Panasonic Dmc Fz150 Owners Manual

- 161 -
Connecting to other equipment
Note
•When the picture is not appropriate to view in 3D (disparity is too large, etc.)–[SLIDE SHOW]: 
The picture will be played back in 2D.
–[MODE PLAY]: 
Confirmation screen is displayed. Select whether or not to play back the picture in 3D.
•2 pictures may be displayed side by side when a 3D  picture is played back on a TV that is not 
3D compatible.
•When a picture recorded in 3D is displayed on the screen of this unit, it is played back in 2D 
(conventional...

Connecting to other equipment
- 162 -
Saving the Recorded Still Pictures and Motion 
Pictures
Methods to export still pictures and motion pictures to other devices will vary depending on 
the file format. (JPEG, RAW, MPO, AVCHD, MP4 or Motion JPEG). Here are a few 
suggestions.
File formats that can be used: [JPEG], [AVCHD]
•
See the instruction manual for the recorder about the details of 
copying and playing back.
•Note that the equipment described may not be available in 
certain countries and...

- 163 -
Connecting to other equipment
File formats that can be used: [AVCHD], [MP4], [Motion JPEG]
Copy images played back with this unit to Blu-ray disc, DVD disc, hard disk, or video using 
a Blu-ray Disc Recorder, DVD recorder, or video.
This can be played back with equipment that is not compatible with high definition, so it is 
convenient for distributing copies. Image will be standard quality instead of high definition 
at this time.
1Connect this unit with the recording equipment with an AV cable...

Connecting to other equipment
- 164 -
File formats that can be used: [JPEG], [RAW], [MPO], [AVCHD], [MP4], [Motion JPEG]
It is possible to acquire still pictures and motion pictures recorded in [AVCHD] or [MP4] 
formats, or create conventional standard quality DVD video from the motion picture that 
was recorded as [AVCHD], using “PHOTOfunSTUDIO” in the CD-ROM (supplied).
Also, you can write images to DVD, combine multiple pictures 
to create a single panorama pictur e, or create a slide show by 
adding...

- 165 -
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•Some PCs can read directly from the card removed from the camera. For details, refer to the 
operating instructions of your PC.
•If the computer being used does not support SDXC Memory Cards, a message prompting you 
to format may appear. (Doing so will cause reco rded images to be erased so do not choose to 
format.)
If the card is not recognized, please refer to the...

Connecting to other equipment
- 166 -
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Connect the camera to a PC via the USB connection cable A 
(supplied).
•Do not use any other USB connection cables except the supplied one. Use of cables 
other than the supplied USB connection cable may cause malfunction.
Press  3/4 to select [PC], and then press [MENU/SET].
•If [USB MODE]  (P58) is set to [PC] in the [SETUP] menu in advance, the camera...

- 167 -
Connecting to other equipment
∫Viewing the contents of the built-in memory or card using the PC (folder 
composition)
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET]  (P57) in the [SETUP] menu has been executed•When a card containing a folder with the same folder number has been inserted (Such as when 
pictures were taken using another make of camera)
•When there is a picture with file number 999 inside the folder
∫Disconnecting the USB connection...

Connecting to other equipment
- 168 -
Still pictures and motion pictures can be uploaded to image sharing sites (Facebook/
YouTube) using the upload tool “LUMIX Image Uploader”.
You do not need to transfer the images to the PC or install dedicated software onto the PC, 
so you can easily upload the images even away from your home or work if there is a PC 
that is connected to the network.
•
It is only compatible with a PC with Windows XP/Windows Vista/Windows 7.•For details, refer to the operating...

- 169 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s LCD monitor.
•
Burst pictures will be displayed as a list, and not as a group.•Some printers can print directly from the card removed from the camera. For details, refer to 
the operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card...

Connecting to other equipment
- 170 -
Selecting a single picture and printing itPress  2/1 to select the picture and then press 
[MENU/SET].
Press  3 to select [PRINT START] and then press 
[MENU/SET].
•Refer to  P171 for the items which can be set before starting to 
print the pictures.
•Disconnect the USB connecti on cable after printing.
Selecting multiple pictures and printing them
Press  3.
Press  3/4 to select an item and then press [MENU/SET].
ItemDescription of settings
[MULTI SELECT] Multiple...