Panasonic Dmc Fz35 Operating Instructions Manual

							- 171 -
Advanced (Playback)
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] Mode menu. (P27)
Press  3/4 to select the copy destination and then 
press [MENU/SET].
Press  2/1  to select the picture and then press [MENU/SET].
Press  3 to select [YES], and then press [MENU/
SET].
•Pressing [MENU/SET] during copying will cancel the copy 
partway through.
•Do not turn the camera off at any point during the copying 
process.
Press [ ‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.•If you copy from the built-in memory to a card, all the pictures are copied and then the 
screen automatically returns to the playback screen.
Note
•Image data can be copied only partway when there is not enough space in the card when 
[ ] is selected. We recommend using a card which has more free space than the built-in 
memory (about 40 MB). 
•If a picture exists with the same name (folder number/file number) as the picture to be copied in 
the copy destination when [ ] is selected, a new folder is created and the picture is copied. 
If a picture exists with the same name (folder number/file number) as the picture to be copied in 
the copy destination when [ ] is selected, that picture is not copied.  (P202)
•It may take time to copy the picture data.•Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a Panasonic digital camera, you may not be able to 
copy them if they were edited with a PC.)
•Print settings on the original picture data will not be copied. Set the print settings again after 
copying is finished.
•Motion picture recorded in [AVCHD Lite] cannot be copied.
 [COPY]
: All the picture data in the built-in memory are copied 
onto the card at one time.  > step 4.
: One picture at a time is copied from the card to the  built-in memory.  > step 
3. 
						

							Connecting to other equipment
- 172 -
[PLAYBACK] Mode: ¸
Connecting to other  equipmentPlaying Back Pictures on a TV Screen
Preparations:
Set the [TV ASPECT]. (P36)
Turn this unit and the TV off.
1 Yellow: to the video input socket
2 White: to the audio input socket
3 Red: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
•Check the direction and shape of the terminal and plug in/out while holding the plug straight. 
(Otherwise the connectors may be bent out of shape which will cause trouble.)
Connect the AV cable  B (supplied) to the video input and the audio 
input sockets on the TV.
Connect the AV cable to the [AV OUT] socket on the camera.
Turn the TV on and select external input.
Turn the camera on, and slide the [REC]/[PLAYBACK] selector switch 
to [ (].
Note
•Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or 
the left and right of the pictures.
•Do not use any other AV cables except the supplied one.•Read the operating instructions for the TV.•When you play back a picture vertically, it may be blurry.•Audio will be played back as stereo (2ch).
Playing back pictures using the AV cable (supplied)
DIGITAL/AV OUT



 
						

							- 173 -
Connecting to other equipment
Still pictures recorded on an SD Memory Card can be played back on a TV with an SD 
Memory Card slot.Note
•
Depending on the TV model, pictures may not be displayed on the full screen.•Motion pictures recorded with [AVCHD Lite] can be played back on Panasonic TVs (VIERA) 
with the AVCHD logo mark. In all other cases, connect the camera to the TV using the AV cable 
(supplied) and playback the motion picture.
•You cannot play back pictures on SDHC cards if the TV does not support these cards.
You can enjoy high quality pictures and motion pictures on the TV by connecting the 
camera with the HDMI compatible high definition TV using HDMI mini cable (optional).
Playing back pictures on a TV with an SD Memory Card slot
Playing back on the TV with HDMI socket
What is HDMI?
HDMI is the interface for digital devices. When this unit is connected to a HDMI 
compatible device, the image and audio can be output with a digital signal. If you 
connect this unit to a HDMI compatible high definition TV and then play back the 
recorded high definition images, you can enjoy them in high resolution with high quality 
sound.
If you connect this unit to a Panasonic TV compatible with VIERA Link, linked 
operations (VIERA Link) are possible. (P176) 
						

							Connecting to other equipment
- 174 -
Preparations: Check the [HDMI MODE]. (P36)
Turn this unit and the TV off.
1 HDMI socket
2 TV with HDMI socket
3 HDMI mini (C type)
A Align the marks, and insert.
B HDMI mini cable (optional)
•
Check the direction and shape of the terminal and plug in/out while holding the plug straight. (It 
may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in the 
wrong direction.)
Connect the HDMI mini cable B  (optional) to the HDMI input socket 
on the TV.
Connect the HDMI mini cable to the [HDMI] socket on the camera.
Turn the TV on and switch to HDMI input.
Turn the camera on, and slide the [REC]/[PLAYBACK] selector switch 
to [( ].
•When [VIERA Link] (P37)  is set to [ON] and the camera is connected to a TV supporting 
VIERA Link, input of the TV will be switched automatically and playback screen will be 
displayed  (P176).
HDMI IN 
						

							- 175 -
Connecting to other equipment
Note
•Depending on the [ASPECT RATIO], bands may be displayed on the top and bottom or the left 
and right of the pictures.
•Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, 
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•During HDMI output, no picture is displayed on the LCD monitor or Viewfinder.•Output from the HDMI mini cable has priority when both AV cable and HDMI mini cable are 
connected.
•HDMI output is not possible even if you connect the HDMI mini cable while the unit is 
connected to the PC or the printer.
•HDMI connection is disabled and connection with the USB connection cable will take priority 
when you connect the USB connection cable while the HDMI mini cable is connected.
•When pictures are displayed, they may not be displayed properly depending on the type of TV.•Read the operating instructions for the TV.•Audio will be played back as stereo (2ch).•The following functions cannot be set in Playback Mode.
[TITLE EDIT], [TEXT STAMP], [RESIZE], [TRIMMING], [LEVELING], [FACE REC EDIT], 
[COPY], multiple selection etc. 
						

