Panasonic Dmr E20 Operating Instructions Manual

							81
RQT6035
Home Theater
Expanding your home theater system
Operating other Panasonic
DVD equipment with
the remote control
By changing the remote control code, you can operate other DVD
recorders and players manufactured by Panasonic.
Most of the DVD recorders and players manufactured by Panasonic
use the same system for their remote controls, so if you operate
them in the same place, the controls can be confused by the differ-
ent pieces of equipment. Use the following procedure to change the
remote control code to solve this problem.
Use “1”, the factory set code, under normal circumstances.
Be sure to set the same remote control code on the main unit as you
did for the remote control itself (➡ page 82, ACTION—Set Up—
Remote Control Code).
Preparation
Switch [DVD, TV] to “DVD”.
Change the code on the main unit.
Press [, POWER] and the numbered but-
tons corresponding to the code you want
to set, [1], [2], or [3], at the same time.
Note
The following display appears on the unit’s display if its code and
the remote control’s code are different. Change the remote con-
trol’s code to suit the unit.
The display disappears after about 5 seconds. The unit’s remote control code
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V. S . S .
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
S TAT U S
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
POWER123
DVD, TV
POWER
Í
Numbered
buttons
!? 
						

							82
RQT6035
Initial settings
Changing the unit’s settings
Summary of settings
This chart shows the initial settings for this unit. See page 85 for details on menu operation.
Underlined items are the factory presets.
Options
2 hr6 hrOff
Set Code 1Set Code 2Set Code 3
101
TVCATV
YesNo
EnglishFrenchSpanish
OriginalOther 

AutomaticEnglishFrench
SpanishOther 

EnglishFrenchSpanishOther 
Setting ratings (When level 8 is selected)
8 No Limit: All DVD-Video can be played.
1 to 7: Prohibits play of DVD-Video with
corresponding ratings recorded on
them.
0 Lock All: Prohibits play of all DVD-Video.
Changing ratings
(When level 0–7 is selected)
Unlock RecorderChange Level
Change PasswordTemporary Unlock

OnOff
AutomaticFixed
AutomaticFieldFrame
LighterDarker
OnOff
Menus
Off TimerSelect how long the unit remains on when it is not being used.
Remote Control Code
Change the remote control code so you can use other Panasonic
DVD equipment at the same time.
Clock Settings
Auto Clock Setting (➡ page 87)
The unit adjusts the clock automatically.
Manual Clock Setting (➡ page 88)
You can adjust the clock.
Time Zone Adjust (➡ page 89)
Adjust the time zone if it was not set correctly after auto clock setting.
This appears only after auto clock setting is complete.
Channel Settings
Antenna System (➡ page 90)
Select to suit the type of antenna you are using. Channels are set
corresponding to the antenna system you select.
Auto Channel Setting (➡ page 91)
The unit sets the channels automatically.
Preset Channel Caption
Manual Channel Caption (➡ page 92)
Give captions to the channels.
VCR Plus	 CH Setting (➡ page 19)
Set the guide channels for use with VCR Plus timer recording.
Re-initialize Setting
This returns all values in the ACTION menus, except for the clock,
channels, ratings level, and display language, to the default settings.
Audio (➡ page 84)
Choose the preferred audio language.
Subtitle (➡ page 84)
Choose the preferred subtitle language.
Menus (➡ page 84)
Choose the preferred language for disc menus.
Ratings (➡ page 86)
Set a ratings level to limit DVD-Video play.
3-D Y/C Separation (➡ page 84)Turn 3-D Y/C separation on or off.
Hybrid VBR Resolution (➡ page 84)
Switch between automatic and fixed hybrid VBR resolution when
recording.
Still Mode (➡ page 84)
Select the type of picture shown when you pause play.
Black Level Control (➡ page 84)
Change the black level of the picture.
Seamless Play (➡ page 84)
Turn seamless play on or off on discs with play lists.
Main menus
Set Up
Disc


Video
!?
!? 
						

