Panasonic Directv Digital Satellite Receiver Tzdbs01 Operating Instructions

							20
GETTING STARTED
Step 1e. Digital Satellite Receiver Connection to VCR
Follow this diagram when connecting the Digital Satellite Receiver to a standard VCR. 
Procedure
• Connect video cable from the video output jack on the Digital Satellite Receiver to the video
input jack on the VCR.
• Connect audio cables from the left and right audio output jacks on the Digital Satellite
Receiver to the left and right audio input jacks on the VCR.
• Connect video cable from video output jack on the VCR to video input jack on TV. 
• Connect the audio out cables from the audio output jacks on the VCR to the audio input
jacks on the TV.
To record off-air programming
• Turn off satellite receiver or press TV/SAT button to toggle. Tune the VCR to desired
channel and push record button on the VCR to start recording
Note: This Digital Satellite Receiver incorporates an anticopy process technology that
is protected by U.S. patents and other intellectual property rights measures. The
anticopy process is licensed for non-commercial, home use only. Reverse
engineering or disassembly is prohibited.
SATELLI TE
IN
TEL LINER- AUDI O- L VI DEO
NTSC OUTPUT
AC IN VHF/ UHF
INVHF ( SAT)  / UHF
OUT
R- AUDI O- L VI DEO
ANT I N
R- AUDI O- L VI DEO
VI DEO I N VI DEO OUTANT OUTANT I N
TV
VCR
DIGITAL SATELLITE RECEIVER
Incomi ng Si gnal  from antenna or cabl e
VCR SETUP
NOTE: A/V CABLES AND MODEM
CABLE INCLUDED. 
						

							21
GETTING STARTED
Step 2. Turning Digital Satellite Receiver On
Procedure
• Press the Remote Control SAT mode button .
• Press the POWER button.
Note:Monitor/TV should also be turned on.
Step 3. Roller Guide Menu™
Press the MENU button to display the Roller Guide Menu*.  Press the   or  arrow
on the ACTION button to rotate the Roller Guide.  Press the   arrow on the ACTION
button to exit the Roller Guide Menu. 
Note:To exit the Roller Guide Menu, press the   arrow on the ACTION button, press the
MENU button or press the EXIT button on the remote control.
Step 3a. ACTION / Navigation Button
Press ACTION to select the Roller Guide Menu item. Press the   or   arrows to
highlight sub menus.  Press the   arrow to select features.  Press the   or   arrows
to scroll through options within a feature.  Press the  arrow to return to main menu
items. 
Remote ACTION / Navigation Button
 SA
T
Panasonic
ROLLER GUIDE MENU SELECTIONS
pq for more features
Press ACTION to enter.
CH
CH 
						

							22
REMOTE CONTROL
 
PROG (Program) / MUTE
Press to enter the 2-digit minor 
number in a compound channel 
number.
Press to mute TV audio.
Remote Control
GUIDE
Press to select STB Guide or DVD
menu.
TV/SAT TV/VCR
Press to select VIDEO inputs in TV
mode.
Press to switch between TV and SAT
in SAT mode or to switch between
TV and VCR in VCR mode.
SAT VCR  DVD TV 
Press to select remote operation
mode.
CH / PAGE
Press to select Page up/down,
next/previous channel or
Slow+ / Slow- 
R-TUNE/JUMP
Press to switch to previously
viewed channel or program.
Press to skip (jump) the Guide 24
hours ahead.
“0” ~ “9”
Press numeric keypad to select
any channel.
ACTION
Press to access sub menus or 
display Main Menus. 
Press to activate wink enabled 
transactions (available in the 
future).
MENU 
Press to access Roller Guide
Menu.
POWER
Press to turn ON and OFF.
EUR511515
EXIT
Press to exit SAT Guide or DVD
menu.
INFO
Press to display time, channel
banner, and other options. 
						

							23
REMOTE CONTROL FUNCTIONAL KEY CHART  Remote Control Functional Key Chart
KeyComponentFunction
ALL COMPONENTSTurn components On and Off 
ALL COMPONENTSComponent mode selection for
Remote Control
TV  SAT VCR DVD
                                                                                                                                                       
Channel up/down
Up navigation
Down navigation
Left and right navigation
Exit Roller Guide Menu
Select and adjust features
Select audio tracks
TV 
SAT
DVDRoller Guide Menu
Main menu selections
Select 
Activates wink enabled transac-
tions (available in the future)
MENU  SAT
DVD TVRoller Guide Menu 
Menu
INFO TV  VCR  DVD 
SATOn screen display
SAT Program Info
EXIT             SAT Exit Menus 
GUIDE             SAT Guide 
R-TUNE/JUMPTV SAT
SAT
DVDPrevious channel
Skips the GUIDE 24 hours ahead
Title
PROG/MUTESAT
TV  VCR DVD
 
