Panasonic DP 180 User Manual

							Configuring the Printer Driver Settings
71
Windows NT 4.0 (Administrator)
Printer Section
Sc he duling Ta b
1.Av a il a b l e
Schedules when the printer is available for operation. Specify operating hours when From-To is selected.
2.Prio rity
Sets printin g prio rity. The slider allows the priority to be adjuste d from 1 through 99.
3.Spool print documents... / Print directly to the printer
Specify how documents should be sent from an application to the printer.
4.Hold mismatched doc ume nts
The spooler compa res document settings again st printer settings an d holds printing of a document if its 
settings (Paper Size, Orientation, and so on) do not match the printer settings.
5.Print spooled documents first
Always prints spooled documents first regardless of printing priority.
6.Keep documents after they have printed
Holds d ocume nts in the print queu e even  after they have been printe d. These documents can be prin ted 
again directly from the queue regardless of the state the application is in.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring the Printer Driver Settings
72
Windows NT 4.0 (Administrator)
Sharing Tab
1.Not Shared/Shared
Select whether to display or  share this printer with other computers.
2.Share Name
Specify the name of the shared printer. The displayed name can be used as is or a new name may be 
entered. The name specified here will be displayed when other users view information about the printer 
on the network.
3.Alternate Driv ers  (The PS Printer Driver is not av ailable in this me nu.)
Allows other operating systems  printer drivers to be loaded.  When users of these operating systems 
connect to the printer, the printer driver is automatically loaded.
NOTE1. When sharing a printer on the network, the print driver needs to be installed on the print server 
only; other computers will automatically copy and use that driver.
For this reason, the print server must be ready with printer drivers for all the operating systems 
of all the computers that will be sharing the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring the Printer Driver Settings
73
Windows NT 4.0 (Administrator)
Printer Section
Security Tab
1. button
Set printer access privileges.
2. button
Displays the users who have used this printer and how they used it.
3. button
Set the ownership of the printer.
NOTE1. In order to utilize these features, first you need to select Audit... from User Managers 
Policies and enable File and Object Access in the Audit Policy dialog  box.
Permissions
Auditing
Ownership
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring the Printer Driver Settings
74
Windows NT 4.0 (Administrator)
Device Settings Tab (DP-180/190/1520P/1820P/1820E)
Specifies the following printer settings and options:
•Form To Tray Ass ignment
Specifies the paper size of each available tray.
•Font Substitutuion Table
Specifies which PostScript fonts to substitute for TrueType fonts. Instead of sending all TrueType fonts to 
your printer, this option substitutes a PostScript printer font for the common TrueType fonts used in your 
document.
•Available PostSc ript Memory
Sp ecifies the  amount of available printer memory. The  driver uses this in formation when performing 
printing tasks, such as sending fonts from the computer to the printer.
•Output Protoc ol
Specifies the data format to the printer. Only use this option if you are an advanced user with experience 
working with PostScript.
•Se nd CTRL-D Before/After Each Job
Sends a CTRL+D to notify the printer that the current job has finished printing and to reset the printer. Only 
use this option if you are an advanced user with experience working with PostScript.
•Convert Gray Text/Graphics to PostScript Gray
This feature is not available on the se machines.
•Add Euro Currency Symbol to PostScript Fonts
Adds the European currency symbol to most PostScript fonts.
•Job timeout
Specifies the maximum number of seconds that the print job can take to get from the computer to the 
printer before the job is canceled.
A value of zero means that the job is never canceled. If your printer is shared, do not specify a value of 
zero.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring the Printer Driver Settings
75
Windows NT 4.0 (Administrator)
Printer Section
•Wait time out
Specifies the maximum number of seconds that the printer will wait for the computer to send data before 
canceling the job.
A value of zero means that the job is never canceled. If your printer is shared, do not specify a value of 
zero.
•Minimum Font Size  to Download as Outline
Specifies the minimum font size to download as Outline. Increasing this value can speed up printing.
•Maximum Font Size to Download as Bitmap
Specifies the maximum font size to download as Bitmap. Decreasing this value can speed up printing.
Installable Options
•Number of Paper Trays
Select the number of a vailable paper tra ys if optional Paper Fee d Module(s) are  installed.
•Hard Disk Drive
Select if the HDD Unit is installed.
•Memory
Select the memory (Standard or additional).
(Only available if the optional HDD unit (DA-HD18/HD19/HD30/HD60) is installed)
Note:1. DA-HD18: For DP1 520P/1820P/1820 E; DA-HD19 : For DP-180/190; 
DA-HD30: For DP-2330 /3030 ; DA-HD60: For DP-35 30/45 30/60 30.
2. Make sure that the Device Settings Tab is set properly before printing a document.  
Otherwise, printing problems may occur.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring the Printer Driver Settings
76
Windows NT 4.0 (Administrator)
Device Settings Tab (DP-2330/3030/3530/4530/6030)
Specifies the following printer settings and options:
•Form To Tray Ass ignment
Specifies the paper size of each available tray.
•Font Substitutuion Table
Specifies which PostScript fonts to substitute for TrueType fonts. Instead of sending all TrueType fonts to 
your printer, this option substitutes a PostScript printer font for the common TrueType fonts used in your 
document.
•Available PostSc ript Memory
