Home
>
Panasonic
>
Copier
>
Panasonic Digital Imaging Systems Dp 1810p Copier Operating Instructions
Panasonic Digital Imaging Systems Dp 1810p Copier Operating Instructions
Have a look at the manual Panasonic Digital Imaging Systems Dp 1810p Copier Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Function General Functions for Key Operator No. ModesInitial Setting Function NOTE Selects the Control Panel reset time. COFF, 30 sec, 1 min., 2 min., 3 min., 4 min. Selects the message language of the display. CA-ENGLISH, C-FRENCH, SPANISH AUTO RESET TIME LANGUAGE DEFAULT 05 Sets the paper tray for special paper (ex: colored). CNONE, TRAY 1, TRAY 2, BYPASS SPECIAL TRAY 1NONE Sets the Energy Saver mode and time. CINVALID, ENERGY-SAVER, SLEEP Energy save mode timer : 1-120 minutes Sleep mode timer : 1-120 minutes ENERGY SAVER MODE 1 min. SLEEP A-ENGLISH KEY/TOUCH BEEPSets the panel touch sound. COFF, SOFT, LOUDSOFT 01 02 04 09 Consult your service technician. Monitors copy usage of each department. (1) TOTAL COUNTER (2) DEPT. COUNTER (3) DEPT. COUNTER LISTDEPT. COUNTER MODE ∗Sets the IP Address assigned to your machine. C3 digit × 4 (Use the MEMORY IN key to enter the “.” between each set of 3-digit numbers) TCP/IP ADDRESS ∗Sets the Subnet Mask. C3 digit × 4 (Use the MEMORY IN key to enter the “.” between each set of 3-digit numbers) TCP/IP SUBNET MSK ∗Sets the Subnet Mask. C3 digit × 4 (Use the MEMORY IN key to enter the “.” between each set of 3-digit numbers) TCP/IP G/W ADDR. 14 22 23 24 CIt is necessary to input the Key Operator ID code before changing items on this page. CThe Special Tray 1 and 2 are not auto-selectable in the switching mode. ∗Not available for plain copier, but will be available when installing options with advanced functions. (See page 57) Sets the paper tray for special paper. CNONE, TRAY 1, TRAY 2, BYPASS SPECIAL TRAY 2 NONE 06 Sets the sound when put paper(s) on bypass tray. C1: INVALID 2: VALID BYPASS SET BEEP INVALID 10 Sets the sound when put paper(s) on ADF. C1: INVALID 2: VALID ORIG. SET BEEP ADF VALID 11 Prints list containing Current Setting and Standard Setting. COPY SETTING LIST 25 Contact your Network Adminstrator. Contact your Network Adminstrator. Contact your Network Adminstrator. Making Copies Total print out volume from the main unit. TOTAL COUNT 15 Total print out volume from the PC. PC PRINT COUNT 16Sets the paper size of each paper tray. CTray-1, Tray-2, Tray-3, Tray-4 PAPER SIZE Consult your service technician.00
32 NOTE No. ModesInitial Setting Function Function Copier Settings for Key Operator ORIGINAL (HOME) Selects contrast for Text/Photo mode C1 ~ 5 T/P CONTRAST 3 PHOTO CONTRAST Selects contrast for Photo mode C1 ~ 5T/P ( Text/Photo) Selects original setting CTEXT, T/P (Text/Photo), PHOTO 3 Selects contrast for Text mode C1 ~ 5 TEXT CONTRAST 3 MAX. COPY SETTING Determines whether to limit number of copies C1 ~ 999999 01 02 03 04 10 Input a size in memory 2 for frequent usage size. CX: 5~432/Y: 5~297 mm (See page 22) M2, SIZE95×220 mm (X) (Y) 70×160 mm (X) (Y)Input a size in memory 1 for frequent usage size. CX: 5~432/Y: 5~297 mm (See page 22) M1, SIZE 16 MEM. FULL ACTION Selects the memory full action CPRINT, CANCELPrint 12 13 CIt is necessary to input the Key Operator ID code before changing items on this page.
33 Making Copies Function Setting Changing the Auto Exposure Setting You can select whether the copying density is adjusted automatically for text and photographic originals. 1 FUNCTION Key 2#Press the 2 key to select COPIER SETTINGS. $Press the SET key. %Press 8 and SET key to select AUTO EXPOSURE MODE. &Press 1 or 2 key to select whether Auto Exposure is to be carried out or not. (Press the SET key to set up the AUTO EXPOSURE MODE. )Press the RESET key to exit the Function mode. Function Proceed as Follows: FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧ COPIER PARAM. (00-14) ENTER NO. OR ∨ ∧ 2:COPIER SETTINGS PRESS SET TO SELECT 08 AUTO EXPOSURE 2:VALID Press the FUNCTION key.
34 Function Setting for Key Operator Changing the Paper Size The Paper Trays are designed to accommodate Invoice, Letter, Letter R, Legal and Ledger size paper. To change the paper size, perform the steps shown below. 1 FUNCTION Key 2 Proceed as Follows: #Press the 1 key to select GENERAL FUNCTIONS. $Press the SET key. %Press 9 key. &Input the Key Operator ID code (3 digit) and the SET key.(Press 00 and 1 or 2 key to select the PAPER SIZE. )Press SET to select the paper tray and press (G or F) keys to set the paper size. Paper size changes are as follows. Letter R Invoice R Ledger Legal *Press the SET key to set up the PAPER SIZE. +Press the RESET key to exit the Function mode. Function FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧ 1:GENERAL FUNCTIONS PRESS SET TO SELECT GENERAL PARAM. (0-9) ENTER NO. OR ∨ ∧ 09 KEY OPERATOR MODE ENTER PASSWORD=- KEY OPR. MODE (00-25) ENTER NO. OR ∨ ∧ 00 PAPER SIZE 1:TRAY-1[LTR B] LetterA3 B4 A4 A4R B5 FLS2 FLS1 A5R B5R Press the FUNCTION key.