							83
RQT6035
Initial settings
Options
OnOff
OnOff
MainSAP
OnOff
BitstreamPCM
BitstreamOff
AutomaticOff
OnOff
EnglishFrançais
BrightDimDim during DVD/VCD Play

4:316:9
Pan&ScanLetterbox
4:3Pan&ScanLetterbox
Menus
Audio during Search 
	
	

Choose whether to have sound during the first level of fast-forward.
D. Range Compression 
 (Dolby Digital only)
Change the dynamic range for late night viewing.
MTS Selection for DVD-R Disc (➡ page 35)
Select whether to record the main or secondary audio type (SAP)
to DVD-R.
PCM Down Conversion (➡ page 86)
Choose whether to convert 96-kHz LPCM signals to 48-kHz/16 bit.
Dolby Digital (➡ page 86)
Choose whether to output Dolby Digital bitstream signals for decoding on
other equipment or to convert them to PCM signals for 2-channel output.
DTS (➡ page 86)
Choose whether to output DTS bitstream signals for decoding on other
equipment or to not output signals at all.
Status Messages
Choose whether to show on-screen messages automatically
or not.
Blue Background
Select “Off” if you do not want to have the unit show the
blue background when reception is weak.
Language of Display Message
Choose the preferred language for these menus and the on-screen
messages.
FL Display (➡ page 84)
Changes the brightness of the unit’s display.
TV Aspect (➡ page 21)
Choose the setting to suit your television.
4:3 TV Settings for DVD-Video (➡ page 84)
Select how video from DVD-Video is shown on a 4:3
standard aspect television.
4:3 TV Settings for DVD-RAM (➡ page 84)
Select how video from DVD-RAM is shown on a 4:3
standard aspect television.
Main menus
Audio
Display
TV Screen
!?
!?
!?
!?
!?
!?
!? 
						

