Panasonic Dmr E20 Operating Instructions Manual
Have a look at the manual Panasonic Dmr E20 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
66
RQT6035
Advanced operations
Using play lists to edit programs
Creating play lists
You can specify start and end points to create a scene, then specify
the order in which these scenes are played. These scenes are not
recorded separately so this doesn’t use up much of the disc’s ca-
pacity.
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , ,
] to select “CREATE PLAY
LIST” and press [ENTER].
3Use search...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-65.png "Page 66
66
RQT6035
Advanced operations
Using play lists to edit programs
Creating play lists
You can specify start and end points to create a scene, then specify
the order in which these scenes are played. These scenes are not
recorded separately so this doesn’t use up much of the disc’s ca-
pacity.
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you have recorded on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , ,
] to select “CREATE PLAY
LIST” and press [ENTER].
3Use search...")
![Page 67
67
RQT6035
Advanced operations
Using play lists to edit programs
To clear the play list screen
Press [MENU, PLAY LIST].
The screen returns to the state it was in before you called up the
play list.
For your reference
One disc can have a maximum of 99 play lists and 999 scenes.
These limits may be reduced under some conditions.
You can respecify the start or end points. The points you specify
last are used.
You cannot specify an end point before a start point or a start point
after an end point.
If...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-66.png "Page 67
67
RQT6035
Advanced operations
Using play lists to edit programs
To clear the play list screen
Press [MENU, PLAY LIST].
The screen returns to the state it was in before you called up the
play list.
For your reference
One disc can have a maximum of 99 play lists and 999 scenes.
These limits may be reduced under some conditions.
You can respecify the start or end points. The points you specify
last are used.
You cannot specify an end point before a start point or a start point
after an end point.
If...")
![Page 68
68
RQT6035
Advanced operations
Using play lists to edit programs
Playing play list scenes
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you created play lists on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to select
“PLAY LIST” and press [ENTER].
3Use the joystick [, ] to select the
play list that contains the scene you
want to play and use the joystick [].
4Use the joystick [, ] to select “Play
Scenes” and press [ENTER].
5Use the joystick [, , , ] to
select...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-67.png "Page 68
68
RQT6035
Advanced operations
Using play lists to edit programs
Playing play list scenes
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you created play lists on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to select
“PLAY LIST” and press [ENTER].
3Use the joystick [, ] to select the
play list that contains the scene you
want to play and use the joystick [].
4Use the joystick [, ] to select “Play
Scenes” and press [ENTER].
5Use the joystick [, , , ] to
select...")
![Page 69
69
RQT6035
Advanced operations
Using play lists to edit programs
3Use the joystick [, ] to select the
play list you want to edit and use the
joystick [].
4Use the joystick [, ] to select “Edit
Scenes” and press [ENTER].
Adding scenes to a play list
Preparation
Do steps 1 to 4 of “Editing play list scenes” (➡ page 68 and above).
5Use the joystick [, ] to select
“Add” and press [ENTER].
6Use the joystick [, , , ] to
select the scene after the position you
want to add the scene and press...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-68.png "Page 69
69
RQT6035
Advanced operations
Using play lists to edit programs
3Use the joystick [, ] to select the
play list you want to edit and use the
joystick [].
4Use the joystick [, ] to select “Edit
Scenes” and press [ENTER].
Adding scenes to a play list
Preparation
Do steps 1 to 4 of “Editing play list scenes” (➡ page 68 and above).
5Use the joystick [, ] to select
“Add” and press [ENTER].
6Use the joystick [, , , ] to
select the scene after the position you
want to add the scene and press...")
![Page 70
70
RQT6035
Advanced operations
Using play lists to edit programs
Preparation
Do steps 1 to 4 of “Editing play list scenes” (➡ pages 68 and 69).
Moving a scene
5Use the joystick [, ] to select
“Move” and press [ENTER].
6Use the joystick [, , , ] to
select the scene you want to move
and press [ENTER].
7Use the joystick [, , , ] to
select the scene currently in the posi-
tion to which you want to move the
scene to and press [ENTER].
To move another sceneRepeat steps 6 and 7.