							Connecting to other equipment
- 176 -
Connect this unit to a Panasonic TV compatible with VIERA Link with 
a HDMI mini cable (optional) (P174).
Turn the camera on, and slide the [REC]/[PLAYBACK] selector switch 
to [ (].
Operate with the TV remote control.
Panasonic TV compatible with VIERA Link
¢ The shape of the remote control varies depending on the region. Operate following the TV 
guide displayed on screen.
Playback using VIERA Link (HDMI) (HDAVI Control™)
What is the VIERA Link?
•
VIERA Link™ is a new name for EZ Sync™.•This function allows you to use your remote control for the Panasonic TV for easy 
operations when this unit has been connected to a VIERA Link compatible device using a 
HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.)
•VIERA Link is a unique Panasonic function built on a HDMI control function using the 
standard HDMI CEC (Consumer Electronics Control) specification. Linked operations with 
HDMI CEC compatible devices made by other companies are not guaranteed. When using 
devices made by other companies that are compatible with VIERA Link, refer to the 
operating instructions for the respective devices.
•This unit is compatible with VIERA Link Ver.4. VIERA Link Ver.4 is the newest Panasonic 
version and is also compatible with existing Panasonic VIERA Link devices. (As of 
December 2008)
Preparations: Set the [VIERA Link] to [ON].  (P37)
1 [SUB MENU]
2 [OK]
3 [RETURN] 
						

							- 177 -
Connecting to other equipment
∫Usable functions
Operate with the TV remote control.
1) Multi playback Press red button on the TV remote control to switch the 
type of data for playback.
•
The type of data for playback changes in the order of [ALL] > [] > [] > [] > [ALL].Select the picture with  3/4/2/ 1 and press  2 for one 
screen display.
•
You can set the slide show etc. when you press 1.2) One screen display Select the image with  2/1.
Recording information is displayed with  3.
You can return to multi playback (1) with  4.
•
When you select a motion picture and perform one screen display, press 2 to play back 
the motion picture.
•During motion picture play back, use  2/1 for back/forward and  4 to stop play back.3) Slide show
Display the slide show setting screen by pressing red 
button in the one screen display (2).
Select [START] and press 2.
The screen will be returned to one screen display (2) by 
pressing  4 to finish the slide show.
•
Press 2 to pause. When the slideshow is paused, you can move between the pictures 
using 2/1.•Press 1 to display the slide show setting screen.
•Playing audio in the slideshow
Set [MUSIC] to [OFF] and [AUDIO] to [ON] in the slide show setting screen.
•Turning control icon display on and off
Operation icons can be hidden when you press 3. Also, operation icons will be displayed 
when you press 1 while the operation icons are hidden.
Note
•It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 
or more HDMI input terminals on the TV.
•When the [VIERA Link]  (P37)  of this unit is set to [ON], operation using the button on this unit 
will be limited.
•VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV 
for how to set etc.)
•If you are not using VIERA Link, set [VIERA Link]  (P37)  to [OFF]. 
						

