Panasonic Dmc Fz10 Operating Instructions Manual

							Playback (advanced)
101
Resizing the Pictures
This function is useful if you want to reduce the file size of the picture, in those cases 
when it needs to be attached to an E-mail or uploaded it to a web site.
Preparation
 Set the mode dial to [ ]. (P30)
1Select [RESIZE].
2Select the picture and set it.
3Select the size and set it.
 [1600]: 1600k1200 pixels
 [1280]: 1280 k960 pixels
 [640]: 640k 480 pixels
PLAY2/2SETUP
TRIMMING RESIZE
FORMAT
MENU
SET
WB
REVIEWSET
WB
REVIEW
EXITSET
SELECTMENU
SET
WB
REVIEWSET
WB
REVIEW
2304
100 _
00011/19
EXITSETSELECTMENU
RESIZE
SET
WB
REVIEWSET
WB
REVIEW
2304
1600
RESIZE2304
100 _
00011/19
EXITRESIZESELECTMENU
FZ10-PP.book  101 ページ  ２００３年１１月１８日　火曜日　午後１時７分 
						

							Playback (advanced)
102
4Select [YES] or [NO] and set it.
 When you select [YES], the picture is overwritten.
 When resized pictures are  overwritten, they cannot be 
restored.
 Close the menu by pressing the  [MENU] button 2 times after 
finishing the resizing.
¬Suggestions/Tips ¬
 The following pictures cannot be  resized.
– Pictures not over 640 k480 pixels
– Pictures recorded with setting the  picture size to [HDTV]
– Motion images
– Flip animation
– Pictures with audio
– Rotated pictures (You can resize  them if you turn them back.)
 It may not be possible to resize the 
pictures recorded with other 
equipment.
SET
WB
REVIEWSET
WB
REVIEW
DELETE ORIGINAL
PICTURE?
YES NO
RESIZE
SET
SELECTCANCELMENU
FZ10-PP.book  102 ページ  ２００３年１１月１８日　火曜日　午後１時７分 
						

							Playback (advanced)
103
Trimming the Pictures
Preparation
 Set the mode dial to [ ]. (P30)
1Select [TRIMMING].
2Select the picture to trim.
3Enlarge or decrease the picture.
PLAY2/2SETUP
TRIMMING RESIZE
FORMAT
MENU
SET
WB
REVIEWSET
WB
REVIEW
EXITSET SELECTMENU
SET
WB
REVIEWSET
WB
REVIEW
TRIMMING2304
100_
00011/19
EXITSETSELECTMENU
TRIMMING2304
100_
00011/19
EXITMENUZOOM
T W
FZ10-PP.book  103 ページ  ２００３年１１月１８日　火曜日　午後１時７分 
						

							Playback (advanced)
104
4Shift the picture and press the 
shutter button fully to set.
5Select [YES] or [NO] and set it.
 When you select [YES], the picture 
is overwritten.
 When trimmed pictures are 
overwritten, they cannot be 
restored.
 Close the menu by pressing the 
[MENU] button 2 times after 
finishing the trimming.
¬Suggestions/Tips ¬
 The following pictures cannot be 
trimmed.
– Pictures equal to or smaller than 
640k480 pixels
– Pictures recorded with setting the 
picture size to [HDTV]
– Motion images
– Flip animation
– Pictures with audio
– Rotated pictures (You can trim them 
if you rotate them back.)
 It may not be possible to trim pictures 
recorded with other equipment.
 The picture size of the trimmed 
pictures may become smaller than that 
of the original one depending on the 
cut size.
 The picture quality of the trimmed 
picture may be deteriorated.
TRIM:SHUTTERZOOM
SET
WB
REVIEW
TRIMMING2304
100_
00011/19
EXITMENU
SET
WB
REVIEWSET
WB
REVIEW
DELETE ORIGINAL
PICTURE?
YESNO
SET SELECTCANCELMENU
TRIMMING
FZ10-PP.book  104 ページ  ２００３年１１月１８日　火曜日　午後１時７分 
						

							Playback (advanced)
105
Formatting the Card
Preparation
 Set the mode dial to [ ]. (P30)
1Select [FORMAT].
2Select [YES] to format.
¬Suggestions/Tips ¬
 Usually, it is not necessary to format 
the card (initializing). Format the card 
when the message [MEMORY CARD 
ERROR] appears.
 If the card has been formatted by a PC 
or other equipment, format the card on 
the camera again.
 After formatting, recorded pictures and 
any other data cannot be recovered.
 If the card is formatted all images 
and data will be permanently 
erased. They cannot be reclaimed. 
If any important pictures are on the 
card, please copy them to your PC 
before proceeding.
 During formatting, do not turn the 
camera off.
 When the remaining battery power 
(P13) is low, use the AC adaptor.
 If the card is protected, you cannot 
format the card.
 If the card cannot be formatted, 
consult your nearest servicenter.
PLAY2/2SETUP
TRIMMING RESIZE
FORMAT
MENU
SET
WB
REVIEWSET
WB
REVIEW
EXITSET SELECTMENU
SET
WB
REVIEWSET
WB
REVIEW
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
YESNO
SETSELECT
For USA assistance, please call: 1-800-272-7033 
or send e-mail to : [email protected]
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
FZ10-PP.book  105 ページ  ２００３年１１月１８日　火曜日　午後１時７分 
						

