Panasonic Dmc Fz100 Operating Instructions Manual

							Advanced (Playback)
- 181 -
You can delete or change the information relating to Face Recognition for the selected 
picture.
Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P28)
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be 
categorised using Face Recognition in [CATEGORY PLAY].
•You cannot edit the Face Recognition information of protected pictures.
  [FACE REC EDIT]
Press  3/4 to select [REPLACE] or [DELETE] and 
then press [MENU/SET].
Press  2/1 to select the picture and then press 
[MENU/SET].
•You cannot select pictures for which Face Recognition 
information has not been registered.
Press  2/1 to select the person and then press 
[MENU/SET].
•[DELETE]  > step6.•You cannot select a person who has not been registered.
Press  3/4/2/ 1 to select the person to replace 
and then press [MENU/SET].
Press  3 to select [YES] and then press [MENU/
SET].
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu. 
						

							- 182 -
Advanced (Playback)
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] Mode menu. (P28)
Press  3/4 to select the copy destination and 
then press [MENU/SET].
Press  2/1 to select the picture and then press [MENU/SET].
Press  3 to select [YES], and then press [MENU/
SET].
•Pressing [MENU/SET] during  copying will cancel the copy 
partway through.
•Do not turn the camera off at any point during the copying 
process.
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu.•If you copy from the built-in memory to a card, all the pictures are copied and then the 
screen automatically returns to the playback screen.
Note
•Image data can be copied only partway when there is not enough space in the card when 
[ ] is selected. We recommend using a card which has more free space than the built-in 
memory (about 40 MB). 
•If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, a new  folder is created and the picture is copied. 
If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, that picture is not copied.  (P217)
•It may take time to copy the picture data.•Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a Panasonic digital camera, you may not be able to 
copy them if they were edited with a PC.)
•[PRINT SET], [PROTECT] or [FAVORITE] settings will not be copied. Perform the settings 
again after copying is finished.
•Motion picture recorded in [AVCHD] cannot be copied.
 [COPY]
: All the picture data in the built-in memory are copied 
onto the card at one time.  > step 4.
: One picture at a time is copied from the card to the  built-in memory.  > step 
3. 
						

							Connecting to other equipment
- 183 -
[PLAYBACK] Mode: ¸
Connecting to other equipmentPlaying Back Pictures on a TV Screen
Preparations:
Set the [TV ASPECT]. (P37)
Turn this unit and the TV off.
1 Yellow: to the video input socket
2 White: to the audio input socket
3 Red: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
•Check the direction and shape of the terminal an d plug in/out while holding the plug straight. 
(Otherwise the connectors may be bent out of shape which will cause trouble.)
Connect the AV cable  B (supplied) to the video input and the audio 
input sockets on the TV.
Connect the AV cable to the [AV OUT] socket on the camera.
Turn the TV on and select external input.
Turn the camera on and then press [ (].
Note
•Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or 
the left and right of the pictures.
•Do not use any other AV cables except the supplied one.•Read the operating instructions for the TV.•When you play back a picture vertically, it may be blurry.•Audio will be played back as stereo (2ch).
Playing back pictures using the AV cable (supplied)
AV OUT/DIGITAL





AV OUT/DIGITAL 
						

							- 184 -
Connecting to other equipment
The recorded still pictures can be played back on a TV with an SD Memory Card slot.Note
•
Depending on the TV model, pictures may  not be displayed on the full screen.•Motion pictures recorded with [AVCHD] can be played back on Panasonic TVs (VIERA) with 
the AVCHD logo mark. In all other cases, connect the camera to the TV using the AV cable 
(supplied) and playback the motion picture.
•SDHC Memory Cards cannot be played back unles s it is a TV compatible with SDHC Memory 
Cards or SDXC Memory Cards.
•SDXC Memory Cards cannot be played back unle ss it is a TV compatible with SDXC Memory 
Cards.
Playing back pictures on a TV with an SD Memory Card slot 
						

