Panasonic Dmr E20 Operating Instructions Manual
Have a look at the manual Panasonic Dmr E20 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
56
RQT6035
Advanced operations
Using the direct navigator
Selecting programs to play
A list of programs is created as you record them. You can use this
list to find the programs you want to watch.
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
The program list appears.
The images for the currently highlighted list are played in the
background.
3Use...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-55.png "Page 56
56
RQT6035
Advanced operations
Using the direct navigator
Selecting programs to play
A list of programs is created as you record them. You can use this
list to find the programs you want to watch.
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
The program list appears.
The images for the currently highlighted list are played in the
background.
3Use...")
![Page 59
59
RQT6035
Advanced operations
Using the direct navigator
Entering and editing program
titles
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
3Use the joystick [, ] to select the
program whose title you want to enter
or edit.
4Use the joystick [] so the submenu
appears.
5Use the joystick [, ] to select
“Enter Title” and press [ENTER].
6Enter or...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-58.png "Page 59
59
RQT6035
Advanced operations
Using the direct navigator
Entering and editing program
titles
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
3Use the joystick [, ] to select the
program whose title you want to enter
or edit.
4Use the joystick [] so the submenu
appears.
5Use the joystick [, ] to select
“Enter Title” and press [ENTER].
6Enter or...")
![Page 60
60
RQT6035
Advanced operations
Using the direct navigator
Protecting programs
You can prevent accidental erasure of programs by write-protecting
them.
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
3Use the joystick [, ] to select the
program you want to protect.
4Use the joystick [] so the submenu
appears.
5Use the joystick [, ] to select
“Protection”...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-59.png "Page 60
60
RQT6035
Advanced operations
Using the direct navigator
Protecting programs
You can prevent accidental erasure of programs by write-protecting
them.
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
3Use the joystick [, ] to select the
program you want to protect.
4Use the joystick [] so the submenu
appears.
5Use the joystick [, ] to select
“Protection”...")
![Page 61
61
RQT6035
Advanced operations
Using the direct navigator
Releasing program
protection
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
3Use the joystick [, ] to select the
program you want to unprotect.
4Use the joystick [] so the submenu
appears.
5Use the joystick [, ] to select
“Protection” and press [ENTER].
6Use the joystick [, ] to select
“Yes”...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-60.png "Page 61
61
RQT6035
Advanced operations
Using the direct navigator
Releasing program
protection
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
3Use the joystick [, ] to select the
program you want to unprotect.
4Use the joystick [] so the submenu
appears.
5Use the joystick [, ] to select
“Protection” and press [ENTER].
6Use the joystick [, ] to select
“Yes”...")
![Page 62
62
RQT6035
Advanced operations
Using the direct navigator
Checking program contents
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
3Use the joystick [, ] to select the
program whose contents you want to
check.
4Use the joystick [] so the submenu
appears.
5Use the joystick [, ] to select
“Properties” and press [ENTER].
To return to the previous...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-61.png "Page 62
62
RQT6035
Advanced operations
Using the direct navigator
Checking program contents
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
3Use the joystick [, ] to select the
program whose contents you want to
check.
4Use the joystick [] so the submenu
appears.
5Use the joystick [, ] to select
“Properties” and press [ENTER].
To return to the previous...")
![Page 64
64
RQT6035
Advanced operations
Using the direct navigator
7Use search functions such as fast-
forward and slow-motion to find the
end point of the part you want to erase
and press [ENTER].
8Use the joystick [, ] to select
“Exit” and press [ENTER].
9Use the joystick [, ] to select
“Erase” and press [ENTER].
To stop partway throughPress [RETURN] or select “Cancel” and press [ENTER] in step 9.
To erase another part of the same programSelect “Next” after step 7 and press [ENTER], then repeat steps 9,
6...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-63.png "Page 64
64
RQT6035
Advanced operations
Using the direct navigator
7Use search functions such as fast-
forward and slow-motion to find the
end point of the part you want to erase
and press [ENTER].
8Use the joystick [, ] to select
“Exit” and press [ENTER].
9Use the joystick [, ] to select
“Erase” and press [ENTER].
To stop partway throughPress [RETURN] or select “Cancel” and press [ENTER] in step 9.
To erase another part of the same programSelect “Next” after step 7 and press [ENTER], then repeat steps 9,
6...")
![Page 65
65
RQT6035
Advanced operations
Using play lists to edit
programs
Displaying play lists
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “PLAY LIST” and press
[ENTER].
The play list screen appears. Scenes are not displayed if you
have not yet created a play list with the disc.
To clear the play list screen
Press [MENU, PLAY LIST] or [RETURN].