							Playback (advanced)
106
Playing Back Pictures with a TV Screen
ªPlaying back pictures with A/V cable (supplied)
 Turn the camera and the TV off.
1Connect the A/V cable to the
[A/V OUT] socket of the camera.
2Connect the A/V cable to the video 
input and the audio input sockets 
of the TV.
 Yellow: to the video input socket
 White: to the audio input socket
3Turn the TV on and select external 
input.
4Turn the camera on and then set 
the mode dial to Playback mode 
[].
ªViewing pictures in other 
countries
When setting [VIDEO OUT] on the 
menu, you can view pictures on a TV in 
other countries (regions) which use the 
NTSC or PAL system.
 Even if you set menu selection for 
[VIDEO OUT] to [PAL], the output 
signal is still NTSC in the recording 
mode.ªPlayback pictures on TV with SD 
Memory Card slot
An SD Memory Card can be played on 
TVs with an SD Memory Card slot.
If you playback pictures recorded using 
[HDTV] mode on a High-Definition TV, 
(HDTV has 16:9 aspect) the picture 
quality will be higher.
¬
Suggestions/Tips ¬
 When connecting to a TV, we 
recommend using the AC adaptor as 
the power source.
 Use the supplied A/V cable only.
 Read the TV operating instructions 
too.
1 2
A/V
OUT
USB
FZ10-PP.book  106 ページ  ２００３年１１月１８日　火曜日　午後１時７分 
						

							Playback (advanced)
107
Before Connecting with USB Connection 
Cable
Select the USB communication system according to the OS of your PC or your 
printer before connecting them to the camera with the USB connection cable 
(supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P26)
1Select [USB MODE].
(In the recording mode)2Select [Mass Storage] or [PTP].
RECSETUP3/3
LANGUAGEENGUSB MODE
EXITSET SELECTMENU
MENU
SET
WB
REVIEW
SET
WB
REVIEWSET
WB
REVIEW
SET
WB
REVIEWSET
WB
REVIEW
Mass StoragePTP
USB MODE
USB
Direct-PrintPictBridge
SETSELECT
USB modePC to be connectedPrinter to be 
connected
Mass Storage
(USB Direct-Print)Windows
® XP Home Edition, 
Windows XP Professional, Windows 
2000 Professional, Windows Me, 
Windows 98/98 SE or Mac OS X 
(10.1 or above), Mac OS 9.xPrinters supporting 
USB Direct-Print.
PTP
(PictBridge)Windows XP Home Edition, Windows 
XP Professional or Mac OS XPrinters supporting 
PictBridge.
FZ10-PP.book  107 ページ  ２００３年１１月１８日　火曜日　午後１時７分 
						

							Playback (advanced)
108
ªWhen using Windows 2000 Professional, Windows Me, Windows 98/98 SE 
or Mac OS 9.x
 When connecting the camera to a PC, do not set [USB MODE] to [PTP].
(When the camera is shipped, [Mass Storage] is selected.)
 When using [Mass Storage] on Windows 98/98 SE, install the USB driver before 
connecting. (When using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you 
do not have to install the USB driver.)
 When connecting to the PC which includes the 
above-mentioned OS with setting the [USB MODE] to [PTP], 
the messages shown on the right appear on the LCD 
monitor of the camera.
The following messages appear for each OS on the display of the PC. Select 
[Cancel] to close the window and disconnect the PC.
PTP
USB MODE
OSMessage
Windows 2000 Professional [Welcome to the Found New Hardware 
Wizard]
Windows Me
Windows 98/98 SE[New Hardware Found]>
[Add New Hardware Wizard]
(When you connect to the PC more than 
2 times, only [Add New Hardware Wizard] 
appears.)
Mac OS 9.x [Software needed for the USB device 
“DMC-FZ10” is not available. Would you like to 
look for the software on the Internet?]
FZ10-PP.book  108 ページ  ２００３年１１月１８日　火曜日　午後１時７分 
						

							Playback (advanced)
109
Connecting to a PC (Mass Storage)
1Turn the camera on and then set 
[USB MODE] to [Mass Storage]. 
(P107)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).
[Windows]
The drive appears on the 
[My Computer] folder.
 If it is the first time for you to 
connect the camera to a PC, the 
required driver is installed 
automatically so that the camera 
can be recognized by the Windows 
Plug and Play, then it appears on 
the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
¬Suggestions/Tips ¬
 When connecting to a PC, we 
recommend using the AC adaptor as 
the power source.
 If the remaining battery power 
becomes low during communication, 
the power indicator blinks and the 
alarm beeps. In this case, stop the 
communication. Then turn the camera 
off and charge the battery.
 When connecting to a PC, pictures 
and sounds are not output from the
[A/V OUT] socket.
 Use the supplied USB connection 
cable only.
A/V
OUT
USB
ACCESS
FZ10-PP.book  109 ページ  ２００３年１１月１８日　火曜日　午後１時７分 
						

							Playback (advanced)
110
Connecting to a PC (PTP)
Do not follow the setting below on the OS except for Windows XP and Mac OS X.
1Turn the camera on and then set 
[USB MODE] to [PTP]. (P107)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).
[Windows]
The camera icon appears on the 
[My Computer] folder.
 If it is the first time for you to 
connect the camera to a PC, the 
required driver is installed 
automatically so that the camera 
can be recognized by the Windows 
Plug and Play, then the camera 
icon appears on the [My Computer] 
folder.[Macintosh]
You can read pictures with image 
capture or iPhoto.¬Suggestions/Tips ¬
 Refer to P108 carefully when 
connecting to the OS except for 
Windows XP and Mac OS X with 
setting [USB MODE] to [PTP].
 When connecting to a PC, we 
recommend using the AC adaptor as 
the power source.
 If the remaining battery power 
becomes low during communication, 
the power indicator blinks and the 
alarm beeps. In this case, stop the 
communication. Then turn the camera 
off and charge the battery.
 When connecting to a PC, pictures 
and sounds are not output from the
[A/V OUT] socket.
 It may take time to display the 
communication screen depending on 
the PC.
A/V
OUT
USB
ACCESS
FZ10-PP.book  110 ページ  ２００３年１１月１８日　火曜日　午後１時７分