Panasonic Dmc G7 Owners Manual

191
6. Shutter and Drive Settings
•The picture will be saved in JPEG format.•The picture will be saved with recording information (Exif information), including its shutter 
speed, aperture and ISO sensitivity information.
1Select a 4K burst file ( ) on the playback screen, 
and press  3.
•
You can also perform the same operation by touching the 
icon [ ].
•The slide view screen for selecting pictures will be 
displayed. It takes a few seconds until the screen is 
displayed.
2Touch and drag the frames to...

6. Shutter and Drive Settings
192
•If the burst time was short, a smaller number of frames are displayed in slide view. [ ] 
and [ ] cannot be selected.
•During marker operation, you can skip to the markers that you added or the beginning or 
end of the 4K burst file. Press [Fn2] again to return to the or iginal operation.
•When you have selected frames that are not currently displayed  in slide view, such as 
when you have selected [ ] or [ ], it may take a few seconds unti l the slide view 
frames are...

193
6. Shutter and Drive Settings

•
If you perform no operations for approximately 2 seconds during continuous playback/
rewind, the on-screen indications will disappear. To display th e indications again, touch 
the screen.
3Press [MENU/SET] to save the picture.
•Pause the playback to perform th is operation when using the 4K burst playback screen.•Confirmation screen is displayed. It is executed when [Yes] is  selected.
Button 
operationTouch operationDescription of operation
3Continuous playback
4...

6. Shutter and Drive Settings
194
1Select a 4K burst file ( ) on the playback screen, 
and press 3.
•
You can also perform the same operation by touching the 
icon [ ].
•The slide view screen for selecting pictures will be 
displayed. It takes a few seconds until the screen is 
displayed.
2Touch and drag the frames to select the frame you want to save  as a picture.
•You can also perform the same operation by pressing 2/1.
3Press [MENU/SET] to save the picture.
•Confirmation screen is displayed. It is...

195
6. Shutter and Drive Settings
∫Selecting and saving pictures on the TV screen
•
When connecting to a TV that does not support 4K motion picture , select [AUTO].
Connect the camera and a TV with an HDMI micro cable, and displ ay the 
playback screen.  (P341)
•To select and save pictures when the camera is connected to a TV with an HDMI micro  cable, 
set [VIERA Link] in [TV Connection] to [OFF].
•If you connect the camera to a TV with an HDMI micro cable or A V cable (optional) and display 
4K burst...

6. Shutter and Drive Settings
196
∫To change the aspect ratio
Selecting [Aspect Ratio] in the [Rec] menu allows you to change  the aspect ratio for 4K 
photos.
∫ To record the subject with reduced blur
You can reduce the blur of the subject by setting a faster shutter speed.
1 Set the mode dial to  [ ].
2 Set the shutter speed by rotating the rear dial or the front di al.
∫ Shutter sound for 4K photo recording
When using [ ] (
[4K Burst]) or [ ] ([4K Pre-Burst]), recording is performed with the...

197
6. Shutter and Drive Settings
∫Limitations on the 4K Photo function
To optimize settings for 4K photo recording, certain limitations apply to some recording 
functions, menu items and other settings.
•
The following items are fixed to the settings indicated below:
¢ Settings in the [Motion Picture] menu are not applied to 4K bur st files recorded with the 4K 
Photo function.
•The following limitations apply to the recording functions indi cated below:
[Picture Size][4K] (8M)•Following picture sizes...

6. Shutter and Drive Settings
198
•The following menu items are disabled:
Applicable to [ ] ([4K Burst])/[ ] ([4K Burst(S/S)])/[ ] ([4K Pre-Burst])
Only [ ] ([4K Pre-Burst])
•When recording with the 4K Photo function, the [i.Resolution] s etting changes from 
[EXTENDED] to [LOW].
•When using the 4K Photo function, the [Stabilizer] setting chan ges from [ ] ([Panning]) to 
[ ] ([Normal]).
•When recording with the 4K Photo function, [Destination] in [Tr avel Date] cannot be recorded. •When recording with...

199
6. Shutter and Drive Settings
Taking Pictures using Auto Bracket
Applicable modes: 
Maximum of 7 pictures will be recorded with different exposure settings following the 
Exposure Compensation range every time the shutter button is pr essed.
With Auto Bracket
[Step]: [3 •1/3], [Sequence]: [0/ s/r ]
1Set the drive mode dial to [ ] .
2Focus on the subject and take a picture.
•If you press and hold the shutter button, the number of 
pictures that you set is taken.
•The Auto Bracket indication blinks...

6. Shutter and Drive Settings
200
∫Changing the settings for [Single/Burst Settings], [Step] and [ Sequence] in Auto 
Bracket
1Select the menu.  (P63)
2Press 3/4  to select [Single/Burst Settings], [Step] or [Sequence] and th en 
press [MENU/SET].
3Press  3/4  to select the setting and then press [MENU/SET].
•
You can take one picture at a time when set to [ ].•You can continuously take pictures up to set numbers when set t o [ ].
•Exit the menu after it is set.
•When taking pictures using Auto Bracket...