Panasonic Directv Digital Satellite Receiver Tzdbs01 Operating Instructions

							60
ROLLER GUIDE MENU OPERATIONS
Options : About
The About screen displays assorted information about the manufacturer, including the
following:
• Product Description
• Version
• Serial # number of the Digital Satellite Receiver
• Model #
Procedure
rPress MENU button to display the Rollerguide.
rPress pq buttons to highlight the OPTIONS Icon. 
rPress ACTION button to display the OPTIONS screen.
rPress pq buttons to highlight About. Information about the unit is displayed.
rPresstbutton twice to exit the Rollerguide menu.
Note:Your digital satellite receiver is able to receive upgrades or modifications to some of its
features and functions. These modifications will occur automatically, usually at times
when the receiver would likely be turned off. If your receiver is on when an upgrade or
modification is sent, you may experience a disruption in reception for a minute or two.
Your reception should return to normal after the modification is complete. Do not
unplug your receiver while an upgrade is in progress. Please consult the Upgrade
Menu to find a schedule of upgrades or modifications planned by DIRECTV.
Options: About Screen
Clock
Favorites
Upgrades
Features
About Panasonic DTV Digital Receiver.
Audio
About
Panasonic
                               
                DIRECTV
APG Digital Satellite Receiver
Version: Version 3.8
Serial # MR1 
Model # TZ-DBS01 
						

							61
ROLLER GUIDE MENU OPERATIONS
Options : Upgrades
This screen shows the past and present version of the software and any future
upgrades.
Procedure
rIn the Options menu, press por q button to highlight Upgrades. The software information
is displayed.
Options: Features
This screen shows the special features of the Digital Satellite Screen.
Procedure
rIn Options menu, press p orq button to highlight Features. Information regarding the
Digital Satellite Receiver is shown.Options: Upgrades Screen
Clock
Favorites
Upgrades
Features
Software upgrades information.
Audio
About
Software Revisions:
Original       3.8
Current 3.8
Future Upgrades:
None pending.
TZ-DBS01
Upgrade List
Clock
Favorites
Upgrades
Features
Receiver Feature List
Audio
About
TZ-DBS01 IRD
DIRECTV Multi-Set Advanced Features List
Advanced Program Guide
Options: Features Screen 
						

							62
ROLLER GUIDE MENU OPERATIONS
TIMER
This Digital Satellite Receiver contains eight timers that are capable of tuning the Digital
Satellite Receiver on and off at selected times, on selected channels and on selected
days. The timer options provide you an automatic way of controlling the Digital Satellite
Receiver when it is active. The options are the following:
• OFF (default state)
•ON 
Off state
The Off state disables the timer and clears the timer data fields.
On state
The On state enables the timer to perform several actions once a timer is active. The
Digital Satellite Receiver is turned ON and it is tuned to the specified channel. Once the
event has ended the Digital Satellite Receiver is turned OFF.
By leaving a timer in a ON mode, the Digital Satellite Receiver will tune to that channel
every week at that specified time and day. To turn off the timer, toggle the ON mode to
OFF.
Procedure
rPress MENU button to display the Rollerguide menu.
rPress pq buttons to highlight TIMER icon.
rPress ACTION button to display the TIMER menu.
rPress pq buttons to select the desired Timer.
rPressubutton to change TIMER settings.
rPress u button to enter the mode field.
rUse pq buttons to select the Mode OFF or ON.
rPress ACTION button to save your selection.
rPress q button to select Start (current day and time are shown).
rUse u and pq to select day, press u and pq to select hour and press u and pq to
select minutes.
rPress t to highlight Start and press q to select Stop and repeat procedure to set day,
hours and minutes.
rPress q button to highlight Channel. Use numeric keys on the remote control to enter
channel number. Press ACTION to enter your channel selection.
rPress qbutton to highlight Repeat.
rPress u button to highlight weekly or once.
rUse pq buttons to select the choices. 
rPress t button 3 times to exit the menu.
Timer 1
Timer 2
Timer 3
Timer 4
Timer 5
Timer 6
Timer 7
Timer 8
Mode
Star t
Sto p
Repeat
Channel
Off
u
Once
u
0-0
Channel Not Available
-- ---       --:-- --  
---       --:-- --  
Press 
u to change Timer 1 settings. 
						