The screen returns to the state it was in before you...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-64.png "Page 65
65
RQT6035
Advanced operations
Using play lists to edit
programs
Displaying play lists
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “PLAY LIST” and press
[ENTER].
The play list screen appears. Scenes are not displayed if you
have not yet created a play list with the disc.
To clear the play list screen
Press [MENU, PLAY LIST] or [RETURN].
The screen returns to the state it was in before you...")
![Page 66
66
RQT6035
Advanced operations
Using play lists to edit programs
Creating play lists
You can specify start and end points to create a scene, then specify
the order in which these scenes are played. These scenes are not
recorded separately so this doesn’t use up much of the disc’s ca-
pacity.
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , ,
] to select “CREATE PLAY
LIST” and press [ENTER].
3Use search...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-65.png "Page 66
66
RQT6035
Advanced operations
Using play lists to edit programs
Creating play lists
You can specify start and end points to create a scene, then specify
the order in which these scenes are played. These scenes are not
recorded separately so this doesn’t use up much of the disc’s ca-
pacity.
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , ,
] to select “CREATE PLAY
LIST” and press [ENTER].
3Use search...")
61 RQT6035 Advanced operations Using the direct navigator Releasing program protection Preparation Switch [DVD, TV] to “DVD”. Insert a disc you have recorded on. 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to select “DIRECT NAVIGATOR” and press [ENTER]. 3Use the joystick [, ] to select the program you want to unprotect. 4Use the joystick [] so the submenu appears. 5Use the joystick [, ] to select “Protection” and press [ENTER]. 6Use the joystick [, ] to select “Yes” and press [ENTER]. To stop partway through In step 6, either select “No” and press [ENTER] or press [RETURN]. The padlock mark disappears. 4 5 6 2 3 1 RETURN TOP WINDOW ENTERENTER ENTER ENTER ENTER ENTERENTER ENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V. S . S . ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 DVD, TV 2·3·4· 5·6 1 N S DIRECT NAVIGATOR Enter Title Properties Protection Shorten Segment Erase Program 3 3 1 1 1 1 1 DIRECT NAVIGATOR No DATE CH TIME EDITTITLE110/21(SA)42000210/23(MO)61900USJ310/26(TH)C131600 ENTER RETURN0 ~ 9No Total03SELECT Protection Ye s No Cancel Program Protection. ENTERSELECT DIRECT NAVIGATOR No DATECH TIME EDITTITLE16/20 WED41000 AM 900 PM 1100 PMDinosaur USJSoccer26/20 WED6 36/20 WED13 3 3 1 1 1 1 1 ENTER0 ~ 9No TOTAL 3SELECT RETURN RETURN !? When you press [ENTER] TOP
62 RQT6035 Advanced operations Using the direct navigator Checking program contents Preparation Switch [DVD, TV] to “DVD”. Insert a disc you have recorded on. 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to select “DIRECT NAVIGATOR” and press [ENTER]. 3Use the joystick [, ] to select the program whose contents you want to check. 4Use the joystick [] so the submenu appears. 5Use the joystick [, ] to select “Properties” and press [ENTER]. To return to the previous screen Press [RETURN].The contents of the program are shown: Program number, recording date, channel, recording start time, length of recording and recording mode. 1 4 5 2 3 TOP WINDOW ENTERENTER ENTER ENTER ENTERENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH S TAT U S RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 2·3·4· 5 RETURN 1 DVD, TV 3 3 1 1 1 1 1 DIRECT NAVIGATOR No DATE CH TIME EDITTITLE110/21(SA)42000210/23(MO)61900USJ310/26(TH)C131600 ENTER RETURN0 ~ 9No Total03SELECT Enter Title Properties Protection Shorten Segment Erase Program Properties No. Date CH3 7/13/ 2001 TUE 12On 1:02 PM ENTER Soccer Time 0:01(SP) RETURN N S DIRECT NAVIGATOR TOP When you press [ENTER]
63
RQT6035
Advanced operations
Using the direct navigator
Erasing parts of a program—
Shorten Segment
1
4
5
6 2
3
TOP WINDOW
ENTERENTER
ENTER
ENTER
ENTER
ENTERENTER
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V. S . S .
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
100
1
2·3·4·
5·6
DVD, TV
Enter Title
Properties
Protection
Shorten Segment
Erase Program
Shorten
Segment
0 : 00 . 05Start– : – – . – –End3
StartEndNext
Exit
0 : 00 . 05
PLAY3
RETURN ENTER
SELECT
/
4
The specified parts of the program are erased completely
when you use this procedure and cannot be retrieved. Check
the program carefully to ensure it isn’t one you want to keep.
