Panasonic Document Scanner Kv S1026c Operating Manual

							3.
Set the exit tray.
a.Pull out the exit tray. b.
Open the feed extension tray. c.
Open the exit stopper. Operating Manual 21 Installation    
						

							4.
Connect the AC adaptor ( A) and the power cord (B).
• Connect the power cord to the AC adaptor.
• Connect the AC adaptor to the scanner.
• Plug into the AC outlet. AC adaptor
Power cord
To AC outlet
Notice
•Use only with the power cord and the AC adaptor enclosed with the unit.
• When 
the unit is not used over an extended period of time, turn the unit off, and unplug the power cord.
The scanner consumes approximately 0.3 W of electricity even when the main unit is turned off. 22 Operating ManualInstallation12
3     
						

							Installing Software
Software Installation and Connection
The software on the enclosed Software / Manual DVD
-ROM can be installed on your computer.
You can select from the 3 installation methods below, depending on your needs.
a. Complete: Install all the drivers, applications, utilities and Operation Manual.
b. All Drivers & Utilities: Install the drivers, utilities and Operation Manual.
c. Custom: Install one of the drivers or Operation Manual. Note
•Normally, it is recommended to select [Complete]. Notice
•Make sure to log on as an administrator to install the software.
1. Check that the scanner has been turned off.
•Press the power button for more than one second to turn the scanner off.
2. Insert the Software / Manual DVD-ROM into the CD/DVD drive on your computer.
•If you have a feature called "Autorun

" activated, the installation process will start automatically.
• The setup window will appear. Note
•If the AutoPlay dialog box is displayed in Windows

 Vista or Windows 7, select "CDRun.exe".
• If the program does not start automatically, from [Computer] ( [Computer] in Windows  Vista , [My
Computer] in Windows XP), select the CD/DVD drive, and then double-click "CDRun.exe".
3. Select your scanner model.
4. Check the [Read me first] file. Operating Manual 23 Installation  
						

							5.
Select the desired installation methods from the  "Software" list on the left side of the screen.
• If you selected [Complete] or [All Drivers & Utilities], continue to step  7.
If you selected [Custom], continue to step 6.
6. If you selected [Custom] for the installation type in step 5, select the item that you want to install. 7.
Follow the instructions on the screen.
8. Connect the scanner and computer using the USB cable ( A).USB cable
To computer
Notice
•Be sure to use the USB cable supplied with this unit. 24 Operating ManualInstallation 1
2    
						

							9.
Press the power button ( A) to turn ON the scanner power.•
The LED   (green) will flash and then turn on.
• If the device driver is installed, follow the hardware wizard
’s on-screen instructions to complete
installation. If you are using Windows Vista or Windows 7, this will be performed automatically. Note
•Continue with the installation even if a window appears with the message 

"Digital Signature Not
Found" or "has not passed Windows Logo testing...". Operating Manual 25 Installation1   
						

							Viewing Operation Manual and Help Installed
If the manuals and software that were included on the Software / Manual DVD -ROM have been installed on
your computer, you can use the following procedure to view the Operation Manual and the software ’s help.
To view the Operation Manual 1.On the [Start] menu, point to [All Programs], then [Panasonic], and select [Scanner Manuals].
2. Select the desired manual.
•The selected manual will open.
To view the help For Image Capture Plus
1.On the [Start] menu, point to [All Programs], [Panasonic], [Image Capture Plus], and then select
[Image Capture Plus Help].
For User Utility
1. On the [Start] menu, point to [All Programs], [Panasonic], [Scanner Tools], and then select [User Utility
Help].
For Presto! PageManager 9
1. On the [Start] menu, point to [All Programs], [NewSoft], [Presto! PageManager 9.XX Standard] *1
, and then
select [Presto! PageManager User’s Manual].
For Presto! BizCard 6
1. On the [Start] menu, point to [All Programs], [NewSoft], [Presto!  BizCard 6]*1
, and then select
[Presto! BizCard User’s Manual].
*1 "X.XX" and the number that follows a program name are the software version. When you upgrade the software, the numbers above
may be different from the actual software version. Note
•We recommend that you view the help using Internet Explorer ®
 6.0 or later for Windows. 26 Operating ManualInstallation 
						