							Connecting to other equipment
- 185 -
You can enjoy high quality pictures and motion pictures on the TV by connecting the 
camera with the HDMI compatible high definition TV using HDMI mini cable (optional).
Playing back on the TV with HDMI socket
What is HDMI?
HDMI is the interface for digital devices. When this unit is connected to a HDMI 
compatible device, the image and audio can be output with a digital signal. If you 
connect this unit to a HDMI compatible high definition TV and then play back the 
recorded high definition images, you can enjoy them in high resolution with high quality 
sound.
If you connect this unit to a Panasonic TV compatible with VIERA Link, linked 
operations (VIERA Link) are possible.  (P187)
Preparations: Check the [HDMI MODE].  (P38)
Turn this unit and the TV off.
1 HDMI socket
2 TV with HDMI socket
3 HDMI mini (C type)
A  Align the marks, and insert.
B  HDMI mini cable (optional)
•
Check the direction and shape of the terminal and plug in/out while holding the plug straight. (It 
may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in 
wrong direction.)
Connect the HDMI mini cable B  (optional) to the HDMI input socket 
on the TV.
Connect the HDMI mini cable to the [HDMI] socket on the camera.
Turn the TV on and switch to HDMI input.
Turn the camera on and then press [ (].
•When [VIERA Link]  (P38) is set to [ON] and the camera is connected to a TV supporting 
VIERA Link, input of the TV will be switched automatically and playback screen will be 
displayed  (P187).
HDMI IN
AV OUT/DIGITAL
AV OUT/DIGITAL 
						

							- 186 -
Connecting to other equipment
Note
•Depending on the [ASPECT RATIO], bands may be displayed on the top and bottom or the left 
and right of the pictures.
•Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•During HDMI output, no picture is displayed on the LCD monitor or Viewfinder.•Output from the HDMI mini cable has priority  when both AV cable and HDMI mini cable are 
connected.
•HDMI output is not possible even if you conne ct the HDMI mini cable while the unit is 
connected to the PC or the printer.
•HDMI connection is disabled and connection with the USB connection cable will take priority 
when you connect the USB connection cable while the HDMI mini cable is connected.
•When pictures are displayed, they may not be displayed properly depending on the type of TV.•Read the operating instructions for the TV.•Audio will be played back as stereo (2ch).•Following functions cannot be set in Playback Mode.
[TITLE EDIT], [VIDEO DIVIDE], [TEXT STAMP], [RESIZE], [CROPPING], [LEVELING], 
[FACE REC EDIT], [COPY], multiple selection etc. 
						

							Connecting to other equipment
- 187 -
Connect this unit to a Panasonic TV compatible with VIERA Link with 
a HDMI mini cable (optional) (P185).
Turn the camera on and then press [ (].
Operate with the remote control for the TV.
Panasonic TV compatible with VIERA Link
¢ The shape of the remote control varies depending on the region. Operate following the TV 
guide displayed on screen.
Playback using VIERA Link (HDMI) (HDAVI Control™)
What is the VIERA Link?
•
VIERA Link™ is a new name for EZ Sync™.•This function allows you to use your remote control for the Panasonic TV for easy 
operations when this unit has been connected to a VIERA Link compatible device using a 
HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.)
•VIERA Link is a unique Panasonic function built on a HDMI control function using the 
standard HDMI CEC (Consumer Electronics Control) specification. Linked operations with 
HDMI CEC compatible devices made by other companies are not guaranteed. When using 
devices made by other companies that are compatible with VIERA Link, refer to the 
operating instructions for the respective devices.
•This unit is compatible with VIERA Link Ver.5.  VIERA Link Ver.5 is the newest Panasonic 
version and is also compatible with existing Panasonic VIERA Link devices. (As of 
December 2009)
Preparations: Set the [VIERA Link] to [ON].  (P38)
1 [SUB MENU]
2 [OK]
3 [RETURN] 
						