To re-edit a play...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-69.png "Page 70
70
RQT6035
Advanced operations
Using play lists to edit programs
Preparation
Do steps 1 to 4 of “Editing play list scenes” (➡ pages 68 and 69).
Moving a scene
5Use the joystick [, ] to select
“Move” and press [ENTER].
6Use the joystick [, , , ] to
select the scene you want to move
and press [ENTER].
7Use the joystick [, , , ] to
select the scene currently in the posi-
tion to which you want to move the
scene to and press [ENTER].
To move another sceneRepeat steps 6 and 7.
To re-edit a play...")
![Page 71
71
RQT6035
Advanced operations
Using play lists to edit programs
7Use search functions such as fast-
forward and slow-motion to find the
start point of the scene and press
[ENTER].
8Use search functions such as fast-
forward and slow-motion to find the
end point of the scene and press
[ENTER].
9Use the joystick [, ] to select
“Exit” and press [ENTER].
To re-edit another scene
Use the joystick [, ] after step 8 to select “Prev.” or “Next”
and press [ENTER] until you find the scene you want to...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-70.png "Page 71
71
RQT6035
Advanced operations
Using play lists to edit programs
7Use search functions such as fast-
forward and slow-motion to find the
start point of the scene and press
[ENTER].
8Use search functions such as fast-
forward and slow-motion to find the
end point of the scene and press
[ENTER].
9Use the joystick [, ] to select
“Exit” and press [ENTER].
To re-edit another scene
Use the joystick [, ] after step 8 to select “Prev.” or “Next”
and press [ENTER] until you find the scene you want to...")
![Page 72
72
RQT6035
Advanced operations
Using play lists to edit programs
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you created play lists on.
Copying play lists
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to se-
lect “PLAY LIST” and press [ENTER].
3Use the joystick [, ] to select the
play list you want to copy and then
use the joystick [].
4Use the joystick [, ] to select
“PL Copy” and press [ENTER].
5Use the joystick [, ] to select
“Copy” and press [ENTER].
The...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-71.png "Page 72
72
RQT6035
Advanced operations
Using play lists to edit programs
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you created play lists on.
Copying play lists
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to se-
lect “PLAY LIST” and press [ENTER].
3Use the joystick [, ] to select the
play list you want to copy and then
use the joystick [].
4Use the joystick [, ] to select
“PL Copy” and press [ENTER].
5Use the joystick [, ] to select
“Copy” and press [ENTER].
The...")
![Page 73
73
RQT6035
Advanced operations
Using play lists to edit programs
4Use the joystick [, ] to select
“PL Erase” and press [ENTER].
5Use the joystick [, ] to select
“Erase” and press [ENTER].
The play list is erased.
To stop partway through
In step 5, either select “Cancel” and press [ENTER] or press
[RETURN].
Titling play lists
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you created play lists on.
While stopped
Press [TOP WINDOW].
Use the joystick [, , , ] to
select “PLAY LIST”...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-72.png "Page 73
73
RQT6035
Advanced operations
Using play lists to edit programs
4Use the joystick [, ] to select
“PL Erase” and press [ENTER].
5Use the joystick [, ] to select
“Erase” and press [ENTER].
The play list is erased.
To stop partway through
In step 5, either select “Cancel” and press [ENTER] or press
[RETURN].
Titling play lists
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you created play lists on.
While stopped
Press [TOP WINDOW].
Use the joystick [, , , ] to
select “PLAY LIST”...")
![Page 74
74
RQT6035
Advanced operations
Using play lists to edit programs
Checking play list contents
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you created play lists on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to se-
lect “PLAY LIST” and press [ENTER].
3Use the joystick [, ] to select the
play list whose contents you want to
check and then use the joystick [].
4Use the joystick [, ] to select
“Properties” and press [ENTER].
You can confirm the play list title (if...](http://img.usermanuals.tech/thumb/58/66396/w64_dmr-e20_en_om_d-73.png "Page 74
74
RQT6035
Advanced operations
Using play lists to edit programs
Checking play list contents
Preparation
Switch [DVD, TV] to “DVD”.
Insert a disc you created play lists on.