							63
ROLLER GUIDE MENU OPERATIONS
TIMER (Cont.)
Note:All Data fields must be entered prior to setting the view mode. Timers cannot overlap
between the timers. The first entered timer will override the other timers. 
Timer Error Messages
The Digital Satellite Receiver will scan the timer data fields and notify you of any
problems before letting you set the viewing mode.
  TIMER Activation
The TIMER is active when the Digital Satellite
Receiver is OFF or ON.  The Digital Satellite
Receiver will switch to the selected channel at the
selected time set in the TIMER.
Timer Error Messages
Error ConditionError Message
The system time was not setNOTICE:  Clock must be set
One or more start time elements was not
enteredNOTICE: Start time must be entered.
One or more stop time elements was not
enteredNOTICE:  Stop time must be entered.
The channel number was not enteredNOTICE:  Ch number must be entered.
The day conflicts with the other timerNOTICE:  Day conflicts with Timer 2 (or 1)
The start time conflicts with the other timerNOTICE:  Start conflicts with Timer 2 (or 1)
The stop time conflicts with the other timerNOTICE:  Stop conflicts with Timer 2 (or 1)
The stop time conflicts with start timeNOTICE:  Stop conflicts with start time 
						

							64
GLOSSARY AND ACRONYMS
Glossary and Acronyms
APGAdvanced Program Guide™ the DIRECTV electronic program guide.
AT S CAdvanced Television Systems Committee. Standardization body that developed the
Digital Television Terrestrial formats.
CAMConditional access module, usually referred to as the access card. A removable,
electronic subassembly providing conditional access control of the subscriber
terminal.
CSRCustomer Service Representative
DIRECTVDIRECTV is a registered trademark of DIRECTV, Inc., a unit of Hughes Electronics 
Corporation.
DSTDaylight Saving Time
DTVDigital Television
IPPVImpulse pay per view. A method for ordering service on “impulse” where payments are
required for each program or special event independently.
LNBLow Noise Block downconverter. Portion of ODU that receives the satellite signal and
converts the signal into L-band frequency of 950-1450 MHz.
MPAAMotion Picture Association of America. Guild governing rating assignments to movies.
NTSCNational Television Systems Committee. Standardization body that developed the
Analog Television Terrestrial formats.
ODUOutdoor Satellite Dish Unit. The System that provides signal reception and down
conversion.
OPPVOrder Ahead pay per view. Movie purchases placed by calling a customer service
representative rather than using the on-screen displays. Necessary to purchase
movies when the subscriber does not connect the phone to the Digital Satellite
Receiver. 
						

							65
GLOSSARY AND ACRONYMS
OSDOn-screen display
PasswordA stored word a user must provide in order to perform a function.
SDStandard Definition
Smart CardCredit card sized microcomputer capable of securely storing service authorization and
system preferences such as pay per view lock. Also known as the CAM.
SubscriberCustomer of the DIRECTV Service
This product incorporates copyright protection technology that is protected by U.S.
patents and other intellectual property rights. Use of this copyright protection
technology must be authorized by Macrovision, and is intended for home and other
limited pay-per-view uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
U.S. Patent Nos. 6,020,880; 5,987,635; 5,926,573; 5,917,481; 5,874,995; 
5,819,035; 5,802,241; 5,737,019; 5,699,125; 5,650,825; 
5,623,311; 5,619,337; 5,583,574; 5,534,944; 5,532,748; 5,510,842;
5,502,493; 5,485,215; 5,477,397; 5,387,939; 5,367,334; 5,325,125;
5,311,297; 5,294,974; 5,293,229; 5,260,788; 5,168,358; 5,130,796;
5,126,841; 5,113,255; 4,984,081; RE36,507; RE36,015; other U.S. and foreign
patents pending. 
						

