Panasonic Dmc Fz35 Operating Instructions Manual

							- 121 -
Advanced (Recording pictures)
You can add a picture to the information of the registered people, replace or delete the 
pictures which have already been registered, and information such as names and register 
priority.
1Select [FACE RECOG.] from the [REC] Mode menu, and 
then press 1. (P27)
2Press  4 to select [SET] and press [MENU/SET].
3Press 3 to select [EDIT] and then press [MENU/SET].
4Press 3/4/ 2/1 to select the person to edit and then press 
[MENU/SET].
•
To change [NAME], [PRIORITY], [AGE] or [FOCUS ICON] information, go to step 5 of “Registering face image of new person”.5Press  2 to select the image of person, and then press [MENU/SET].
∫To add or replace a face image
6Press  3 to select [ADDITIONAL IMAGE], and then press 
[MENU/SET].
•
To add a face image, go to step 9.7Press  2/1 to select the face image to replace, and then 
press [MENU/SET].
8Press  3 to select [YES] and then press [MENU/SET].9Perform step 3 in “Registering face image of new person”.
∫To delete a face image
6Press  4 to select [DELETE], and then press [MENU/SET].
•When only one picture has been registered, you cannot select [DELETE].7Press  2/1 to select the face image to delete, and then press [MENU/SET].
8Press  3 to select [YES] and then press [MENU/SET].9Perform step 5 in “Registering face image of new person”.
Deleting information of a registered person.
1Select [FACE RECOG.] from the [REC] Mode menu, and 
then press  1. (P27)
2Press  4 to select [SET] and press [MENU/SET].
3Press 3/4 to select [DELETE] and press [MENU/SET].
4Press  3/4/2/ 1 to select  the image of the person to delete 
and then press [MENU/SET].
5Press  3 to select  [YES] and then press [MENU/SET].
6Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.•You can also press the shutter button halfway to close the menu.
Change the information for a registered person
Deleting the information for a registered person 
						

							Advanced (Recording pictures)
- 122 -
When [AUTO REGISTRATION] is set to [ON] in step 3 of “Change the information for a 
registered person”  (P121) while [FACE RECOG.] in the [REC] Mode menu is set to [ON], 
the registration screen will display automatically after taking a picture of a face that has a 
high number of appearances.
•
Registration screen is displayed after approximately 3 pictures. (It is not counted when Burst 
and Auto Bracket/Color Bracket is set.)
•It may be extremely hard to recognize only with [AUTO REGISTRATION], so register the face 
images with [FACE RECOG.] in the [REC] Mode menu beforehand.
∫ Registering from the automatic registration screen
1Press  3 to select [YES] and then press [MENU/SET].
•If there are no registered persons, proceed to step 3.•Selection screen is displayed again when [NO] is selected, and 
when [YES] is selected with 3, [AUTO REGISTRATION] will be 
set to [OFF].
2Press  3/4  to select [NEW PERSON] or 
[ADDITIONAL IMAGE] and then press [MENU/SET].
•
After additionally registering or changing a face image, the screen returns automatically to 
the recording screen.
3Perform Step 5 in “Registering face image of new person”.
Note
•
If the registration screen will not display, it may display easier if recording in the same 
conditions or with the same expressions.
•If a face is not recognized even though it is registered, it will make the recognition easier by 
registering the person again using [FACE RECOG.] in the [REC] Mode menu in that 
environment.
•If the registration screen is displayed for a person that is already registered, it will make the 
recognition easier by additionally registering.
•It may make recognition harder when a picture recorded with flash is registered.
Auto Registration
ItemDescription of settings
[NEW PERSON]
•A list of registered people is displayed when there are 6 people 
already registered. Select the person to be replaced.
[ADDITIONAL IMAGE]
To additionally register a face image for a registered person.
Press  3/4/2/ 1 to select the person to whom you wish 
to add to the picture, and then press [MENU/SET].
•
If 3 images have already been registered, the picture 
replacement screen will appear. In this case, select the picture 
you wish to replace. 
						

							- 123 -
Advanced (Recording pictures)
Changing the sensitivity of Face Recognition.
1Select [FACE RECOG.] from the [REC] Mode menu, and then press 1. (P27)
2Press  4 to select [SET] and then press [MENU/SET].
3Press  4 to select [SENSITIVITY] and then press [MENU/SET].4Press  3/4  to select [HIGH] or [LOW] and then press [MENU/SET].
•
To return to the original settings, select [NORMAL].5Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.•You can also press the shutter button halfway to close the menu.
Sensitivity
ItemDescription of settings
[HIGH]
Set when recognition is difficult.
The likelihood of recognition increases, but so does the likelihood 
of mistaken recognition.
[LOW]Set when the frequency of mistaken recognition is high. 
						

							Advanced (Recording pictures)
- 124 -
[REC] Mode: 
Useful Functions at Travel Destinations
For details on the [SETUP] menu settings, refer to P27.
If you set the departure date and the location of the vacation in advance, the number of 
days that have passed since the departure date (which day of the vacation it is) is 
recorded when you take the picture. You can display the number of days that have passed 
when playing back the pictures and stamp it on the recorded pictures with [TEXT STAMP]  
(P160) .
•
The number of days that have passed since the departure date can be printed out using the 
“PHOTOfunSTUDIO 4.0 HD Edition” bundled software on the CD-ROM (supplied).
•Select [CLOCK SET] to set the current date and time in advance.  (P24)
Select [TRAVEL DATE] from the [SETUP] menu, 
and then press 1.
Press  3 to select [TRAVEL SETUP] and then press 
1.
Press  4 to select [SET] and then press [MENU/
SET].
Press  3/4 /2 /1 to set the departure date (year/
month/day), and then press [MENU/SET].
Recording which Day of the Vacation and the Location of the Vacation 
						

							- 125 -
Advanced (Recording pictures)
Press 3/4/2/1 to set the return date (year/month/
day), and then press [MENU/SET].
•If you do not want to set the return date, press [MENU/SET] 
while the date bar is displayed.
Press  4 to select [LOCATION] and then press  1.
Press  4 to select [SET] and then press [MENU/
SET].
Enter the location.
•For details on how to enter characters, read the [TITLE EDIT] 
section on  P158.
Press [MENU/SET] twice to close the menu.
Take a picture.
•The number of days that have passed since the departure date is displayed for about 
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date 
is set.
•When the travel date is set, [ —] appears on the lower right of the screen. 
						

							Advanced (Recording pictures)
- 126 -
∫Canceling the travel date
The travel date is automatically canceled if the current date is after the return date. If you 
want to cancel the travel date before the end of the vacation, select [OFF] on the screen 
shown in step 
3 or 7, and then press [MENU/SET] twice.
[LOCATION] also will be set to [OFF] automatically when the travel date is set to [OFF] in 
step 
3.
Note
•
The travel date is calculated using the date in the clock setting and the departure date you set. 
If you set [WORLD TIME]  (P127) to the [DESTINATION], the travel date is calculated using the 
date of the travel destination.
•The travel date setting is memorized even if the camera is turned off.•If [TRAVEL DATE] is set to [OFF], the number of days that have passed since the departure 
date will not be recorded. Even if [TRAVEL DATE] is set to [SET] after taking the pictures, 
which day of the vacation you took them is not displayed.
•For the date before the departure date, [-] (minus) is displayed in orange and the day of the 
vacation is not recorded.
•If the travel date is displayed as [-] (minus) in white, there is a time difference that involves date 
change between the [HOME] and [DESTINATION]. (It will be recorded)
•The text set as [LOCATION] can be edited later with [TITLE EDIT].•The name for [BABY1]/[BABY2] and [PET] in Scene Mode will not be recorded when 
[LOCATION] is set.
•[TRAVEL DATE] cannot be set for motion pictures recorded with [AVCHD Lite].•[LOCATION] cannot be recorded in the following cases.–When [QUALITY] is set to [ ] or [ ]–When recording motion pictures•[TRAVEL DATE] cannot be set in the Intelligent Auto Mode. Setting of other recording mode will 
be reflected. 
						

							- 127 -
Advanced (Recording pictures)
For details on the [SETUP] menu settings, refer to P27.
You can display the local times at the travel destinations and record them on the pictures 
you take.
•
Select [CLOCK SET] to set the current date and time in advance.  (P24)
Recording Dates/Times at Overseas Travel Destinations (World Time)
Select [WORLD TIME] from the [SETUP] menu, 
and then press  1.
•When first using the camera after purchasing it, the [PLEASE 
SET THE HOME AREA] message appears. Press [MENU/
SET], and set the home area on the screen in step 
3.
Press 4 to select [HOME], and then press 
[MENU/SET].
Press  2/1  to select the home area, and then 
press [MENU/SET].
A  Current time
B  Time difference from GMT (Greenwich Mean Time)
•If daylight saving time [ ] is used at the home area, press 
3. Press 3 again to return to the original time.
•The daylight saving time setting for the home area does not 
advance the current time. Advance the clock setting by one 
hour.
A
B 
						