1While stopped
Press [TOP WINDOW].
2Use the joystick [, , , ] to se-
lect “PLAY LIST” and press [ENTER].
3Use the joystick [, ] to select the
play list whose contents you want to
check and then use the joystick [].
4Use the joystick [, ] to select
“Properties” and press [ENTER].
You can confirm the play list title (if...")
71 RQT6035 Advanced operations Using play lists to edit programs 7Use search functions such as fast- forward and slow-motion to find the start point of the scene and press [ENTER]. 8Use search functions such as fast- forward and slow-motion to find the end point of the scene and press [ENTER]. 9Use the joystick [, ] to select “Exit” and press [ENTER]. To re-edit another scene Use the joystick [, ] after step 8 to select “Prev.” or “Next” and press [ENTER] until you find the scene you want to reedit. Repeat steps 7 and 8 to continue re-editing other scenes. Note You cannot specify an end point before a start point or a start point after an end point. Erasing a scene from a play list Preparation Do steps 1 to 4 of “Editing play list scenes” (➡ pages 68 and 69). Use the joystick [, ] to select “Erase” and press [ENTER]. Use the joystick [, , , ] to select the scene you want to erase and press [ENTER]. Use the joystick [, ] to select “Yes” and press [ENTER]. To erase other sceneRepeat steps 6 and 7. To stop partway throughIn step 7, either select “No” and press [ENTER] or press [RETURN]. For your reference The play list itself is erased if you erase all the scenes in it.The selected scene is erased from the play list. 5 7·8 9 6 7 ENTERENTER ENTERENTER ENTERENTER ENTERENTER ENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH S TAT U S RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 7·8·9 5·6·7 RETURN PLAY LISTRe-edit Scenes 0 : 00 . 05StartEnd3 Start 2Prev. End NextExit Scene No.0 : 00 . 10 RETURN ENTER SELECT 0 : 00 . 10 PLAY LIST No.3 Dinosaur PLAY1 PLAY LIST Edit Scenes 0 ~ 9Select Page 3 10/21 0:02 004 Dinosaur AddMoveRe-editErase --- 002003 004--- 001 00:00.19 PLAY LIST Edit Scenes 2 / 3 3 10/21 0:02 004 Dinosaur Prev. Next AddMoveRe-editErase --------- --- 002003 004--- 001 00:00.19 Erase this Scene? Ye sErase Scenes No RETURN ENTERSELECT
72 RQT6035 Advanced operations Using play lists to edit programs Preparation Switch [DVD, TV] to “DVD”. Insert a disc you created play lists on. Copying play lists 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to se- lect “PLAY LIST” and press [ENTER]. 3Use the joystick [, ] to select the play list you want to copy and then use the joystick []. 4Use the joystick [, ] to select “PL Copy” and press [ENTER]. 5Use the joystick [, ] to select “Copy” and press [ENTER]. The copied play list appears at the bottom of the list. To stop partway throughIs step 5, either select “Cancel” and press [ENTER] or press [RETURN]. Erasing a play list 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to select “PLAY LIST” and press [ENTER]. 3Use the joystick [, ] to select the play list you want to erase and use the joystick []. (Continued on next page) 1 2 4 5 3 TOP WINDOW ENTERENTER ENTERENTER ENTERENTER ENTERENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 DVD, TV 2·3·4·5 RETURN1 PLAY LIST PLAY LIST ------No. Date Total Scene EditTitleAuto action USJ1 10/23 006 006 003 2 10/26 007 3 10/21 004006Dinosaur 3 3 1 1 1 1 1 1 002003 004 001 --- -- --/-- --:-- Copy this PLAY LIST? CopyCopy PLAY LIST Cancel RETURN ENTERSELECT PLAY LIST TOP TOP Edit Scenes PL Copy PL Erase Enter Title Properties Play Scenes