							66
TROUBLESHOOTING
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and
restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the table do not solve the
problem, consult your dealer or call 1-888-726-2377 for assistance.
SymptomRemedy
No powerCheck that  the AC power cord is securely plugged into the AC IN jack.
Check that  the AC power plug is securely plugged into the power outlet.
No reception
•Check that  equipment is connected properly.
•Make sure that the Satellite Dish unit is properly mounted and installed.
•Check that antenna is properly installed and oriented.
•Check that  the antenna or cable wire is connected properly.
No picture•Check that equipment is connected properly.
•Check if the channel is available.
No soundCheck that equipment is connected properly.
The remote control is not responding
•Check that the batteries are installed with the correct polarities (+ and -).
•The batteries are depleted:  Replace them with new ones.
•Point the remote control unit at the remote control sensor and operate.
•Operate the remote control unit at a distance of not more than 23 feet (7
meters) from the remote control sensor.
•Remove any obstacles between the remote control unit and remote
control sensor.
The remote control is operational, but
the Digital Satellite Receiver is not
responding•Check that  the AC power plug is securely plugged into the power outlet.
•Make sure the Digital Satellite Receiver is on.
•Make sure the remote control is in SAT mode.
The remote control is operational, but
other component(s) are not responding
•Check that  the AC power plug is securely plugged into the power outlet.
•Make sure the component(s) are on.
•Reprogram the remote control to make sure it is programmed properly
to operate the component(s).
•Make sure the remote control is in the proper component mode (i.e. TV,
VCR, DVD, etc.).
The ACTION button is not responding•Make sure the remote control is in SAT or TV mode.
No key operation (by the unit and/or
the remote control) is effective.Set the POWER button to OFF and then back to ON. Alternatively, turn
off the power, disconnect the power plug and then reconnect it. (The
Digital Satellite Receiver may not be operating properly due to lightning,
static electricity or some other external factor).
No key operation is effective. OSD
reads: “Searching for Satellite Signal.
ODU (Satellite Dish) is momentarily disconnected from the Digital
Satellite Receiver. Alternatively, turn off the power, disconnect the power
plug and then reconnect it. (The Digital Satellite Receiver or the satellite
dish antenna may not be operating properly due to lightning, static
electricity or some other external factor).
VCR is not responding
•Check that  the AC power plug is securely plugged into the power outlet.
•Check that equipment is connected properly.
•Make sure remote control is in VCR mode.
Timer does not work•Make sure the clock is set.
•Check to see whether the timers have overlapping times programmed.
•Check if the timer did not reset to default settings. 
						

							67
SERVICE INFORMATION
Service Information
Product Service
Do not attempt to remove the cover or repair
the unit yourself.  Refer servicing to qualified
personnel only.  
Product Information
For product service related to hardware,
product information or assistance with product
operation, consult your dealer or call 1-888-
726-2377 (
Monday-Friday/ 8AM-10PM) (Sat &
Sun/ 10AM-10PM
)EST. For assistance with
activation, programming and access card, call
1-800-DIRECTV. Please have your Digital
Satellite Receiver Identification Number (ID#)
available when you call.  The ID# is displayed
on your TV screen when the Digital Satellite
Receiver is tuned to any unavailable channel.
If you ship the product
For information on where to ship the product,
call 1-888-726-2377. Carefully pack and send
it prepaid, adequately insured and preferably
in the original carton.  Attach a postage-
affixed letter, detailing the complaint, to the
outside of the carton.  DO NOT send the
product to the Executive or Regional Sales
offices. They are NOT equipped to make
repairs. 
						

							68
NOTES
Panasonic Home and Commercial Products Company,
Division of Matsushita
Electric Corporation of America
One Panasonic Way
Secaucus, New Jersey  07094