							84
RQT6035
Initial settings
Disc—Audio, Subtitle and Menus 

Original:The original language of each disc will be selected.
Other :Input a code number with the numbered buttons
(➡ see below).
Automatic:If the language selected for “Audio” is not available,
subtitles of that language will automatically appear
if available on that disc.
Some discs are designed to start in a certain language despite any
changes you make here.
Video—3-D Y/C Separation
On:Reduces noise for recording by separating the luminance (Y)
and color (C) signals received from the television station.
Off:Reduces the ghosting that occurs when recording fast moving
images.
Video—Hybrid VBR ResolutionAutomatic:The unit automatically switches resolution rates during
recording. The unit reduces block noise, which occurs
during MPEG compression, by selecting the optimum
rate.
Fixed:The resolution rate is fixed during recording. This en-
sures the resolution rate is not reduced.
Video—Still ModeField:Less blurred field stills are shown. Select if jittering occurs
when “Automatic” is selected.
Frame:Sharper frame stills are shown. Select if small text or fine
patterns cannot be seen clearly when “Automatic” is
selected.
Language code list
Abkhazian: 6566
Afar: 6565
Afrikaans: 6570
Albanian: 8381
Ameharic: 6577
Arabic: 6582
Armenian: 7289
Assamese: 6583
Aymara: 6588
Azerbaijani: 6590
Bashkir: 6665
Basque: 6985
Bengali; Bangla: 6678
Bhutani: 6890
Bihari: 6672
Breton: 6682
Bulgarian: 6671
Burmese: 7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765Chinese: 9072
Corsican: 6779
Croatian: 7282
Czech: 6783
Danish: 6865
Dutch: 7876
English: 6978
Esperanto: 6979
Estonian: 6984
Faroese: 7079
Fiji: 7074
Finnish: 7073
French: 7082
Frisian: 7089
Galician: 7176
Georgian: 7565
German: 6869
Greek: 6976
Greenlandic: 7576
Guarani: 7178
Gujarati: 7185Hausa: 7265
Hebrew: 7387
Hindi: 7273
Hungarian: 7285
Icelandic: 7383
Indonesian: 7378
Interlingua: 7365
Irish: 7165
Italian: 7384
Japanese: 7465
Javanese: 7487
Kannada: 7578
Kashmiri: 7583
Kazakh: 7575
Kirghiz: 7589
Korean: 7579
Kurdish: 7585
Laotian: 7679
Latin: 7665
Latvian, Lettish: 7686
Lingala: 7678Lithuanian: 7684
Macedonian: 7775
Malagasy: 7771
Malay: 7783
Malayalam: 7776
Maltese: 7784
Maori: 7773
Marathi: 7782
Moldavian: 7779
Mongolian: 7778
Nauru: 7865
Nepali: 7869
Norwegian: 7879
Oriya: 7982
Pashto, Pushto: 8083
Persian: 7065
Polish: 8076
Portuguese: 8084
Punjabi: 8065
Quechua: 8185
Rhaeto-Romance: 8277Telugu: 8469
Thai: 8472
Tibetan: 6679
Tigrinya: 8473
Tonga: 8479
Turkish: 8482
Turkmen: 8475
Twi: 8487
Ukrainian: 8575
Urdu: 8582
Uzbek: 8590
Vietnamese: 8673
Volapük: 8679
Welsh: 6789
Wolof: 8779
Xhosa: 8872
Yiddish: 7473
Yoruba: 8979
Zulu: 9085 Romanian: 8279
Russian: 8285
Samoan: 8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese: 8373
Slovak: 8375
Slovenian: 8376
Somali: 8379
Spanish: 6983
Sundanese: 8385
Swahili: 8387
Swedish: 8386
Tagalog: 8476
Tajik: 8471
Tamil: 8465
Tatar: 8484
Changing the unit’s settings
Summary of settings
Video—Black Level Control
Lighter:when connected to a TV through the VIDEO OUT or S
VIDEO OUT terminal.
Darker:when connected to a TV through the COMPONENT
VIDEO OUT (Y/P
B/PR) terminals.
Video—Seamless PlayOn:The scenes in play lists created with this unit are played seam-
lessly. This may cause shifting of the points where scenes
change. Some play lists cannot be played seamlessly.
Off:The points where scenes in play lists are played accurately, but
this may cause the picture to freeze for a moment when scenes
change.
Display—FL DisplayDim during DVD/VCD play:The unit’s display dims during play of
discs with video recorded. (The TIME
SLIP indicator is off while the display
is dimmed.)
TV Screen—4:3 TV Settings for DVD-VideoPan&Scan:Video recorded for a widescreen is played with the
sides cut off if the pan & scan was specified by the
producer of the disc. 16:9 software prohibited from be-
ing shown in the pan and scan style will appear in the
letterbox style (with black bands above and below the
picture) despite the setting here.
Letterbox:Video recorded for a widescreen is played in the letter-
box style.
TV Screen—4:3 TV Settings for DVD-RAM4:3:Programs played as recorded.
Pan&Scan:Video recorded for a widescreen is played as pan &
scan.
Letterbox:Video recorded for a widescreen is played in the letter-
box style. 
						

							85
RQT6035
Initial settings
Changing the unit’s settings
Common procedures
Refer to the summary of settings table on page 82 and use the
following procedure to change the settings if necessary.
Preparation
Switch [DVD, TV] to “DVD”.
1While stopped
Press [ACTION] to show the menus.You can also press [TOP WINDOW] and use the joystick
[
, , , 
] to select “ACTION” and press [ENTER].