73 RQT6035 Advanced operations Using play lists to edit programs 4Use the joystick [, ] to select “PL Erase” and press [ENTER]. 5Use the joystick [, ] to select “Erase” and press [ENTER]. The play list is erased. To stop partway through In step 5, either select “Cancel” and press [ENTER] or press [RETURN]. Titling play lists Preparation Switch [DVD, TV] to “DVD”. Insert a disc you created play lists on. While stopped Press [TOP WINDOW]. Use the joystick [, , , ] to select “PLAY LIST” and press [ENTER]. Use the joystick [, ] to select the play list you want to title and then move the joystick []. Use the joystick [, ] to select “Enter Title” and press [ENTER]. Enter the title. Enter titles as with disc titling (➡ page 51). For your reference You can give play lists on DVD-RAM titles of up to 64 characters. Note Even if you have entered up to the maximum number of characters, characters you enter after the position marked with “” in the title field and the two characters immediately prior to the mark will be replaced with “” when displayed in the play list screen. 1 2 4 5 3 4 TOP WINDOW ENTERENTER ENTERENTER ENTERENTER ENTERENTER ENTERENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 10 0 DVD, TV 4·5 2·3·41 RETURN PLAY LIST TOP Edit Scenes PL Copy PL Erase Enter Title Properties Play Scenes PLAY LIST ------No. Date Total Scene EditTitleAuto action USJ1 10/23 006 006 003 2 10/26 007 3 10/21 004006Dinosaur 3 3 1 1 1 1 1 1 002003 004 001 --- -- --/-- --:-- Erase this PLAY LIST? EraseErase PLAY LIST Cancel RETURN ENTERSELECT Edit Scenes PL Copy PL Erase Enter Title Properties Play Scenes
74 RQT6035 Advanced operations Using play lists to edit programs Checking play list contents Preparation Switch [DVD, TV] to “DVD”. Insert a disc you created play lists on. 1While stopped Press [TOP WINDOW]. 2Use the joystick [, , , ] to se- lect “PLAY LIST” and press [ENTER]. 3Use the joystick [, ] to select the play list whose contents you want to check and then use the joystick []. 4Use the joystick [, ] to select “Properties” and press [ENTER]. You can confirm the play list title (if entered), play list number, date of creation, total number of scenes and total time. 1 2 43 TOP WINDOW ENTERENTER ENTERENTER ENTERENTER TV CH TV/AV PROG / CHECK TOP WINDOWFRAME SKIP STOP VCR Plus + REC TIME SLIP CM SKIP V.S.S. ACTIONTV DV D AUDIOADD/DLT REC MODECANCELINPUT SELECT LAST MARKER MARKER WRITE CHDVD 123 456 789 0 PAUSE PLAY SLOW/SEARCH STATUS RETURNENTER VOLPOWER POWER OPEN/CLOSETCERIDROTAGIVANTOPMENUMENU DISPLAYTSILYALP 100 DVD, TV 2·3·4 1 PLAY LIST TOP Edit Scenes PL Copy PL Erase Enter Title Properties Play Scenes PLAY LIST ------No. Date Total Scene EditTitleAuto action USJ1 10/23 006 006 003 2 10/26 007 3 10/21 004006Dinosaur 3 3 1 1 1 1 1 1 002003 004 001 --- -- --/-- --:-- Properties No. Scenes 0:05.51Date Total 3 0046/22/2001 FRI RETURN ENTER Dinosaur When you press [ENTER]
75 RQT6035 Home Theater Expanding your home theater system Refer to the relevant pages for details. Enjoying CATV broadcasts What you want to do Enjoying 5.1-channel surround sound with Dolby Digital and DTS SettingsReference pages Connect a cable TV box.76 Tune to channels correctly. Change the necessary settings on the equipment you have connected. 16, 18, 91 — Digital connection Connect to an amplifier with built-in decoders.78 78 Analog connection Connect to an analog amplifier or system component.ACTION settings—Audio Set PCM Down Conversion to Off.86 Reference pagesHow to do it Enjoying more powerful sound ACTION settings—Audio Set PCM Down Conversion to On. Set Dolby Digital and DTS to suit the equipment. Change speaker settings on the amplifier. 86 — Enjoying stereo or Dolby Pro Logic Digital connection Connect to a digital amplifier or system component.78ACTION settings—Audio Set PCM Down Conversion to On. Set Dolby Digital to PCM. Set DTS to Off.86 Other usesRecord to digital recording equipment or cassette deck ( ➡ page 78) Record from a video cassette recorder (➡ pages 49 and 79 )For your reference The equipment connections described are examples. Before connection, turn off all equipment and read the appropriate operating instructions. Note You can enjoy Dolby Digital in stereo with this unit alone. (This unit does not have a DTS decoder.)Use connection to enjoy discs recorded with a sampling frequency of 96 kHz. Sound will not be output if you use con- nection and set PCM Down Conversion to “Off” due to copy protection. (Convert the signal to 48 kHz to enjoy this type of audio.) Enjoying CATV broadcasts
76 RQT6035 Home Theater VIDEO PBPRYVIDEO R LAUDIO (L1) (L3) OUT1 OUT2 IN1 IN3 R LAUDIO R LAUDIO R LAUDIO S-VIDEO S-VIDEO VIDEO S-VIDEO VIDEOS-VIDEO RF-IN VHF/UHF RF-OUT COMPONENT VIDEO OUT AUDIO INVIDEO IN VHF/UHF RF IN RF IN RF OUT VHF/UHF Expanding your home theater system Select channel 3 or 4 to see the output from the cable TV box or DSS receiver. Select the appropriate video input if your television has more than one. AConnecting a cable TV box You need to have a cable TV box and a contract with a cable TV company to enjoy CATV broadcasts. Consult your cable TV company for an appropriate cable TV box. Television (not included) Cable TV box (not included)To household cable TV jack 75 coaxial cable (not included) Audio/Video cable (not included) Rear of this unit You cannotview channels other than the one selected when recording. do a timer recording unless the channel is first selected on the cable TV box. Audio/Video cable Yellow (VIDEO) White (L) Red (R) With a cable TV box
77 RQT6035 Home Theater IN OUT VIDEO PBPRYVIDEO R LAUDIO (L1) (L3) OUT1 OUT2 IN1 IN3 R LAUDIO R LAUDIO R LAUDIO S-VIDEO S-VIDEO VIDEO S-VIDEO VIDEOS-VIDEO RF-IN VHF/UHFRF-OUT COMPONENT VIDEO OUT AUDIO INVIDEO IN VHF/UHF RF IN OUT1 OUT2 IN OUTIN OUT IN2 IN1 IN VIDEO PBPRYVIDEO R LAUDIO (L1) (L3) OUT1 OUT2 IN1 IN3 R LAUDIO R LAUDIO R LAUDIO S-VIDEO S-VIDEO VIDEO S-VIDEO VIDEOS-VIDEO RF-IN VHF/UHFRF-OUT COMPONENT VIDEO OUT AUDIO INVIDEO IN VHF/UHF RF IN With two cable boxesTelevision (not included) Audio/Video cable (not included) Rear of this unit Cable TV box (not included)2-way splitter (not included)To household cable TV jack Switch box (not included) Connect with 75 coaxial cables (not included) You canrecord and view both scrambled and unscrambled channels if ad- ditional equipment is added. This connection requires: two cable TV boxes, a switch box, and a 2-way splitter.You cannotview channel other than the one selected when recording. do a timer recording unless the channel is first selected on the cable TV box. Connecting a home satellite system (Dishnetwork/DSS) Television (not included) Audio/Video cable (not included) Rear of this unit Note When a home satellite system (Dishnetwork/DSS) is connected, auto channel program and auto time set may not operate properly. Set the clock manually (➡ page 88). 75 coaxial cable (not included) DSS receiver (not included) You cannotview channel other than the one selected when recording. do a timer recording unless the channel is first selected on the DSS receiver.Satellite TV Dishnetwork/ DSS
78 RQT6035 Home Theater VIDEO VIDEO OPTICAL R LAUDI O (L1) (L3)AC INT OUT1OUT2 IN1 IN3 (PCM/BITSTREAM) DIGITAL AUDIO OUT R LAUDI O R LAUDI O R LAUDIO S-VIDEO S-VIDEO VIDEO S-VIDEO VIDEOS-VIDEO OPTICALAC INT OUT1 OUT2 IN1 IN3 (PCM/BITSTREAM) DIGITAL AUDIO OUT B Connecting to a digital amplifier or system component Rear of this unit Expanding your home theater system Insert fully, with this side facing up. (Do not bend when connecting.) To enjoy Dolby Pro Logic (➡ page 96)You will also need to connect center and surround speakers in addi- tion to the front speakers to enjoy surround sound. Read the instruc- tions for the equipment for connection details. Turn V.S.S. off. Dolby Pro Logic will not function correctly if V.S.S. is on. Optical digital audio cable (not included) To