							Connecting to other equipment
- 178 -
∫Other linked operations
Turning the power off:
If you use the remote control for the TV to turn off the power, the power on this unit also 
turns off. (When connecting the unit to a PC with a USB cable, the power will not turn off.)
Automatic input switching:
•
If you connect with a HDMI mini cable and then turn on the power on this unit, the input channel 
on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it 
will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting).
•Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In 
this case, use the remote control for the TV to switch the input channel. (For details on how to 
switch input, please read the operating instructions for the TV.)
•If VIERA Link does not work properly, refer to page  212.
Note
•If you are unsure whether or not the TV you are using are compatible with VIERA Link, read the 
operating instructions for the devices.
•Available linked operations between this unit and a Panasonic TV is different depending on the 
types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating 
instructions of the TV for the operations that support on the TV.
•Operation is not possible with a cable that is not based on the HDMI standard.
Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, 
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•VIERA Link will not work even if you connect the HDMI mini cable while the unit is connected to 
the PC or the printer.
•[HDMI MODE] (P36)  [1080i] is valid only for the following conditions:
Outputting to HDMI:
–When [PICTURE] is selected in the [MODE PLAY]–When [PICTURE ONLY] is selected in the [SLIDE SHOW]–When [CATEGORY SELECTION]¢ is selected in the [SLIDE SHOW]–When [CATEGORY PLAY]¢ is selected
When the [VIERA Link] is set to [ON]:
–During playback of still pictures on one screen after selecting [ ] displayed on the TV 
screen
–When [PICTURE ONLY] is selected for the [SLIDE SHOW]–When [CATEGORY SELECTION]¢ is selected for the [SLIDE SHOW]–When [CATEGORY PLAY]¢ is selected in the [ALL] and [ ]
¢ Other than [ ] (travel date) and [
Í] ([AVCHD Lite], [MOTION JPEG])–It will be output as [720p] except for the above conditions.•If you have set [HDMI MODE]  (P36) to [AUTO] or [1080i] on this unit and selected [ ] on the 
TV screen for one screen display, the screen may go dark for a short time when the HDMI 
output resolution changes. This is not a malfunction.
•If the picture is disrupted when [HDMI MODE] (P36)  is set to [AUTO] or [1080i], change the 
setting to [720p].
•[ ] ([TRAVEL DATE]) or [Í] ([AVCHD Lite], [MOTION JPEG]) in the 
[CATEGORY SELECTION] of the [SLIDE SHOW] cannot be selected when the [ ] displayed 
on the TV screen is selected. 
						

							- 179 -
Connecting to other equipment
Saving the recorded still pictures and motion 
pictures
Methods to export still pictures and motion pictures to other devices will vary depending on 
the file format. (JPEG, RAW, AVCHD Lite, or Motion JPEG). Here are a few suggestions.
File formats that can be used: [AVCHD Lite], [Motion JPEG]
Copy images played back with this unit to DVD disc, hard disk, or video using a DVD 
recorder, or video.
This can be played back with equipment that is not compatible with high definition 
(AVCHD), so it is convenient for distributing copies. Image will be standard quality instead 
of high definition at this time.
1Connect this unit with the recording equipment with an AV cable (supplied).
2Start the playback of this unit.3Start the recording on the recording equipment.
•When ending the recording (copying), stop the playback on this unit after stopping the 
recording in recording equipment.
Note
•When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV ASPECT]  (P36) 
on this unit to [4:3] before starting a copy. The image will be vertically long if you play back 
motion pictures copied with [16:9] setting on a [4:3] aspect TV.
•Do not use any other AV cables except the supplied one.•It is recommended to turn off the display of the screen by pressing the [DISPLAY] on the 
camera while copying.  (P60)
•See the instruction manual for the recording equipment for details about copying and playing 
back.
Copy the playback image using an AV cable
1Yellow: to the video input socket
2 White: to the audio input socket
3 Red: to the audio input socket
A
AV cable (supplied)
DIGITAL/AV OUT 
						

							Connecting to other equipment
- 180 -
File formats that can be used: [JPEG], [RAW]/[AVCHD Lite], [Motion JPEG]
It is possible to acquire still pictures and motion pictures recorded in [AVCHD Lite] or 
[MOTION JPEG] formats, or create standard quality DVD video which is not high definition 
from the motion picture that was recorded as [AVCHD Lite], using the software 
“PHOTOfunSTUDIO 4.0 HD Edition” in the CD-ROM (supplied).
•
If the files and folders related to [AVCHD Lite] motion pictures 
are deleted, modified, or moved by the Windows Explorer or 
similar, it becomes unable to perform playback, edit, etc., so 
always use 
“PHOTOfunSTUDIO 4.0 HD Edition” to acquire 
the [AVCHD Lite] motion pictures.
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•You can easily print out or mail the pictures you have imported. Use of the “PHOTOfunSTUDIO 4.0 HD Edition” bundled software on the CD-ROM (supplied) is a convenient way of doing this.•Read the separate operating instructions for the supplied software for more information about 
the software in the CD-ROM (supplied) and how to install it.
∫ PC that can be used
•
PC with Windows 98/98SE or older, or Mac OS 8.x or older cannot be connected via USB, but 
it can acquire the pictures if an SD memory card reader/writer can be used.
¢ 1 It is necessary for Internet Explorer 6.0 or newer to be installed. PC with higher processing 
performance is required depending on the function to be used. It may not play back correctly 
or operate correctly depending on the environment of the PC used.
¢ 2 Always acquire the [AVCHD Lite] motion pictures using 
“PHOTOfunSTUDIO 4.0 HD 
Edition”.
Copying to a PC
WindowsMacintosh
98/98SEMe/2000XP/VistaOS 9/OS X
Can the 
PHOTOfunSTUDIO be 
used? —
≤
¢1—
Can the [AVCHD Lite] 
motion picture be 
acquired to the PC? —
≤
¢2—
Can the still pictures and 
[MOTION JPEG] motion 
pictures in the digital 
camera be acquired to 
the PC using a USB 
connection cable? —
≤ ≤
(OS 9.2.2/OS X 
[10.1~10.5])