Menus
The Action menu is made up of six menus—Set Up, Disc,
Video, Audio, Display, and TV Screen. Select the menu’s
tab to display the items.
Items
A list of items in the menu you selected.
Options
This shows the current settings. The options are shown
when you select an item.
2Use the joystick [, 
] to select the
menu’s tab.
3Use the joystick [
, ] to select the
item you want to change and press
[ENTER].
4Use the joystick [
, ] to select the
option and press [ENTER].
Some options require different operations. Follow the on-
screen instructions and the instructions described later.
To return to the previous screenPress [RETURN]. Even if you have changed an option, the change
is not accepted unless you press [ENTER].
When you are finished
Press [ACTION].
For your reference
The unit retains these settings in its memory until you change them,
even if you turn it off.
1
2
3·4ACTION
ENTER
ENTER
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
ENTER
RETURN
DVD, TV
1 1·2·3·4
1
TOP
Set Up
TA B SELECT
Off TimerRemote Control CodeClock SettingsChannel Settings
Re-initialize Setting6 hr
Set Code 1
ACTION
ENTER    RETURN
1
3
2 
						

							86
RQT6035
Initial settings
Entering a password
You can limit play of DVDs unsuitable for some audiences. Play and
changes to the settings are not possible unless you enter a
password.
When setting ratings
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons.
If you enter a wrong number, press [CANCEL] to erase it before
you press [ENTER].
Do not forget your password.
2. Press [ENTER].
3. Press [ENTER].
The password is entered and the unit is locked.
Changing the unit’s settings
Now, when you insert a DVD-Video that exceeds the ratings
limit you set, a message appears on the television.
Follow the on-screen instructions.
Digital output
Change these settings when you have connected equipment
through this unit’s OPTICAL DIGITAL AUDIO OUT terminal.
PCM Down Conversion
Off (factory setting):
When you have used audio cables to connect the unit to other
equipment (analog connection 
 ➡ page 78).
On:
When you have used an optical digital cable to connect the unit to
other equipment (digital connection 
 ➡ page 78). Output is limited
to 48 kHz/16 bit.
Output of audio with a sampling frequency of 96 kHz
Audio is output as follows in accordance with the connections and
settings you make.
Connection
Setting
Off
On


(analog)
Output as 96 kHz
Converted and output
as 48 kHz


(digital)
No output1
Converted and outputas 48 kHz/16 bit
196 kHz audio is output if the DVD is unprotected, but the connect-
ed equipment must be able to handle such signals in order to play
them.
Dolby Digital
Bitstream (Factory preset):
When you have connected a unit with a built-in Dolby Digital
decoder.
PCM:
When you have connected a unit that doesn’t have a built-in Dolby
Digital decoder.
2
DTS
Off (Factory preset):
When you have connected a unit that doesn’t have a built-in DTS
decoder.
2
Bitstream:
When you have connected a unit with a built-in DTS decoder.
2Set “Dolby Digital” to “PCM” and “DTS” to “Off” if the other equip-
ment doesn’t have decoders. Incorrect settings can cause noise
to be output which can be harmful to your ears and speakers, and
audio will not be recorded properly to digital recording equipment.
ACTION
No.0 - 9
RETURN
Ratings
Enter a 4 digit password,
then press ENTER
Password✱✱✱✱
ACTIONRatings
Unlock Recorder
Change Password
Change Level
Temporary Unlock
RETURN ENTER
SELECT
When changing ratings
The password screen is shown when you select “Ratings”.
1. Input your 4-digit password with the numbered buttons and press
[ENTER].
Unlock Recorder:To unlock the unit and return the rating to 8
Change Password:To change your password
Change Level:To change the rating level
Temporary Unlock:To temporarily unlock the unit (the unit
locks again if you switch it to standby or
open the disc tray)
2. Select the item with the joystick [
,] and press [ENTER].
Actual screens depend on the operation. Follow the on-screen
instructions.
!? 
						