optical digital input Amplifier or system component (with or without decoders) (not included) Speakers (not included) Example: Six speakers For your reference Change the settings in the Audio ACTION menus (➡ page 83) to suit the digital equipment you have connected. If the equipment can decode Dolby Digital, set “Dolby Digital” to “Bitstream” (factory setting). If the equipment can decode DTS, set “DTS” to “Bitstream”. The DTS decoder must be compatible with the signals recorded on DVD. CConnecting an analog amplifier or system component Rear panel of this unit Audio cable (not included) Audio input (L/R) 2-channel analog amplifier or system component (not included) Audio cable Red (R) White (L) You can record the digital signal directly onto digital recording equipment. The signals on DVDs will be converted to 48 kHz/16 bit linear PCM. When recording DVDs, ensure the following conditions are met. There is no copy guard recorded on the disc. The recording equipment can handle a sampling frequency of 48 kHz/16 bit. If you want to use the synchro recording feature on your digit- al recording equipment and you use connection or to record from CDs or video CDs, first pause at the point you want to record from, activate the synchro feature, then restart play on the unit. !?!?
79 RQT6035 Home Theater VIDEO PBPRYVIDEO OPTICAL R LAUDIO (L1) (L3) OUT1 OUT2 IN1 IN3 (PCM/BITSTREAM) DIGITAL AUDIO OUT R LAUDIO R LAUDIO R LAUDIO S-VIDEO S-VIDEO VIDEO S-VIDEO VIDEOS-VIDEO COMPONENT VIDEO OUT POWER S-VIDEO IN AUDIO INVIDEO IN–R L/MONO– REC MODE CH/IREC When connecting to the L2 input terminals on the front of the unit Note If the audio output of the other equipment is monaural, connect to L/MONO. (Both left and right channels are recorded when connect- ed through L/MONO.) S video cable (not included)Audio/Video cable (not included) Other playback equipment Connect to the video and audio output terminals. When connecting to the input terminals on the rear of the unit Other playback equipment Connect to the video and audio output terminals. Audio/Video cable (not included)S video cable (not included) Rear panel of this unit Audio/Video cable Yellow (VIDEO) White (L) Red (R)Audio/Video cable Yellow (VIDEO) White (L) Red (R) DConnecting a video cassette recorder Note If audio output on the other equipment is monaural, use a stereo- monaural conversion cable (not included).
80 RQT6035 Home Theater When you can’t directly connect the antenna you disconnected from your television to the unit Check the type of antenna input on your television and make the appropriate connection. Expanding your home theater system When you can’t directly connect the included 75 coaxial cable to the television Use the connection that suits the type of terminal. from the antenna If there is a twin lead and a coaxial cable If there are two twin leads from the antenna from the antenna(Flat) Twin lead 300 cable (Round) 75 coaxial cable300 – 75 transformer (not included) VHF/UHF band mixer (not included) VHF/UHF band mixer (not included) 300 – 75 transformer (not included)To this unit’s RF IN terminal To this unit’s RF IN terminal To this unit’s RF IN terminalVHF/UHF band separator (not included)Television If it is a screw type terminal 75 – 300 transformer (not included)Television 75 coaxial cable If it is a double screw type terminal Television VHF/UHF band separator (not included) If it is a complex TV terminal If your television has both post and plug-type VHF terminals, the post connection is recommended to minimize signal loss.Connect to one of the ANT terminals and select the same antenna number on the television. If it is a twin lead (Flat) Twin lead 300 cable (Flat) Twin lead 300 cable If it is a screw & plug type terminal VHF UHF VHF or UHF Television Split out ANT 1 ANT 2VHF UHF