35 NOTE Function Changing the Paper Guide and Paper Size Indicator in the Paper Tray #Pull the Paper Tray out and remove paper. $Adjust the paper guide a to the required paper length. %Adjust the Paper Guide b to the required paper width. Pinch the stopper to move the Paper Guide b. &Change the Paper Size Indicator. Paper Guide a aa a a Stopper Paper Guide b bb b b Size Indicator (Close the Paper Tray. 3 CIt is recommended that the paper guide b be fixed in place with screws. Consult an authorized servicing dealer for details on how to fasten with screws. Function Setting for Key Operator Making Copies
36 Department Counter The Key Operator can manage, limit copies, counters and code numbers for each department. (Maximum department counters: 50) 1 FUNCTION Key 2 Proceed as Follows: #Press the 1 key to select GENERAL FUNCTIONS. $Press the SET key. %Press 9 key.&Press the Key Operator ID code (3 digit) and SET key. (Press 14 and the SET key to select DEPT. COUNTER MODE. NOTECTo reset the function mode, press the RESET key. C Contact your authorized servicing dealer to enable the Department Counter feature. Function Setting for Key Operator Function FUNCTION MODE (1-2) ENTER NO. OR ∨ ∧ 1:GENERAL FUNCTIONS PRESS SET TO SELECT GENERAL PARAM. (0-9) ENTER NO. OR ∨ ∧ 09 KEY OPERATOR MODE ENTER PASSWORD=- KEY OPR. MODE (00-25) ENTER NO. OR ∨ ∧ Press the FUNCTION key.
37 Making Copies Change the Department ID Code, limit the maximum number of copies and Department Counter number. #Press the Keypad and the SET key to input the Department ID Code. 01: 1234 Department ID Code Department No. $Press the Keypad and the SET key to input the maximun number of copies. 01: 123456 Maximun number of copies (6 digits) Department No. %Press the Keypad and the SET key (G or F keys) to select the Department No. 01: 123456 Counter (6 digits) Department No. &Press 0 and the SET key (Input “0”) to clear the counter. DEPT.COUNTER MODE 1:TOTAL COUNTER 3 Select the Department Counter Mode. Press 2 and the SET key. NOTE Function CTo reset the function mode, press the RESET key. DEPT. CODE (01-50) ENTER NO. OR ∨ ∧ DEPT.COUNTER 01:123456 MAX COPIES 01:123456 ID CODE 01:1234 4 Function Setting for Key Operator
39 DP-2010E with OptionsDP-1810P with Options Accessories Components ADF (Automatic Document Feeder) (DA-AS180) CFeeds originals automatically. C2 in 1 Copy ADF Zoom Copy 2 in 1 Copy 2 Page Copy Book Edge Margin Non-Sort Sort Sort-RotateManual Skyshot Image Memory (DA-SM08B/SM16B/SM64B/SM28B) C8/16/64/128 MB CTo increase the memory capacity for electronic sorting and sort printing. 2nd/4th Paper Feed Module (DA-DS182) CTo increase the paper feed sources and capacity. Paper Feed Module × 1 (550 sheets) ∗PCL6 is a Page Description Language of the Hewlett-Packard Company. CThe table below shows the options which are required for various functions. C Contact your authorized servicing dealer for details on combinations of options. 2-ORIGINAL H COPYMargin SORTOther FunctionsFunction Options i-ADF :Required NOTE PCL6 Emulation Kit (DA-PC210) CPrinter Controller for PCL6 * 10/100 Ethernet Interface/ Internet Fax Kit (DA-NE200) CNetwork Interface Board Options i-ADF (Inverting Automatic Document Feeder) (DA-AR201) CFeeds original automatically CDuplexing C2:1 Copy C2 in 1 Copy 3rd Paper Feed Module (DA-DS183) CTo increase the paper feed sources and capacity. Paper Feed Module × 1 (550 sheets) 1 \ 2 2 \ 2 Book \ 2 2 \ 1 2nd/3rd/4th Paper Feed Module
40 ADF (DA-AS180) / i-ADF (DA-AR201) 1. Features #Automatic Original Feeding CThe ADF/i-ADF tray can hold up to 50 Letter size originals of 20 lb (80 g/m2) paper (up to 30 Legal or Ledger size originals). It can accommodate from Invoice to Ledger size originals. CAutomatic original size detection. $2 in 1 Copy CTo make a 1-Sided copy (full size or reduction), from two 1-Sided originals side-by-side. %Duplex Copying (DA-AR201) CThe i-ADF allows you to copy 2-sided originals either manually or automatically. Accessories 2. Components Original Guides Adjust to the original’s width ADF Tray Automatic Document Feeder CSet the originals up to the upper limit arrow. ADF (DA-AS180) Original Guides Adjust to the original’s width i-ADF Tray i-ADF (DA-AR201)