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to
select “DIRECT NAVIGATOR” and
press [ENTER].
3Use the joystick [, ] to select the
program which contains the part you
want to erase.
4Use the joystick [] so the submenu
appears.
5Use the joystick [, ] to select
“Shorten Segment” and press
[ENTER].
6Use search functions such as fast-
forward and slow-motion to find the
start point of the part you want to
erase and press [ENTER].
(Continued on next page)
N
S
DIRECT NAVIGATOR
TOP
64
RQT6035
Advanced operations
Using the direct navigator
7Use search functions such as fast-
forward and slow-motion to find the
end point of the part you want to erase
and press [ENTER].
8Use the joystick [, ] to select
“Exit” and press [ENTER].
9Use the joystick [, ] to select
“Erase” and press [ENTER].
To stop partway throughPress [RETURN] or select “Cancel” and press [ENTER] in step 9.
To erase another part of the same programSelect “Next” after step 7 and press [ENTER], then repeat steps 9,
6 and 7.
For your reference
You can respecify the start or end points. The points you specify
last are used.
You cannot specify an end point before a start point or a start point
after an end point.
You may not be able to specify start and end points within
3 seconds of each other.
You cannot specify start and end points if you have recorded still
pictures on other equipment.
The unit pauses play when the end of the program is reached dur-
ing this procedure.
The disc’s available recording time may not increase after erasing
short parts of programs.
You cannot erase parts of protected programs.
Play lists created with the erased part are also erased.
8 7
9
ENTER
ENTER
ENTER
ENTERENTER
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
S TAT U S
RETURN
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
100
ENTER7·8·9RETURN
0 : 00 . 05StartEnd3
StartEndNext
Exit
0 : 10 . 15
RETURN ENTER
SELECT
0 : 10 . 15
/
4
Shorten
Segment
3
3
2001
0 : 00 . 05StartEnd3
StartEndNext
Exit
0 : 10 . 15
RETURN ENTER
SELECT
0 : 10 . 15
/
4
Shorten
Segment
3
3
0 : 00 . 05StartEnd3
StartEndNext
Exit
0 : 10 . 15
RETURN ENTER
SELECT
0 : 10 . 15
/
4
Shorten
Segment
3
0:19 SP Remaining Recording Time
Shorten Segment
Corresponding PLAY LIST will also be erased.
Erase Cancel
RETURN
ENTERSELECT
0 : 00 . 05StartEnd3
StartEndNextExit
0 : 10 . 15
RETURN ENTER
SELECT
0 : 10 . 15
/
4
Shorten
Segment
3
3
65 RQT6035 Advanced operations Using play lists to edit programs Displaying play lists Preparation Switch [DVD, TV] to “DVD”. Insert a disc you have recorded on. 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to select “PLAY LIST” and press [ENTER]. The play list screen appears. Scenes are not displayed if you have not yet created a play list with the disc. To clear the play list screen Press [MENU, PLAY LIST] or [RETURN]. The screen returns to the state it was in before you called up the play list. What you can do with the play list screenCreate play lists (➡ page 66) Play play lists (➡ page 67) Select a scene to play (➡ page 68) Add, move, re-edit, and erase scenes (➡ pages 68–71) Copy play lists (➡ page 72) Erase play lists (➡ page 72) Give play lists titles (➡ page 73) Check a play list’s contents (➡ page 74) For your reference You can also display the play list by pressing [MENU, PLAY LIST]. About the play list scene screen Play list informationThis shows the play list number, date of creation (month/date), total play time, the number of scenes it contains, and title (if entered). Scenes 9 scenes can be shown on a page. Turning pages If there are more than nine scenes, use the joystick [, , , ] to select “ Prev.” or “Next ” and press [ENTER] to move to the previous page or next page. You can also enter the three digits with the numbered buttons (➡ page 8). MENUTSILYALP ENTERENTER 2 1 TOP WINDOW A 2 1 TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 RETURN MENU, PLAY LIST DVD, TV PLAY LIST Play Scenes 1 / 1 3 12/24 0:05 004 Dinosaur Prev. Next 001 00:00.19002003 004 ------ ------ --- a c b 0 ~ 9Select Page RETURN ENTER SELECT TOP PLAY LIST ------NoDATE TOTALSCENEEDIT TITLEAuto action USJ1 10/23 006 006 003 2 10/26 007 3 10/21 004006Dinosaur 3 3 1 1 1 1 1 1 002003 004 001 --- -- --/-- --:-- 0 ~ 9No RETURN ENTER SELECT PLAY LIST