Press to enter the 2- digit minor
number in a compound number.
Mute TV audio
 RECVCR Record
POWER
 VC
R 
DVD 
TVSA
T
CH
CH
CH CH
AUDIOTRACK
/ VOLAUDIOTRACK
/ VOL
ACTION 
						

							24
REMOTE CONTROL FUNCTIONAL KEY CHART
Battery Installation
Incorrect installation can cause battery leakage and corrosion that will damage the
Remote Control.
Use two AA batteries:
Remove the battery cover by pushing in near the arrow and sliding the cover
back.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon with alkaline).
• Do not recharge, short-circuit, heat, burn, or disassemble batteries.
REW
DVD 
VCRSkip / Search Rewind
Rewind 
PLAY
VCR  DVD Play
FFDVD
VCRSkip/Search Fast Forward
Fast Forward
STOPVCR DVDStop
TV / SAT
TV / VCRTV
SAT
VCRSelects Video inputs
Switch between TV and SAT
Switch between TV and VCR
PAUSEDVD
VCRStill / Pause
Pause
CH / PAGESAT
VCR
DVDPage up/down
Channel up / down
Slow +/-
TV SAT VCR DVD 
CD Selects channel number
Selects code
Selects track
 Remote Control Functional Key Chart
KeyComponentFunction
u
pq
7
123
456
98
0 
						

							25
SPECIAL REMOTE BUTTONS
Special Remote Buttons
MENU button
The MENU button is used to enter and exit the Roller Guide Menu system. Each time
the MENU button is pressed, the Roller Guide will appear on and disappear from the
viewing screen.
INFO button
The INFO button lets you view Satellite program display and other on-screen displays
when you are in TV, VCR or DVD operating modes.
GUIDE button
The GUIDE button lets you bring up the Satellite guide.
TV/SAT / TV/VCR button
The TV/SAT button lets you switch between TV and satellite programming.
The TV/VCR button lets you switch between TV and VCR programming.
While in TV mode, this button lets you select TV video inputs.
R-TUNE/JUMP button
In TV or SAT mode, the R-TUNE/JUMP button quickly switches between two
channels or programs. 
If you press this button while viewing the Program Guide, the Guide will skip 24 hours
ahead. Each time you press this button, the Guide will jump 1 day ahead. You can
jump (skip ahead) the Guide three times. At the fourth try, the Guide will display the
original screen.
In DVD mode it will let you select titles.
PROG/MUTE button
In TV, VCR or DVD mode, the PROG/MUTE button mutes the audio.
In SAT mode, press the PROG/MUTE button to enter the 2 digit minor number in a
compound number.
CH/PAGE button
In SAT mode, press PA G E p or PA G E q button to scroll up or down through the
Program Guide quickly.
In TV or VCR mode, press to change channels.
MENU
INFO
GUIDE
TV/VCR
TV/SAT
R-TUNE/JUMP
PROG/MUTE
pq
CH / PAGE 
						

							26
PROGRAMMING THE REMOTE CONTROL
Programming the Remote Control
The Universal Remote Control can be programmed to operate many manufacturers’
components using the component function buttons for TV, VCR, DVD. Follow the
procedures for programming your Remote Control with and without codes for the
component.  Determine the manufacturer of the component and look in the table for
the code. 
Programming With Code
• Confirm that the external component is plugged in and is turned on.
• Turn the component off.
• Press the ACTION and POWER button, together, for at least 5 seconds and
then let go of the buttons.
• Press appropriate component button (TV, VCR, DVD) on the Remote Control. 
• Enter the 3-digit component code using the Remote Control numeric keypad
(0 ~ 9 buttons). If a proper code was entered, the mode button will blink twice
and go out.
• Press the Remote Control POWER button to test the component. If the
procedure was successful, the component will turn on.
Programming Without Code
This procedure searches all codes and is called the “sequence method”.
• Confirm that the external component is plugged in and is turned on.
• Turn the component off.
• Press the ACTION and POWER button, together, for at least 5 seconds, and
then let go of the buttons.
• Press appropriate component button on the Remote Control. 
• Press the   button to move forward to the next code. Press the   button to
move backward.
• Press the Remote Control POWER button to test the component. If the
procedure was successful, the component will turn on.
Note:Repeat the preceding two steps until the component code is found. It may take many attempts
before the correct code is found.
• After the code is found, press the ACTION button to store the code.
Unsuccessful Code
If the component does not operate with the Remote Control, 
repeat the procedure using another code. (Some brands have 
multiple codes.)
If an incorrect code is entered, or if the procedure takes longer 
than 30 seconds, the programming will fail. 
						

