort
56 Staple Set the default staple. None, U Center,
Upper L, Upper R,
L Center, R Center,
Saddle
(R: Right, L: Left,
U: Upper)None
57 Hole Punch Set the default hole punch. None, Left, Top, Right None
60 - 64 60 Banner Sheet Set the page position in banner 
sheet.
zPrint Job via PC only (included 
MCP/DPS)
zBanner Sheet will not be 
finished (Sort, Staple, Punch)
zBanner Sheet will be counted 
with 1 count of monochrome 
image.
zPrint out orientation will be 
fixed according to the paper 
size.
Portrait : Ledger, Legal, Letter
Landscape : Invoice
zThis settings is available only 
from the machine setting.None, Top, Last, 
Top&LastNone
61 Banner Sheet Tray Set the banner sheet tray. Tray 1, Tray 2, Tray 3, 
Tray 4Tray 1
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting