Panasonic Dmc Fz35 Operating Instructions Manual

							- 151 -
Advanced (Playback)
[PLAYBACK] Mode: ¸
Advanced (Playback)Playing Back Pictures in Sequence (Slide Show)
You can play back the pictures you have taken in synchronisation with music, and you can 
do this in sequence while leaving a fixed interval between each of the pictures.
You can also put together a slide show composed of only still pictures, only motion 
pictures, only pictures of a particular category, or only favorites.
We recommend this feature when you view your pictures by connecting the camera to a 
TV.
Slide the [REC]/[PLAYBACK] selector switch to 
[( ], and then press [MENU/SET].
Press  1.
Press  3/4  to select [SLIDE SHOW], and then press [MENU/SET].
When [ALL], [PICTURE ONLY], [MOTION PIC. ONLY] or [FAVORITE] has been 
selected in step 4
Press 
3/4  to select the item and then press 
[MENU/SET].
•[FAVORITE] can be selected only when [FAVORITE] on the 
[PLAYBACK] menu  (P166) is at [ON] and there are pictures 
already set as favorites.
Press  3 to select [START] and then press [MENU/
SET].
Press  4 to finish the slide show.
•Normal playback resumes after the slide show finishes. 
						

							Advanced (Playback)
- 152 -
When [CATEGORY SELECTION] has been selected in step 4
∫Operations performed during slide show
The cursor displayed during playback is the same as  3/4/2/ 1.
•The menu screen is restored when [ ‚] is pressed.
Press  3/4/2/1 to select the category to play back 
and then press [MENU/SET] to set.
•For details on categories, refer to  P154.
Press  3 to select [START] and then press [MENU/
SET].
Press  4 to finish the slide show.
•Normal playback resumes after the slide show finishes.
A Play/Pause
B Stop
C Back to previous picture
¢
DAhead to next picture¢
¢ These operations can be performed only in the Pause Mode or during 
motion picture playback.
E Reduce volume level
F Increase volume level
WT 
						

							- 153 -
Advanced (Playback)
∫Changing the slide show settings
You can change the settings for slide show playback by selecting 
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from one 
picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen 
effect.
•[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures 
are played back with the recommended effects in each category.
•[EFFECT] is set to [OFF] when playing slide show with motion pictures only.
[SETUP]
[DURATION] or [REPEAT] can be set.
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.•[AUDIO] can be set only when [OFF] has been selected as the [MUSIC] setting. Audio will be 
played along with audio of the motion picture by setting the [AUDIO] to [ON].
Note
•Music effects cannot be played back simultaneously with motion pictures.•It is not possible to add new music effects.
ItemSettings
[DURATION] 1SEC./2SEC./3SEC./5SEC.
[REPEAT] ON/OFF
[MUSIC] ON/OFF
[AUDIO] ON/OFF 
						

							Advanced (Playback)
- 154 -
[PLAYBACK] Mode: ¸
Selecting Pictures and Playing them Back ([MODE 
PLAY]/[CATEGORY PLAY]/[FAVORITE PLAY])
Playback in [PICTURE], [AVCHD Lite], or [MOTION JPEG] can be selected.
Perform steps 1 and 2 on page  151.
Press 
3/4 to select [MODE PLAY] and then press [MENU/SET].
.
This mode allows you to search images by Scene Mode or other categories (such as 
[PORTRAIT], [SCENERY] or [NIGHT SCENERY]) and sort the pictures into each of the 
categories. You can then play back the pictures in each category.
Perform steps 1 and 2 on page  151.
Press  3/4  to select 
[CATEGORY PLAY], and then press [MENU/SET].
 [MODE PLAY]
Press  3/4  to select the item and then press 
[MENU/SET].
 [CATEGORY PLAY] 
						

							- 155 -
Advanced (Playback)
Press 3/4 /2 /1 to select the category and then 
press [MENU/SET] to set.
•If a picture is found in a category, the category icon turns blue.•It may take time to search the picture files if there are a lot on the 
card or the built-in memory.
•If you press [ ‚] while searching, the searching will stop halfway.•Pictures are sorted into the categories shown below.
¢   Press  3/4/2/1 to select the person to playback and then press [MENU/SET].
Face Recognition may not be possible or may not recognize faces correctly even 
for registered faces, depending on the facial expression and environment.
You can play back the pictures you have set as [FAVORITE]  (P166) (Only when 
[FAVORITE] is set to [ON] and there are pictures which have been set to [FAVORITE]).
Perform steps 1 and 2 on page  151.
Press  3/4  to select [FAVORITE PLAY], and then press [MENU/SET].
Note
•You can use only [ROTATE DISP.], [PRINT SET], or [PROTECT] in the [PLAYBACK] menu.
[CATEGORY]Recording information 
e.g. Scene Modes[CATEGORY]Recording information e.g. Scene Modes
[FACE RECOG.]
¢[SPORTS], [PARTY], 
[CANDLE LIGHT], 
[PANNING], 
[FIREWORKS], [BEACH], 
[SNOW], 
[AERIAL PHOTO]
*
[PORT RAIT], 
[i-PORTRAIT], 
[NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT], 
[BABY1]/[BABY2], 
[i-BABY]
,
[SCENERY], 
[i-SCENERY], [SUNSET], 
[AERIAL PHOTO]Î[BABY1]/[BABY2], 
[i-BABY]
í[PET]
1[FOOD]
.
[NIGHT PORTRAIT], 
[i-NIGHT PORTRAIT], 
[i-NIGHT SCENERY], 
[STARRY SKY] [TRAVEL DATE]
Í[AVCHD Lite], 
[MOTION JPEG]
 [FAVORITE PLAY] 
						

							Advanced (Playback)
- 156 -
[PLAYBACK] Mode: ¸
Playing Back Motion Pictures
•This unit was designed to play motion pictures using the QuickTime Motion JPEG and 
AVCHD Lite formats that were taken with this model (only).
•Only [AVCHD Lite] motion pictures recorded with this unit and Panasonic digital cameras 
(LUMIX) can be played back with this unit as AVCHD Lite format.
∫Operations performed during motion picture playback
The cursor displayed during playback is the same as  3/4/2/ 1.
A Play/Pause
B Stop
C Fast rewind, Frame-by-frame rewind
¢
DFast forward, Frame-by-frame forward¢
¢ These operations can be performed only in the Pause Mode.
E Reduce volume level
F Increase volume level
Note
•Sound can be heard through the speaker. Refer to [VOLUME]  (P31) for information about how 
to adjust the volume in the [SETUP] menu.
•Please note that the bundled software includes QuickTime or “PHOTOfunSTUDIO 4.0 HD 
Edition” to play back motion picture files created with the camera on the PC.
•QuickTime Motion JPEG motion pictures that were recorded with a PC or other equipment may 
have lower image quality or may not be able to play back with this unit.
•When using a high capacity card, it is possible that fast rewinding may be slower than usual.
Motion pictures
Press  2/1 to select a picture with a 
motion picture icon (such as [ ]), 
and then press  3 to play back.
A Motion picture icon
B The motion picture recording time
•After playback starts, the elapsed playback 
time is displayed on the upper right of the 
screen.
For example, 8 minutes and 30 seconds is 
displayed as [8m30s].
[MOTION JPEG] [AVCHD Lite]
BAAB
WT 
						

							- 157 -
Advanced (Playback)
[PLAYBACK] Mode: ¸
Using the [PLAYBACK] Mode menu
You can use various functions in Playback Mode to rotate pictures, set protection for them 
etc.
•
With [TEXT STAMP], [RESIZE], [TRIMMING] or [LEVELING], a new edited picture is created. 
A new picture cannot be created if there is no free space on the built-in memory or the card so 
we recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.Note
•
The recording date of the picture selected in the playback screen becomes the date selected 
when the calendar screen is first displayed.
•If there are multiple pictures with the same recording date, the first picture recorded on that day 
is displayed.
•You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as January 1st, 2009.•If you take pictures after setting the travel destination in [WORLD TIME], the pictures are 
displayed by the dates at the travel destination in calendar playback.
 [CALENDAR]
Select [CALENDAR] on the [PLAYBACK] Mode menu.  (P27)
•You can also rotate the zoom lever several times towards [ L] (W) to display the 
calendar screen.  (P56)
Press 3/4 /2 /1 to select the date to be played 
back.
3/ 4: Select the month
2/ 1: Select the date
•
If there were no pictures recorded during a month, the month is 
not displayed.
Press [MENU/SET] to display the pictures that were 
recorded on the selected date.
•Press [ ‚] to return to the calendar screen.
Press  3/4 /2 /1 to select a picture and then press [MENU/SET].
•The picture that was selected will appear. 
						

							Advanced (Playback)
- 158 -
You can add text (comments) to pictures. After text has been registered, it can be included 
in prints using [TEXT STAMP] (P160). (Only alphabetic characters and symbols can be 
entered.)
Names set in [BABY1]/[BABY2] and [PET] in Scene Mode or [LOCATION] in travel date 
are also recorded as the titles.
Select [TITLE EDIT] on the [PLAYBACK] Mode menu.  (P27)
Press  3/4  to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4 /2 /1 to select text and then press 
[MENU/SET] to register.
•Press [DISPLAY] to switch text between [A] (capitals), [a] (small 
case) and [&/1] (special characters and numbers).
•The entry position cursor can be moved left and right with the 
zoom lever.
•To enter a blank, move the cursor to [SPACE] or to delete an entered character, move 
the cursor to [DELETE], and press [MENU/SET].
•To stop editing at any time during text entry, press [ ‚].•A maximum of 30 characters can be entered. (Maximum of 9 characters when setting 
names in [FACE RECOG.])
Press  3/4 /2 /1 to move the cursor to [EXIT] and then press [MENU/
SET] to end text input.
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is selected.•Press [MENU/SET] to close the menu.
 [TITLE EDIT]
Select the picture, and then 
press [MENU/SET] to set.
•[ ’ ] is displayed for pictures with titles 
already registered.
[MULTI] setting
Press [DISPLAY] to set (repeat), 
and then press [MENU/SET] to set. [SINGLE]
[MULTI]
Press  2/1 to 
select the picture. Press 
3/4/ 2/1 to 
select the pictures.
•
The setting is canceled when [DISPLAY] is pressed again. 
						

							- 159 -
Advanced (Playback)
∫Delete the title
[SINGLE] setting
1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].
2Press [ ‚].
3Press [MENU/SET] to close the menu.
[MULTI] setting
1Select [EXIT] without entering text in step 4, and then press [MENU/SET].2Press [MENU/SET] to close the menu.
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.•The name setting of [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in Scene Mode or 
[LOCATION] in travel date can also be registered by using the operation in steps 4 and 
following.
•The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [LOCATION] in travel date and 
[TITLE EDIT] cannot be registered at the same time.
•You can print out texts (comments) using the “PHOTOfunSTUDIO 4.0 HD Edition” bundled 
software on the CD-ROM (supplied).
•You can set up to 50 pictures at one time with [MULTI].•You cannot use [TITLE EDIT] for the following pictures.–Motion pictures–Protected pictures–Pictures taken using [ ] or [ ]–Pictures recorded with other equipment 
						

							Advanced (Playback)
- 160 -
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be 
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] Mode menu. (P27)
Press  3/4  to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4/2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE] 
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[AGE]  (P98)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
[TITLE]
Text is printed together with the image for pictures that have already been recorded 
with text in [FACE RECOG.] or [BABY1]/[BABY2] and [PET] name settings in Scene 
Mode, [LOCATION] in travel date or [TITLE EDIT].
  [TEXT STAMP]
Select the picture, and then 
press [MENU/SET] to set.
•[ ‘ ] appears on screen if the picture is 
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), 
and then press [MENU/SET] to set.
•
The setting is canceled when 
[DISPLAY] is pressed again.
[SINGLE] [MULTI]
Press  2/1 to 
select the picture. Press 
3/4/ 2/1 to 
select the pictures.
[W/OTIME] : Stamp the year, month and date.
[WITHTIME] : Stamp the year, month, day, hour and minutes.