Panasonic Digital Imaging Systems Dp 1810p Copier Operating Instructions

							11
For DP-1810P
Control Panel
LCD Display
Warning Indications
JAdd Paper
?Add Toner
IMisfeed
2Call Service
No Contents Refer to
2STOP KeyCStops the copy run.——
3START KeyCUsed to start an operation.——
4INTERRUPT Key, MEMORY IN Key, M1/M2 Keys
CInterrupt Key interrupts other copy or print jobs while making copies.
CMemory In Key registers two copy jobs for recall at a later time.
C
M1/M2 Keys are used to store a Job in Memory or to recall a Job stores in Memory.
Pages 22, 24
5Cursor Keys
C CC C
CSelect copy ratio and function modes using (G or F).
——
6PAPER TRAY  Key
C CC C
CUsed to select the paper tray manually.——
7COPY SIZE Key
C
Used to select Reduction/Enlargement only. For additional details, see page 13.——
8ORIGINAL SIZE Key
C
Used to select the original size manually. For additional details, see page 13.——
9PRINT Key
C CC C
CWhen selecting the Printer ON/OFF Line.——
NOTECThe Control Panel displayed above shows only copier functions. Please refer
to the appropriate operating instructions for other control panel functions or in
the Panasonic Document Management System CD-ROM for the Printer
control panel functions.
Before Starting
:2-Sided/1-Sided Copy Key
C Used to select 1 \ 2, 2 \ 2 and 2 \ 1, Book \ 2 copying—— 
						

							12
Basic Copy
Full Size Copying

 

 


Copying the Same Size Originals (1:1)
Copy size is automatically selected.
1
Place the Original
LCD Display (Sample)ORIGINAL SIZE Key
Select the Original Size on units
without the ADF/i-ADF Option.
NOTE
CLEAR Key
2
Number of Copies*
Up to 999
3
Press START**
#Select the Original Type
PHOTO : Originals are mainly composed of photo.
TEXT/PHOTO : Combined originals with text and photo.
TEXT : Originals are mainly composed of text.
$Select Exposure Control
Press the DARKER/LIGHTER keys to adjust the exposure.

 

 


Manually Selecting Exposure Control or Original Type
∗Use Clear key when canceling the copy count.
∗∗While the copier is warming up, you may position your original on the copier, enter
your copy job selections and press the Start key. The COPY JOB RESERVED
indicator displays until the warm up cycle is completed and the copy job is
automatically started.
READY TO COPY
        COPIES:001 
						

							13

 

 


Copying with Preset Ratios
Basic Copy
100 77 65 50
121 100 79 61
129 100 100 65
200 155 129 100
Reduction or Enlargement Copying
LDR ->LTRB  [LTRB ]
ZOOM: 65% COPIES:001
RESET
Making Copies
1
Place the
Original
2
Select the
ORIGINAL SIZE
3
Select the COPY
SIZE
4
Number of
Copies
CIf the desired copy size is different from the paper size loaded in the paper
tray, use the sheet bypass. (See page 15)
CPress the RESET key to cancel all job settings.
5
Press
START
Example: Reduction
Original size Copy size
LEDGERLETTER
The correct ratio is automatically selected.
Reduction and enlargement ratios (%)
Original
SizeCopy Size
Ledger Legal Letter Invoice
Ledger
Legal
Letter
Invoice
CWhen changing the paper tray, press the
Paper Tray key.
NOTE 
						

							14
NOTE
ATTENTION

 

 


Zoom
Copies with variable zoom ratios from 50 % to 200 % in 1 % increments.
LTR  ->LTRB  [LTRB ]
ZOOM:125% COPIES:001B
RESET
Zoom Copying Basic Copy
(Example: 125 % Zoom)
1
Place the
Original
2
Press Cursor (G or F)
keys to select Zoom Ratio
4
Number
of Copies
5
Press
START
CWhen changing the paper size after setting the zoom ratio, please use the paper tray
key.
CPress the RESET key to cancel all job settings.
3
Select ORIGINAL
SIZE
(without using
ADF/i-ADF) 
						

							15
NOTE
ATTENTION
Sheet
Bypass
#Place the sheets of paper into
the tray. (approximately up to
50 Letter size sheets/20 lb)
Basic Copy
Using the Sheet Bypass

 

 


Copying on Special Paper, etc.
1
Place the original.
Open the sheet bypass.
2
Pull out the sheet bypass tray
until it stops.
(For Ledger size only)
3
Insert the paper until it stops.
$Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
Press START.
Side Guides
CAdjust the side guides properly to avoid skewing, wrinkling or misfeeding. CDo not feed curled paper through the sheet bypass to avoid misfeed.Do not fill above.
Making Copies 
						