							87
RQT6035
Initial settings
Changing the unit’s settings
PreparationSwitch [DVD, TV] to “DVD”.
Clock Settings
Auto Clock Setting
1While stopped
Press [ACTION].The ACTION screen appears.
2Use the joystick [, 
] to select the
Set Up tab.
3Use the joystick [
, ] to select
“Clock Settings” and press [ENTER].
4Use the joystick [
, ] to select “Auto
Clock Setting” and press [ENTER].
If channel setting is complete, the “Auto Clock Setting” screen appears.If you have not yet set channels, the “Auto Channel/Clock Setting” screen appears.
5Press [ENTER].Auto clock setting (or auto channel and auto clock setting) starts. This
can take some time, up to a few hours in some cases. The following
screen appears when setting is complete.
Check that the time was set correctly. If it was not, use manual clock
setting (➡ page 88) or time zone adjust (➡ page 89) to correct it.
If you connect the unit through a cable TV box or DSS receiver
(➡ page 76), tune to your local PBS station before starting auto clock
setting. Use manual clock setting (➡ page 88) if this does not work.
If there is no local PBS channel in your area, then auto clock setting
may not work correctly.
In this case the time must be set manually (➡ page 88).
NoteDST, Daylight Saving Time, shows the summertime setting (➡ page 88).
TIME ZONE shows the time difference from Greenwich meantime (GMT) (➡ page 88).ESTGMT 5, CSTGMT 6, MSTGMT 7, PSTGMT 8,
ASTGMT 9, HSTGMT 10.
For other areas: xx hr

When you change the time zone, the recording times for programs recorded before
the time zone was changed also change to correspond to the new time zone.
To stop auto clock settingPress [RETURN].
1
2
3·4
5
ACTION
ENTER
ENTERENTER
ENTER
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V. S . S .
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
S TAT U S
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
DVD, TV
2·3·4·5RETURN
1
!?
Set Up
SELECT
Off TimerRemote Control CodeClock SettingsChannel Settings
Re-initialize Setting6 hr
Set Code 1
ACTION
TA B
Set Up
SELECT
Off TimerRemote Control CodeClock SettingChannel Setting
Re-initialize Setting6 hr
Set Code 1
ACTIONClock Settings
Auto Clock Setting
Manual Clock Setting
Time Zone Adjust
Auto Clock Setting
Connect antenna cable and if you use a
cable box, tune it to your local PBS CH
then...
Please push the ENTER key.
Auto Clock Setting
12:15 AM
  ON 6/7/2001
DST..............
TIME ZONE..... CST
Auto Clock Setting is complete.
TOP
When you press [ENTER] 
						

							88
RQT6035
Initial settings
Changing the unit’s settings
Preparation
Switch [DVD, TV] to “DVD”.
Clock Settings
Manual Clock Setting
1Press [ACTION].The ACTION screen appears.
2Use the joystick [, 
] to select the
Set Up tab.
3Use the joystick [
, ] to select
“Clock Settings” and press [ENTER].
4Use the joystick [
, ] to select
“Manual Clock Setting” and press
[ENTER].
5Use the joystick [, 
] to select the
item you want to change and use the
joystick [
, ] to change the setting.
The items change as follows:
MONTH
DAY
YEAR
HOUR
TIME ZONE
DST
MINUTE
HOUR: 12-hour display
DST (Daylight Saving Time): ON or OFF
If you select “ON”, the clock is advanced one hour starting
at 2 a.m. on the first Sunday in April and ending at 2 a.m.
on the last Sunday in October.
TIME ZONE:
EST
CST
MST
PST
AST
HST
(5) (6) (7) (8) (9) (10)

Repeat step 5 as necessary.
6Press [ENTER].The “Clock Settings” screen (➡ step 4) reappears and the
clock starts.
Note
When you change the time zone, the recording times for programs
recorded before the time zone was changed also change to corre-
spond to the new time zone.
1
2
5
6
3·4
ACTION
ENTER
ENTER
ENTERENTER
ENTER
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
2·3·4·5·6
1DVD, TV
Set Up
SELECT
Off TimerRemote Control CodeClock SettingsChannel Settings
Re-initialize Setting6 hr
Set Code 1
ACTION
TA B
Set Up
SELECT
Off TimerRemote Control CodeClock SettingChannel Setting
Re-initialize Setting6 hr
Set Code 1
ACTION
ENTER    RETURN
Clock Settings
Auto Clock Setting
Manual Clock Setting
Time Zone Adjust
Set Up
SELECT
Off TimerRemote Control CodeClock SettingChannel Setting
Re-initialize Setting6 hr
Set Code 1
ACTION
ENTER    RETURN
Manual Clock Setting
2001THU PM: 1736 7 5
MONTHMINUTEHOUR
OFF
TIME ZONEDST
YEARDAY
CSTSELECT
 RETURNENTER
--- ---
!?TOP 
						

