Panasonic Digital Imaging Systems DP-2310/3010/3510/4510/6010 Operating Instructions

Basic Transmission Settings
21
Before Starting
Your machine is preset to Standard resolution, which is suitable for most documents.
Use Fine or Super Fine for detailed documents. 
NOTE1. To change the preset Contrast position, change the setting of Fax Parameter No. 01.
 (See page 192) 
2. To change the preset Resolution position, change the setting of Fax Parameter No. 02.
 (See page 192)
3. If you send a photographic original with gray tones, set the Resolution to Fine or S-Fine (406 x 
391 dpi) and...

Basic Transmission Settings
22
The Original setting is useful when sending photographs or illustrations with gray tones.  Your machine is
preset to TEXT.  You can select either TEXT/PHOTO or PHOTO mode.
NOTE1. When you select TEXT/PHOTO, or PHOTO, you machine will automatically select Fine 
Resolution.
2. When you store a document in memory, the Verification Stamp will stamp on the document if it 
is successfully stored in memory.  In this case the Verification Stamp is not a confirmation that 
the...

23
Before Starting
Sending Documents
1a
Place original(s) face up on the ADF.
or
1b
Place a book or an original face down on the 
Platen Glass.
Press   to select the 
original size.
2
Press  Key.
3
Select the Mode(s)
Set  the SEND MODE or desired 
Parameter(s), if necessary.
(See page 20)
• Resolution
• Send Mode
• 2-SIDED ORIGINAL
•X-STAMP
•File Format
 (DP-2310/3010 only)
3
452
1
Stop Ke y Clear Ke y
Place original(s)Press the
FAX/EMAIL Key          Press the 
MODE
SETTING
 ButtonSelect the SEND MODE...

Sending Documents
24
NOTE1. To utilize the above functions, your machine needs to be setup properly on your network.
Please contact your network administrator for actual network setup.
2. You can register the entered dialing number into the Address Book by pressing the
   in Step 4. 
4
Select either ADDRESS BOOK DIALING 
or MANUAL NUMBER DIALING.
1. ADDRESS BOOK DIALING
Telephone numbers or Email 
addresses should be registered in 
advance. (See page 182)
2. MANUAL NUMBER DIALING
Facsimile: Enter the...

Sending Documents
25
Before Starting
When a book or an original is placed on the Platen Glass, the message ANOTHER ORIGINAL? is shown
on the LCD display when   is pressed and the scanning is completed.
• If you wish to store another page, press   and place another original, then press  .
• If   is pressed, the machine starts to dial the telephone number.
You can search and edit an Address Book entry as follows.
Flatbed Scanning
Searching and Editing the Address Book
  Search the directory using the Local...

Sending Documents
26
Searching and Editing the Address Book

 EMAIL HEADER
  Select the input item and press OK.
 Confirm the destinations.
 Enter the subject.Ex:Entering the Email address 
into the TO: field
1. Press   and the   
buttons, then enter the 
Email address.
2. Confirm the destinations.

 DESTINATIONS
  Select the address tab.
 Edit the email address when using manual number dialing.
 Delete the selected address.
EMAIL HEADER
Select A Function
1
2
3
TOOK
Confirm Destinations
Check And Press...

27
Facsimile
Features
 Facsimile Features
Sending Documents
You can choose either Memory or Direct Transmission.
Use Memory Transmission if:
• You want to send the document(s) to multiple stations.
• You have to retrieve the document immediately.
• You want to take advantage of Multi-access design.
• You want to take advantage of Batch Transmission.
Use Direct Transmission if:
• The memory is full.
• You want to send the document(s) immediately.
Use Voice Mode Transmission if:
• You want to send the...

Sending Documents
28
Memory Transmission
2. If memory overflow occurs while storing the document(s), the page will be ejected. The
machine will show MEMORY FULL on the display. You will need to reload the last page that
was ejected back on the ADF and send the remaining document(s) again when the memory
becomes available.
If Fax Parameter No. 082 (Quick Memory XMT) is set to Invalid, the machine stores all the
documents into memory first before transmitting. 
After storing each document, the machine...

Sending Documents
29
Facsimile
Features
Letter or A4 Original(s) are placed in a Portrait ( ) direction, the document(s) will be rotated by 90º and
then transmitted in a Landscape ( ) direction. The document(s) will be printed the same size as the
transmitted originals at the Receiving Station.
Rotation XMT Fax Parameter No. 078 (ROTATION XMT) set to:
•Invalid
•Valid (Default Position)
This machine has duplex SCAN & PRINT capabilities.
Duplex Scan 2-Sided Original on the Basic Menu:
•2-Sided Original =...

Sending Documents
30
On-Hook Dialing
For On-Hook Dialing, follow the steps below.
NOTE1. If you need a special access number to get an outside line, dial it first then press   to
enter a pause (represented by a -) before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press   (represented by a /).
The dialing mode will be changed from Pulse to Tone after dialing the digit /.
Ex: 9 PAUSE TONE 5551234...