							16
2 in 1 Copy

2 in 1 Copy
From two 1-Sided originals, side by side, to 1-Sided pages.
Creative Features
1 \ 2 (Layout)*
2 \ 1 (Layout)*
Portrait (Orientation)*
Landscape (Orientation)*
1 \ 2 (Layout)*
2 \ 1 (Layout)*
4
Number of
Copies

 

 


Procedure
ADF/i-ADF
Face-Up
1
Place the
Originals
2
Press 2
in 1 key
(3)
COPY SIZE
(Reduction/
Enlargement
Only)
5
Press
START
CThe ADF/i-ADF is required for 2 in 1 copy.
CPress the RESET key to cancel all job settings.
CNumbers in parenthesis “ ( ) ” represent that, an additional step is required to
activate the feature.
∗The Orientation and Layout can be set in the Copier Settings function mode.
(See page 30)
NOTE 
						

							17
NOTECTo reset all job settings, press the RESET key.
3
ORIGINAL SIZE
(Letter or Ledger
size Only)
4
Number of
Copies
5
Press
START
PlatenLedger size original
LetterBook Mark

2 PAGE Copy
Copying two facing pages on a ledger size original on two separate Letter size sheets.

 

 


Procedure
1
Place the
Originals
2
Press the 2
PAGE COPY
key
2 PAGE COPYCreative Features
Making Copies
Center book
by length
and width
according
to center
marks. 
						

							18
NOTE
BOOK/EDGE/MARGIN Creative Features

BOOK Key
Eliminates dark inner binding shadows when copying from a book.

EDGE Key
Creates a blank edge.

MARGIN Key
Shifts the image to the right or left.

 

 


Procedure
∗Initial setting (Factory setting) can be changed in the Copier Settings function mode.
(See page 30)
∗∗If a part of the copied image is missing when using the Margin mode, change the
Frame Reduction setting to ON.
(See page 30)
CPress the RESET key to cancel all job settings. Book
∗Initial Book Margin setting (Factory setting): 20 mm
∗Initial Equal Rate setting (Factory setting): 5 mm
∗Initial Left Margin setting (Factory setting): 10 mm Edge
Margin
**
1
Place the
Original
2
Press BOOK, EDGE
or MARGIN key
5
Press
START
4
Number
of Copies
BOOK MARGIN
CENTER VOID = 20mm∨∧
EQUAL RATE
VOID MARGIN = 5mm∧
LEFT MARGIN
              10mm∨∧
3
Press Cursor (G or F) keys to adjust
the void width while the button is
blinking. (approx. 5 sec.)
CVoid/Margin width: 5-99 mm 
						

							19
2-Sided/1-Sided Copy (For DP-2010E)Creative Features

 

 


Key Operation
Press 2-Sided/1-Sided Copy key (circulation) to select a 2-Sided/1-Sided Copy function.
1 \ 2From 1-Sided originals to 2-Sided
copies.(See page 20)
2 \ 2From 2-Sided originals to 2-Sided
copies.(See page 20)
Book \ 2From book originals to 2-Sided copies. (See page 21)
2 \ 1From 2-Sided originals to 1-Sided
copies.(See page 20)
NOTE
2-Sided/1-Sided Copy key
C2-Sided originals may be handled either manually or automatically using the
i-ADF (DA-AR201).
C2-Sided/1-Sided Copy function is only available for DP-2010E.
Making Copies 
						

							20
1 
\ \\ \
\ 2  /  2 
\ \\ \
\1  /  2 
\ \\ \
\ 2 Copy (For DP-2010E)

1 
\ \\ \
\ 2 Copy
From 1-Sided originals to
2-Sided copies.
(From Copier Platen & i-ADF/
ADF)
2 
\ \\ \
\ 1 Copy
From 2-Sided originals to
1-Sided copies.
(Using i-ADF)
Creative Features
NOTE

2 
\ \\ \
\ 2 Copy
From 2-Sided originals to
2-Sided copies.
(Using i-ADF)
Long Edge (Binding)*Long Edge (Binding)*Long Edge (Binding)
Short Edge (Binding)
*Short Edge (Binding)*Short Edge (Binding)

 

 


Procedure
i-ADF
Face-Up
1
Place the
Originals
2
Press 2-Sided/
1-Sided Copy key
(circulation) to
select 1 \ 2, 2 \ 2
or 2 \ 1Number of
Copies
(3)
COPY SIZE
(Reduction/
Enlargement Only)
45
Press
START
CTo reset each selection, press the RESET key.
∗The initial setting of binding location for 1 \ 2 Copy and 2 \ 1 Copy (Long edge or
Short edge) can be set in function mode. (See page 30)
C1 \ 2, 2 \ 2, 2 \ 1 Copy function is only available for DP-2010E.
(When selecting 1 \ 2 Copy or 2 \ 1 Copy)
BINDING:LONG EDGE
PRESS < > TO SELECTPress the I or H key to select
the binding location.