							27
COMPONENT CODES
BrandCode
Akai104
Centurion104
Daewoo104, 106
Emerson104, 108, 109, 110, 120
Fisher111
GE/Panasonic/
Quasar101
GE/RCA11 2
Hitachi11 3
JVC11 4
Magnavox104, 115, 116
Marantz11 7
Panasonic100, 101, 102
Pioneer101, 107, 118
Proscan104, 112, 119
Quasar101, 103
Radioshack104, 112, 117, 120
RCA104, 112, 119, 121, 122
Samsung104, 123
Sears/Toshiba104, 107, 111, 112, 115
Sharp120, 124
Sony125
Zenith/Inteq126, 127
BrandCode
Component Codes
The Universal Remote Control is capable of operating many component brands after entering a code.
Some components may not operate because memory is limited.  The Universal Remote Control does not
control all features in all models.
Codes for TV
Codes for DVD
BrandCode
Denon100
Ferguson101
JVC108, 109
Mitsubishi105
Nordmende101
Panasonic100
Philips103
Pioneer102
RCA101
Saba101
Samsung11 0
Sharp108
Sony104
Thomson101
Toshiba103
Yamaha100
Zenith107
BrandCode
Write the code numbers for your components in the space provided below. This will serve as a reference
when you need to reprogram your remote control.
Te l e v i s i o n V C RDVD 
						

							28
COMPONENT CODES
BrandCode
Admiral135
Aiwa132
Akai129, 114, 115, 116
Audio Dynamic111, 139
Bell & Howell105, 113
Broksonic120, 126
Canon123, 125
CCE143
Citizen106
Craig105, 106, 129
Curtis Mathes124, 127, 145
Daewoo 101, 124, 143
DBX110, 111, 139
Dimensia145
Emerson103, 118, 119, 120, 125, 126, 141, 143
Fisher105, 107, 108, 109, 113
Funai120, 126, 127, 134
GE124, 133, 145
Go Video137, 149, 150, 151
Goldstar106
Gradiente134
Hitachi100, 123, 127, 145
Instant Replay123, 124
Jensen139
JVC110, 111, 134, 139
Kenwood106, 110, 111, 139 
LXI100, 105, 106, 107, 108, 109, 127
Magnavox123, 124, 131
Marantz110, 111, 139
Marta106
Memorex109, 124
MGA138, 140, 141, 147, 148
Minolta100,145
Mitsubishi138, 140, 141, 147, 148
Multitech104, 127, 147
NEC110, 111, 134, 139
Olympic123, 124
Optimus106, 121, 128, 135
Orion120, 126
Panasonic121, 122, 123, 124
Penney100, 105, 110, 111, 124, 139, 145
Pentax100, 111, 145
Philco120, 123, 124, 126, 127, 131
Philips123, 124, 131, 173
Pioneer123
Proscan100, 101, 102, 123,124, 131, 133, 145, 
146
Quasar121, 122, 123, 124
Radio Shack105, 109, 124, 127, 133, 136, 140
RCA100, 102, 123,124, 131, 133, 145, 146
Realistic105, 109, 124, 127, 136, 140
Samsung102, 104, 133, 137
Sansui120, 126, 139, 152
Sanyo105, 109, 113
Scott102, 104, 109, 120, 126, 138, 140, 
147, 148
Sears100, 105, 106, 107, 108
Sharp135, 136
Shintom11 7
Signature 2000127, 135
Singer11 7
Sony128, 129, 130
SV2000127
Sylvania123, 124, 127, 131
Symphonic127
Tashiro106
Tatung11 0 ,  111 ,  1 3 9
Teac110, 111, 127, 139
Technics121, 122,123, 124
Teknica112, 124, 127
Toshiba146
Vector 
Research111
Yamaha105, 110, 111, 139
Wards106, 109, 135, 136, 144
Zenith106, 144
BrandCode
Codes for VCR 
						

							29
SPECIAL FEATURES OF DIGITAL SATELLITE RECEIVER
Special Features of Digital Satellite Receiver
Impulse Pay Per View (IPPV)
You must connect your phone line to the Digital Satellite Receiver to receive pay per
view (PPV) service offered by DIRECTV. Connecting the phone line permits you to
use the IPPV feature, which allows event purchases without calling a CSR (Customer
Service Representative). If you decide against connecting to your phone line, you
must call the CSR to purchase events, such as pay per view movies*. DIRECTV
refers to such CSR assisted purchases as OPPV (Order ahead pay per view). 
When OPPV or subscription authorization changes (e.g., customer cancels the movie
purchases), the Digital Satellite Receiver will reflect that change immediately. The
Digital Satellite Receiver will display a message, identifying the reason for the
authorization status change.
The Digital Satellite Receiver has the ability to allow you to purchase a PPV event
offered by DIRECTV. When the Digital Satellite Receiver is tuned to an IPPV channel,
(video may or may not be displayed, depending upon whether the PPV event has
started) the following message is displayed on the screen.
*An additional fee applies to all pay per view phone-in orders.
IPPV message with video in the background
Purchase available - Press ACTION for purchase information.