Panasonic Dmc Fz150 Owners Manual

- 191 -
Others
[A FOLDER CANNOT BE CREATED]
•
A folder cannot be created because there are no remaining folder numbers that can be used.> Format the card after saving necessary data on a PC etc.  (P60) If you execute 
[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100. 
(P57)
[PICTURE IS DISPLAYED FOR 16:9 TV]/[PICTURE IS DISPLAYED FOR 4:3 TV]
•
Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect.  (P58)•This message also appears when the USB...

Others
- 192 -
Troubleshooting
First, try out the following procedures (P192 to 201) .
•
The battery is exhausted. Charge the battery.•If you leave the camera on,  the battery will be exhausted.
> Turn the camera off frequently by using the [ECONOMY] etc.  (P56)
•If you connect to a TV compatible with VIERA Link with a HDMI mini cable (optional) and turn 
off the power on the TV with the remote control for the TV, the power on this unit also turns off.
> If you are not using VIERA Link, set [VIERA Link]...

- 193 -
Others
>Check that the exposure is correctly compensated.  (P76)•Setting the [MIN. SHTR SPEED] to faster speed might make the picture darker.
> Set the [MIN. SHTR SPEED]  (P123) to slower speed.
> Unset the settings of White Balance Bracket  (P116).
> Set Auto Bracket  (P77) or the Burst Mode  (P78) to [OFF].
•Is the Self-Timer  (P75) set to [10S / 3PICTURES], or is it set to [FLASH BURST] in Scene Mode 
(P92)?
•The focus range varies depending on the Recording Mode. > Set to the proper mode for...

Others
- 194 -
•When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may 
introduce slight changes to brightness and color. These are a result of the characteristics of the 
light source and do not indicate a malfunction.
•When recording subjects in extremely bright locations or recording under fluorescent lighting, 
LED lighting fixture, mercury lamp, sodium lighting etc., the colors and screen brightness may 
change or horizontal striping may appear on the...

- 195 -
Others
•It is possible that the subject may be warped slightly, or the borders get colored, depending on 
the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the 
image might look warped because the perspective is enhanced when the wide angle is used. 
This is not a malfunction.
•This phenomenon appears when you press the shutter button halfway to set the aperture value 
and does not affect the recorded pictures.
•This phenomenon also appears when the...

Others
- 196 -
•Is the flash closed?> Press [  OPEN] to open the flash.  (P67)
•Flash Mode is not available when Auto Bracket  (P77) or Burst have been set.
•The flash is activated twice when Red-Eye Reduction  (P68) has been set.•Is it set to [FLASH BURST]  (P92) in Scene Mode?
•[ROTATE DISP.]  (P149) is set to [ON].
•Did you press [ (]?•Is there a picture on the built-in memory or the card?
> The pictures on the built-in memory appear when a card is not inserted. The picture data on 
the card appears...

- 197 -
Others
•Is the clock in the camera set properly? (P23)•When pictures edited using a PC or pictures taken by other equipment are searched, they may 
be displayed on dates differing from the actual dates on which the pictures were taken.
•When Digital Red-Eye Correction ([], [], []) is in operation, if you take a picture 
of subject with red color surrounded by a skin tone color, that red part may be corrected to 
black by the Digital Red-Eye Correction function. > It is recommend to take picture...

Others
- 198 -
•Is the camera connected to the TV correctly?> Set the TV input to external input mode.
•Depending on the TV model, the pictures may be  extended horizontally or vertically or they 
may be displayed with their edges cut off.
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of 
the TV? > Connect the camera to the TV with the AV cable (optional), or with the HDMI mini cable 
(optional), and then play back the motion pictures on the camera....

- 199 -
Others
>Disconnect the USB connection cable. Connect it again while the card is inserted in the 
camera.
> Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not 
format.
> If the [ACCESS] displayed on the LCD monitor does not disappear, disconnect the USB 
connection cable after turning off the power.
> Confirm that the login information (login ID/user...

Others
- 200 -
In the following cases, there is no problem with the camera, so do not worry.
•There is a rattling sound when the camera is shaken while the power is off or during Playback 
Mode. (Sound of lens moving)
•There is a rattling sound etc., when the power is turned on or off, or when switching from 
Recording Mode to Playback Mode. (Sound of the aperture)
•Vibration is felt when zooming. (Movement of the lens barrel motor)•When you hear a clicking or snapping sound from the lens while taking...