							Starting Up Scanner Applications Automatically
Single Touch Scan Settings
You can configure settings so that the application starts up automatically 
"when a document is placed on the
scanner’s feed tray" ("place to scan") and "when a single touch scan button (1-3) is pressed".
Setting the application to start up Set whether an application will automatically start up and select under which conditions it will start up in the
Scan Button Setting Tool.
1.Double click the ( ) icon in the notification area of the task bar to open the Scan Button Setting Tool.
2. Select Scan button or Place to Scan for the condition to automatically start up the application.
3. Select the application to start up. Note
•The application can be selected from Presto! PageManager 9 and Image Capture Plus.
• The set application is enabled for both 

"place to scan" and "when a single touch scan button (1-3) is
pressed".
• For details about the Scan Button Setting Tool, refer to the Scan Button Setting Tool help.
Setting the scanning conditions Scanning conditions are set on the setting screen of each application.
1.Open the setting screen.
•When "single touch scan button (1-3)" is selected:  Press a button for more than 2 seconds to open
the setting screen of each application. (If the scanner is in Sleep mode, press the Start/Stop button to
return to Ready mode first.)
• When "place to scan" is selected: Open the setting screen of each application manually.
2. Set the scanning conditions.
•For details about the setting screen of each application, refer to the manual or help for that application.
Checking events Check the following if an application does not start up after being set.
1.Click [Start], and then click [Control Panel].
2. Select this scanner in [Devices and Printers], right-click the icon, and display the [Scan Properties] screen.
•When using Windows Vista, click the scanner icon, and then click the Properties button.
• When using Windows XP, select this scanner in [Scanners and Cameras] right -click the icon, and
display the Properties screen.
3. Click the [Events] tab.
4. Check that "Scan Button Setting Tool" is selected for "Send to this application " when each condition is
selected in "Scanner events".
• If an application other than "Scan Button Setting Tool" is selected, change the application to "Scan
Button Setting Tool". Operating Manual 27 Installation  
						

							5.
Check that the "Disable device events " checkbox is unchecked.
• If the checkbox is checked, uncheck it. 6.
Click [OK].
7. Restart the computer. 28 Operating ManualInstallation  
						

							Deleting Installed Software
If you want to remove the software that is installed on your computer, follow the procedure below to uninstall
them.
1.In [Control Panel], open [Uninstall a program].
•In Windows  XP, select [Add or Remove Programs].
2. Select the item that you want to uninstall.
•The software is displayed with the program names below:
Software Program Name
Device driver Panasonic Document Device Driver X.XX *1
TWAIN KV-S1026C KV-S1015C TWAIN Driver
ISIS KV-S1026C ISIS Driver
Image Capture Plus Image Capture Plus
Presto! PageManager 9 Presto! PageManager 9.XX*1
Presto! BizCard 6 Presto! BizCard 6*1
User Utility Panasonic Scanner User Utility
Manuals Panasonic Scanner Manuals*1
"X.XX" and the number that follows a program name are the software version. When you upgrade the software, the numbers
above may be different from the actual software version.
3. Follow the instructions on the screen. Operating Manual 29 Installation 
						

							Preparing Documents
Acceptable Documents
The acceptable documents for this scanner are as follows.Document size: Paper thickness for Feeding:
KV-S1026C: 20
–209 g/m²
KV-S1015C: 40–209 g/m² •The height of all the documents on the tray should be less than 5 mm.
This compares to 50 sheets (80  g/m² or 20 lb.) of new paper.
• With the exception of ISO format cards, the minimum guaranteed feeding length is 70 mm (2.8 in.).
• Single paper feeding is recommended for papers exceeding the legal size length.
Recommended paper: Plain paper
Acceptable cards ISO format card:Size: 85.6 x 54 mm (3.4 x 2.1 in.)
Thickness: 0.76 mm (0.03 in.)
Embossed card is also acceptable.
• A maximum of 3 cards can be loaded on the feed tray.
The 

height of the total cards (the total thickness including the embossing on each card) should be less than
5 mm (0.2 in.). Additionally, the embossing on each card must not get entangled with others.
• Use the landscape orientation when scanning an embossed card.
If the scanning fails, place the card upside down, and then try again.
• Use the mixed batch card guide (page 37) when scanning mixed media (cards and papers) at the
same time. 30 Operating ManualO
p
e
r
a
t
i
o
n
Operation48–216 mm
(1.9–8.5 in.)70–2,540 mm 
(2.8–100 in.)