							Advanced (Recording pictures)
- 128 -
Note
•Return the setting to [HOME] when the vacation is finished by performing steps 1, 2 and 3.•If [HOME] is already set, change only the travel destination, and use.•If you cannot find the travel destination in the areas displayed on the screen, set by the time 
difference from the home area.
Press  3 to select [DESTINATION] and then 
press [MENU/SET] to set.
C Depending on the setting, the time at the travel destination 
area or the home area is displayed.
Press  2/1  to select the area the travel 
destination is in and then press [MENU/SET] to 
set.
D Current time of the destination area
E Time difference
•If daylight saving time [ ] is used at the travel destination, 
press  3. (The time advances by one hour.) Press  3 again to 
return to the original time.
Press [MENU/SET] to close the menu.
C
D
E 
						

							- 129 -
Advanced (Recording pictures)
Using the [REC] Mode menu
For details on [REC] Mode menu settings, refer to P27.
Set the number of pixels. The higher the numbers of pixels, the finer the detail of the 
pictures will appear even when they are printed onto large sheets.
Applicable modes: 
∫ When the aspect ratio is [ X].
¢ This item cannot be set in the Intelligent Auto Mode.
∫When the aspect ratio is [ Y].
∫ When the aspect ratio is [ W].
 [PICTURE SIZE]
 (12M) 4000k3000 pixels
 (8M )¢3264 k2448 pixels
 (5M ) 2560k1920 pixels
 (3M ) 2048k1536 pixels
 (2M )
¢1600 k1200 pixels
 (0.3M )¢640 k480 pixels
 (10.5M) 4000k2672 pixels
 (7M )
¢3264 k2176 pixels
 (4.5M )¢2560 k1712 pixels
 (2.5M )¢2048 k1360 pixels
 (9M) 4000k2248 pixels
 (6M )
¢3264 k1840 pixels
 (3.5M )¢2560 k1440 pixels
 (2M )¢1920 k1080 pixels 
						

							Advanced (Recording pictures)
- 130 -
Note
•
“EZ” is an abbreviation of “Extended Optical Zoom”.•A digital picture is made of numerous dots called pixels. The 
higher the numbers of pixels, the finer the picture will be 
when it is printed on a large piece of paper or displayed on a 
PC monitor.
A Many pixels (Fine)
B Few pixels (Rough)
¢ These pictures are examples to show the effect.
•If you change the aspect ratio, set the picture size again.•The Extended Optical Zoom does not work when Macro Zoom is set or in [HIGH SENS.], 
[HI-SPEED BURST], [FLASH BURST], [PIN HOLE], [FILM GRAIN] and [PHOTO FRAME] in 
Scene Mode so the picture size for [ ] is not displayed.
•You cannot set [PICTURE SIZE] when [QUALITY] is set to [ ] or [ ].•Pictures may appear mosaic depending on the subject and the recording conditions.•Refer to P215  for information about the number of recordable pictures.
For details on [REC] Mode menu settings, refer to  P27.
Set the compression rate at which the pictures are to be stored.
Applicable modes: 
¢ 1 It is fixed to maximum recordable pixels of each aspect ratio.
¢ 2 If you delete a RAW file from the camera, the corresponding JPEG image will also be 
deleted.
Note
•If a RAW picture is recorded with the built-in memory, it will take time to write the picture data.•Refer to P215  for information about the number of recordable pictures.•You can enjoy more advanced picture editing if you use RAW files. You can save RAW files in a 
file format (JPEG, TIFF etc.) that can be displayed on your PC etc., develop them and edit them 
using the software “SILKYPIX Developer Studio” by Ichikawa Soft Laboratory on the CD-ROM 
(supplied).
•[ ] images are recorded with a smaller data volume than [ ].
 [QUALITY]
[A ]: Fine (when giving priority to the picture quality)
[› ]: Standard (when using the standard picture quality and increasing the number of 
pictures to be recorded without changing the number of pixels)
[] : RAW file (When the image is to be edited with a PC in high quality)
¢1
[] :RAW iJPEG file: (In addition to the [RAW] settings, a standard-equivalent JPEG 
image is simultaneously created.)¢ 2