							- 188 -
Connecting to other equipment
∫Usable functions
Operate with the remote control for the TV.
Multi Playback This is displayed initially when using the VIERA Link.
3 /4/ 2/1: Select the image.
[OK]: Go to one screen display. Pictures in Burst Picture Group are played 
back with Multi Playback. 
(When Burst Picture Group is selected)
Red button: Switch the types of data to play back.
[SUB MENU]: Display the Playback Mode selection screen.
•
The type of data for playback changes in the order of [ALL] > [] > [] > [] > [ALL].•Either the [NORMAL PLAY], [SLIDE SHOW], [CATEGORY 
PLAY], [CALENDAR] or the [FAVORITE PLAY] can be selected 
in the Playback Mode selection screen.
One screen display Select the image while in Multi Playback, and then press 
[OK].
2 /1: Go to previous/next image.
3 : Display the recording information.
4 : Return to Multi Playback.
[OK]: Playback the motion picture (when motion  picture is selected).
Playback burst pictures (when burst picture is 
selected)
Red button: Start the Slide Show.
[SUB MENU]: Go to Slide Show setting screen.
•
During Motion Picture Playback/Burst Picture Playback, 2 /1 will 
fast rewind/fast forward, and  4 will end the playback.
Slide showPress Red button during one screen display.
2 /1: Go to previous/next image (when Slide Show 
is paused/when motion picture is played 
back).
4 : Finish the Slide Show and return to one 
screen display.
[OK]: Pause.
[SUB MENU]: Go to Slide Show setting screen.
•
To playback the audio of the motion pictures, set the [SOUND] in 
the Slide Show setting screen to [AUTO] or [AUDIO].
A Operation icon
A
A 
						

							Connecting to other equipment
- 189 -
Note
•Operation icons are hidden by pressing [RETURN], or if no operation is performed for a while 
when the operation icons are displayed. Operation icons are displayed when one of the 
following buttons are pressed while the operation icons are not displayed.
–3/ 4/2 /1, [OK], [SUB MENU], [RETURN], Red button, Green button, Yellow button•It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 
or more HDMI input terminals on the TV.
•When the [VIERA Link] (P38)  of this unit is set to [ON], operation using the button on this unit 
will be limited.
•VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV 
for how to set etc.)
•If you are not using VIERA Link, set [VIERA Link]  (P38)  to [OFF].
∫Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also 
turns off.
Automatic input switching:
•
If you connect with a HDMI mini cable and then turn on the power on this unit, and then press 
[ ( ], the input channel on the TV automatically switches to this unit’s screen. If the TV’s power 
is in standby status, it will turn on automatically (if [Set] has been selected for the TV’s [Power 
on link] setting).
•Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In 
this case, use the remote control for the TV to switch the input channel. (For details on how to 
switch input, please read the operating instructions for the TV.)
•If VIERA Link does not work properly, refer to page 227.
Note
•If you are unsure whether or not the TV you are using are compatible with VIERA Link, read the 
operating instructions for the TV.
•Available linked operations between this unit and a Panasonic TV is different depending on the 
types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating 
instructions of the TV for the operations that support on the TV.
•Operation is not possible with a cable that is not based on the HDMI standard.
Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•VIERA Link will not work even if you connect the HDMI mini cable while the unit is connected to 
the PC or the printer.
•[HDMI MODE]  (P38) for this unit is determined automati cally when the VIERA Link is operating. 
						

							- 190 -
Connecting to other equipment
Saving the recorded still pictures and motion 
pictures
Methods to export still pictures and motion pictures to other devices will vary depending on 
the file format. (JPEG, RAW, AVCHD, or Motion JPEG). Here are a few suggestions.
File formats that can be used: [AVCHD], [Motion JPEG]
Copy images played back with this unit to  DVD disc, hard disk, or video using a DVD 
recorder, or video.
This can be played back with equipment that is not compatible with high definition 
(AVCHD), so it is convenient for distribut ing copies. Image will be standard quality instead 
of high definition at this time.
1Connect this unit with the recording equipment with an AV cable (supplied).2Start the playback of this unit.
3Start the recording on the recording equipment.
•When ending the recording (copying), stop the playback on this unit after stopping the 
recording in recording equipment.
Note
•When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV ASPECT]  (P37) 
on this unit to [4:3] before starting a copy. The image will be vertically long if you play back 
motion pictures copied with [16:9] setting on a [4:3] aspect TV.
•Do not use any other AV cables except the supplied one.•It is recommended to turn off the display of the screen by pressing the [DISPLAY] on the 
camera while copying.  (P66)
•See the instruction manual for the recording equipment about the details of copying and playing 
back.
Copy the playback image using an AV cable
1Yellow: to the video input socket
2 White: to the audio input socket
3 Red: to the audio input socket
A AV cable (supplied)
MICREMOTEAV OUT/DIGITAL
AV OUT/DIGITAL