66 RQT6035 Advanced operations Using play lists to edit programs Creating play lists You can specify start and end points to create a scene, then specify the order in which these scenes are played. These scenes are not recorded separately so this doesn’t use up much of the disc’s ca- pacity. Preparation Switch [DVD, TV] to “DVD”. Insert a disc you have recorded on. 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to select “CREATE PLAY LIST” and press [ENTER]. 3Use search functions such as fast-forward and slow-motion to find the start point of the scene and press [ENTER]. A thumbnail image of the start point appears. 4Use search functions such as fast-forward and slow-motion to find the end point of the scene and press [ENTER]. A thumbnail image of the end point appears. To specify another scene Select “Next” and press [ENTER], then repeat steps 3 and 4. 5Use the joystick [, ] to select “Exit” and press [ENTER]. The play lists screen appears. To stop partway throughPress [RETURN]. 1 2 5 3·4 TOP WINDOW ENTERENTER ENTERENTER ENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH S TAT U S RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 2·3·4· 5 1 DVD, TV RETURN PLAY LIST 0 : 00 . 05StartEnd3 Start 1 EndNext Exit Scene No. 0 : 00 . 05 RETURN ENTER SELECT --:--.-- PLAY LIST No.3 PLAY1 PLAY LIST 0 : 00 . 05StartEnd Start 1 EndNext Exit Scene No. 0 : 35 . 20 RETURN ENTER SELECT 0 : 35 . 20 33 PLAY LIST No.3 1 TOP CREATE PLAY LIST PLAY LIST 0 : 00 . 05StartEnd Start 1 EndNext Exit Scene No. 0 : 35 . 20 RETURN ENTER SELECT PLAY LIST No.3 1 33 0 : 35 . 20
67 RQT6035 Advanced operations Using play lists to edit programs To clear the play list screen Press [MENU, PLAY LIST]. The screen returns to the state it was in before you called up the play list. For your reference One disc can have a maximum of 99 play lists and 999 scenes. These limits may be reduced under some conditions. You can respecify the start or end points. The points you specify last are used. You cannot specify an end point before a start point or a start point after an end point. If you specify an end point but not a start point, the unit determines the beginning of the program as the start point. Similarly, if you specify a start point but not an end point, the unit determines the end of the program as the end point. You cannot specify start and end points if you have recorded still pictures on other equipment. The unit pauses play when the end of the last program on the disc is reached during this procedure. You cannot create or edit play lists if Disc Protection in DISC SETTING is On ( ➡ ➡➡ ➡ ➡ page 52). You can not create or edit play lists if the disc is protected with the write-protect tab. Release this before operation ( ➡ ➡➡ ➡ ➡ page 99). Playing play lists Preparation Switch [DVD, TV] to “DVD”. Insert a disc you created play lists on. 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to select “PLAY LIST” and press [ENTER]. 3Use the joystick [, ] to select the play list you want to play and press [ENTER]. All the scenes in the play list are played. To stop play list playPress [, STOP]. The play list appears. For your reference You can also display the play list screen by pressing [MENU, PLAY LIST] at step 1. You can fast-forward, rewind, pause, and slow-motion while play- ing scenes just as you can during normal play. You can also select play lists from the list in step 3 by entering a 2-digit number with the numbered buttons (➡ page 8) and pressing [ENTER]. If you enter a number larger than the total number of play lists, the last play list is selected. 2 3 1TOP WINDOW ENTERENTER ENTERENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V. S . S . ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 10 0 MENU, PLAY LIST 2·3 1 ∫, STOP DVD, TV You can display the play lists after the sixth one by moving the joystick []. TOP PLAY LIST PLAY LIST ------ Auto action USJ1 10/23 006 006 003 2 10/26 007 3 10/21 004006Dinosaur 3 3 1 1 1 1 1 1 002003 004 001 --- -- --/-- --:-- 0 ~ 9No RETURN ENTER SELECT NoDATE TOTALSCENEEDIT TITLE