Sp ecifies the  amount of available printer memory. The  driver uses this in formation when performing 
printing tasks, such as sending fonts from the computer to the printer.
•Output Protoc ol
Specifies the data format to the printer. Only use this option if you are an advanced user with experience 
working with PostScript.
•Se nd CTRL-D Before/After Each Job
Sends a CTRL+D to notify the printer that the current job has finished printing and to reset the printer. Only 
use this option if you are an advanced user with experience working with PostScript.
•Convert Gray Text/Graphics to PostScript Gray
This feature is not available on your machine.
•Add Euro Currency Symbol to PostScript Fonts
Adds the European currency symbol to most PostScript fonts.
•Job timeout
Specifies the maximum number of seconds that the print job can take to get from the computer to the 
printer before the job is canceled.
A value of zero means that the job is never canceled. If your printer is shared, do not specify a value of 
zero.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring the Printer Driver Settings
77
Windows NT 4.0 (Administrator)
Printer Section
•Wait time out
Specifies the maximum number of seconds that the printer will wait for the computer to send data before 
canceling the job.
A value of zero means that the job is never canceled. If your printer is shared, do not specify a value of 
zero.
•Minimum Font Size  to Download as Outline
Specifies the minimum font size to download as Outline. Increasing this value can speed up printing.
•Maximum Font Size to Download as Bitmap
Specifies the maximum font size to download as Bitmap. Decreasing this value can speed up printing.
Installable Options
•Number of Paper Trays
Select the number of a vailable paper tra ys if optional Paper Fee d Module(s) are  installed.
•Large Capacity Pape r Tray (LCT) (For DP-3530 /4530 /6030  only)
Select if a Large Capacity Paper Tray is installed.
•Finisher (For DP-3530/4530/6030 only)
Select the type of Finisher if a Finisher is installed.
•Punch Unit (For DP-35 30/45 30/6 030 only)
Select if a Punch Unit is installed.
•Outer Option (For DP-2330 /3030  only)
Select the type of Finisher if a Finisher is installed.
•Inne r Tray (For DP-2 330/3 030 only )
Select Installed if the Inner Tray is installed.
•Duplex Unit (For DP-2330/3030 only)
Select Installed if the Duplex Unit is installed.
•Hard Disk Drive
Select if the HDD Unit is installed.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring the Printer Driver Settings
78
General Tab
1.Printer Name
Name of the printer specified upon installation is displayed.
2.Location
Specifies the printer location.
3.Comment
Enter comments to the properties, if any.
If another user sets up this printer on his or her computer when sharing the printer, the comment specified 
here will also appear on that computer. However, the comment displayed for an existing user will remain 
unchanged even if the comment is modified later.
4.Features
Functions and setting s of the printer are displaye d.
5. button
Changes properties (print settings) specifiable for each user.
Refer to Printing from Windows Applications for detailed settings.  (See page 113)
6.  button
Prints a test page . This allows the use r to verify if th e prin ter is installed properly.
NOTE1. In Windows 2000/Windows XP/Windows Server 2003, setting the properties depends on the 
logon account. This section describes properties to be specified by the administrator (system 
manager). 
See Printing from Windows Applications for details on user properties.  (See page 113)
Windows 2000/Windows XP/Windows Server 2003 (Administrator)
Printing Preferences...
Print Test Page
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring the Printer Driver Settings
79
Windows 2000/Windows XP/Windows Server 2003 (Administrator)
Printer Section
Sharing Tab
1.Not shared/Shared as (Do not share this printer/Share this printer)
Select whether to display or share this printer with other computers.
For sha ring a  printer, specify the share n ame of a printer to be  shared. A name specifie d here appears 
when other users view the printer information on a network.
2. button (The PS Printer Driver is not available in this menu.)
Allows other operating systems printer drivers to be loaded.  When users of these operating systems 
connect to the printer, the printer driver is automatically loaded.
NOTE1. When sharing a printer on the network, the print driver needs to be installed on the print server 
only; other computers will automatically copy and use that driver.
For this reason, the print server must be ready with printer drivers for all the operating systems 
of all the computers that will be sharing the printer.
2. If Windows is set to disable remote access to your PC for security, Windows will ask you to 
activate the Network Setup Wizard. Follow the messages to enable the Sharing Tab.
 
Additional Drivers...
Downloaded From ManualsPrinter.com Manuals 
						

							Configuring the Printer Driver Settings
80
Windows 2000/Windows XP/Windows Server 2003 (Administrator)
Ports Tab
1.Print to the following port(s)
Displays a list of available ports for printing (Port), their status (Description) and printers that are
connected to these ports (Printer).
2. /   button
Adds/deletes a new port or a new network path.
3. button
Configures the selected port.   In case  of a  parallel port, Tra nsmission Re try sho uld be specified.
4.Enable bidirectional support (The fea ture is  not available with these  models.)
Be sure to check the check box for Enable bidirectional support  when installing the status monitor.  
Otherwise, status information reception may not function property.
5.Enable printer pooling
Printer  pooling allows outputting data from one logical printer to two or more printers. With printer pooling 
enabled, a transmitted printing job is output to the first printer that is ready for printing.
Add Port...Delete Port
Configure Port...
Downloaded From ManualsPrinter.com Manuals