							89
RQT6035
Initial settings
Changing the unit’s settings
Time Zone Adjust
Adjust the time zone (1 or 1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.
1Press [ACTION].The ACTION screen appears.
2Use the joystick [, 
] to select the
Set Up tab.
3Use the joystick [
, ] to select
“Clock Settings” and press [ENTER].
4Use the joystick [
, ] to select
“Time Zone Adjust” and press
[ENTER].
5Use the joystick [
, ] to select
“1”, “0”, or “	1” and press
[ENTER].
The “Clock Settings” screen (➡ step 4) reappears.
1
2
3·4·5
ACTION
ENTER
ENTERENTER
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V. S . S .
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
2·3·4·5
1
Set Up
SELECT
Off Timer
Remote Control Code
Clock Settings
Channel Settings
Re-initialize Setting6 hr
Set Code 1
ACTION
TA B
Set Up
SELECT
Off TimerRemote Control CodeClock SettingChannel Setting
Re-initialize Setting6 hr
Set Code 1
ACTION
ENTER    RETURN
Clock Settings
Auto Clock Setting
Manual Clock Setting
Time Zone Adjust
Set Up
SELECT
Off TimerRemote Control CodeClock SettingChannel Setting
Re-initialize Setting6 hr
Set Code 1
ACTION
ENTER    RETURN
Time Zone Adjust
-1
0
+1
TOP
When you press [ENTER] 
						

							90
RQT6035
Initial settings
Changing the unit’s settings
Preparation
Switch [DVD, TV] to “DVD”.
Channel Settings
Antenna System
The following settings must be reset when you change the antenna
system.
VCR Plus
 guide channel settings (➡ page 19)
Auto channel setting (➡ page 91)
Channel captions (➡ page 92)
1Press [ACTION].The ACTION screen appears.
2Use the joystick [, ] to select the
Set Up tab.
3Use the joystick [, ] to select
“Channel Settings” and press
[ENTER].
4Use the joystick [, ] to select
“Antenna System” and press
[ENTER].
5Use the joystick [, ] to select “TV”
or “CATV” and press [ENTER].
TV:TV broadcast (2CH – 69CH)
CATV:CATV broadcast (1CH – 125CH)
The screen shown in step 4 reappears.
1
2
3·4·5
ACTION
ENTER
ENTERENTER
TV
CH
TV/AV
PROG / CHECK
TOP WINDOWFRAME
SKIP
STOP
VCR Plus +
REC
TIME SLIP CM SKIP
V.S.S.
ACTIONTV DV D
AUDIOADD/DLT
REC MODECANCELINPUT
SELECT
LAST
MARKER
MARKER
WRITE
CHDVD
123
456
789
0
PAUSE PLAY
SLOW/SEARCH
STATUS
RETURNENTER
VOLPOWER
POWER
OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU
DISPLAYTSILYALP
 100
2·3·4·5
1DVD, TV
Antenna System
Auto Channel Setting
Preset Channel CaptionChannel Caption
Manual Channel Caption
VCR Plus+ CH SettingCATV
ACTIONChannel Settings
SELECT
ENTER    RETURN
Set Up
SELECT
Off TimerRemote Control CodeClock SettingsChannel Settings
Re-initialize Setting6 hr
Set Code 1
ACTION
ENTER    RETURN
TA B
TOP
Set Up
SELECT
Off TimerRemote Control CodeClock SettingChannel Setting
Re-initialize Setting6 hr
Set Code 1
ACTION
ENTER    RETURN
Antenna System
TV
CATV