68 RQT6035 Advanced operations Using play lists to edit programs Playing play list scenes Preparation Switch [DVD, TV] to “DVD”. Insert a disc you created play lists on. 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to select “PLAY LIST” and press [ENTER]. 3Use the joystick [, ] to select the play list that contains the scene you want to play and use the joystick []. 4Use the joystick [, ] to select “Play Scenes” and press [ENTER]. 5Use the joystick [, , , ] to select the scene you want to play and press [ENTER]. To stop scene playPress [, STOP]. The scene list appears. To show scene 10 and laterIn step 5, use the joystick [, , , ] to select “Next ” and press [ENTER]. For your reference You can fast-forward, rewind, pause, and slow-motion while play- ing scenes just as you can during normal play. You can also select a page of scenes in step 5 by entering a 3-digit number with the numbered buttons (➡ page 8) and pressing [ENTER]. Editing play list scenes Preparation Switch [DVD, TV] to “DVD”. Insert a disc you created play lists on. 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to select “PLAY LIST” and press [ENTER]. (Continued on next page) PLAY LIST The scene you select is played. PLAY LIST TOP TOP 1 2 4 5 3 TOP WINDOW ENTERENTER ENTERENTER ENTER ENTERENTER ENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 2·3·4· 5 1 DVD, TV ∫, STOP Edit Scenes PL Copy PL Erase Enter Title Properties Play Scenes PLAY LIST Play Scenes 1 / 1 3 12/24 0:05 004 Dinosaur Prev. Next 001 00:00.19002003 004 ------ ------ --- 0 ~ 9Select Page RETURN ENTER SELECT Numbered buttons
69 RQT6035 Advanced operations Using play lists to edit programs 3Use the joystick [, ] to select the play list you want to edit and use the joystick []. 4Use the joystick [, ] to select “Edit Scenes” and press [ENTER]. Adding scenes to a play list Preparation Do steps 1 to 4 of “Editing play list scenes” (➡ page 68 and above). 5Use the joystick [, ] to select “Add” and press [ENTER]. 6Use the joystick [, , , ] to select the scene after the position you want to add the scene and press [ENTER]. 7Use search functions such as fast- forward and slow-motion to find the start point of the scene and press [ENTER]. 8Use search functions such as fast- forward and slow-motion to find the end point of the scene and press [ENTER]. 9Use the joystick [, ] to select “Exit” and press [ENTER]. The screen from step 5 reappears. To stop partway through Press [RETURN]. To add other scenes Use the joystick [, ] after step 8 to select “Next” and press [ENTER]. Repeat steps 7 and 8. 3 4 5 6 9 7·8 ENTER ENTER ENTERENTER ENTER ENTERENTER ENTER ENTER ENTER ENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 3·4· 5·6·7· 8·9 RETURN Edit Scenes PL Copy PL Erase Enter Title Properties Play Scenes PLAY LIST Edit Scenes 0 ~ 9Select Page 1 / 1 3 10/21 0:02 004 Dinosaur Prev. Next AddMoveRe-editErase RETURN ENTER SELECT--------- --- 002003 004--- 001 00:00.19 PLAY LIST Add Scenes 0 : 00 . 05StartEnd3 Start 1 EndNext Exit Scene No. 0 : 00 . 05 RETURN ENTER SELECT --:--.-- PLAY1 PLAY LIST No.3 Dinosaur
70 RQT6035 Advanced operations Using play lists to edit programs Preparation Do steps 1 to 4 of “Editing play list scenes” (➡ pages 68 and 69). Moving a scene 5Use the joystick [, ] to select “Move” and press [ENTER]. 6Use the joystick [, , , ] to select the scene you want to move and press [ENTER]. 7Use the joystick [, , , ] to select the scene currently in the posi- tion to which you want to move the scene to and press [ENTER]. To move another sceneRepeat steps 6 and 7. To re-edit a play list scene 5Use the joystick [, ] to select “Re-edit” and press [ENTER]. 6Use the joystick [, , , ] to select the scene you want to re-edit and press [ENTER]. (Continued on next page) The scene you selected in step 6 moves to the position in front of the scene selected. 5 6·7 ENTER ENTER ENTER ENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 5·6·7 PLAY LIST Edit Scenes 0 ~ 9Select Page 1 / 1 3 10/21 0:02 004 Dinosaur Prev. Next AddMoveRe-editErase RETURN ENTER SELECT--------- --- 002003 004--- 001 00:00.19 PLAY LIST Edit Scenes 0 ~ 9Select Page 3 10/21 0:02 004 Dinosaur AddMoveRe-editErase --- 001003 004--- 002 00:00.12 PLAY LIST Edit Scenes 0 ~ 9Select Page 3 10/21 0:02 004 Dinosaur AddMoveRe-editErase --- 001002003 004 00:00.09--- PLAY LIST Edit Scenes 0 ~ 9Select Page 3 10/21 0:02 004 Dinosaur AddMoveRe-editErase --- 002003 004--- 001 00:00.19 PLAY LIST Edit Scenes 0 ~ 9Select Page 3 10/21 0:02 004 Dinosaur AddMoveRe-editErase --- 001003 004--- 002 00:00.12Selected sceneSelected scene