Panasonic DP 2330 User Manual

11
Getting To KnowYour Machine
For Your Safety
■ The maximum power consumption is 1.45 kW.
A properly wired (grounded), dedicated, 15A, 120V AC outlet is required. Do not use an extension cord.
The power cord on this machine must be used to disconnect the main power\
.
Please ensure that the machine is installed near a wall outlet and is ea\
sily accessible.
Caution Note:  Unplug the power cord from the wall outlet before removing covers.
Supplies
■Store the Toner Cartridge and paper in cool areas with...

12
Getting To Know Your Machine
Ventilation
■ The machine should be installed in a well-ventilated area to minimize th\
e ozone density in the air.
WARNING For USA
This product has a fluorescent lamp that contains a small amount of merc\
ury. It also contains lead in
some components. Disposal of these materials may be regulated in your co\
mmunity due to
environmental considerations.
For disposal or recycling information please contact your local authorit\
ies, or the Electronics
Industries Alliance:...

13
Getting To KnowYour Machine
■ Dept. (Departmental) Code
When the Department Counter function is set up, the Dept. (Department)\
 Code input screen is displayed on the
LCD Display. A registered Department Code (1 to 8-digit) is required to gain access \
to each secured function, or
the secured Copy/Fax/Scanner function(s) cannot be used. Please consul\
t with the Key Operator regarding the
Department Code(s) for the desired function.
Procedures :
Input a registered department code (1 to 8-digit)....

14
Getting To Know Your Machine
Operation Chart
If set in other
function mode
*30 originals (Legal/Ledger)
F ace Up
Original Guides
Adjust to the original’s width
From
ADF
From
Platen
Load Paper
T
urn the Power
Switch on the Left
side of the machine
to the ON position.
Face Down
● If the original is not positioned
properly, a portion of the original
may not be copied.
● For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
or
Tray
Max. 50 originals*
●...

15
Getting To KnowYour Machine
Reduction/ Enlargement only
(See page 28)
Select desired settings
Number of Copies
(Max. 999)
Adjust the Manual Exposure
                     or
Select type of Original(s) Mainly Text T
ext and Photo
combined Mainly Photo
Receiving Tray (Lower) Receiving Tray (Upper)
T ray/1-Bin Finisher (External)
• INNER 2 and OUTER are only available when the optional Inner Tray or Exit Tray/1-Bin Finisher is installed.
Copy Jobs
(See pages 26-33) (See pages 34-39) (See pages 40 and...

16
Getting To Know Your Machine
Operation Chart
■ Problem Solving
●  Replacing the Staple Cartridge (When optional 1-Bin Finisher is instal\
led.)
● Replacing Toner Bottle/Replacing Toner Waste Container
● User Error Codes (U Code)
Replace Toner Bottle
Replace Toner Waste
Container
Toner Waste Container
Shake the new Toner 
Bottle well to loosen the contents. Seal
T
oner Bottle
(New)
Check the
operation
U1
U4 U6
U7
U13
U14
U15
U16
U25 
U12
U11
U20/U21/U22
U0
U90
U8
Code Check Points
U0 Contact your Key...

17
Getting To KnowYour Machine
Bottles Green Knob
New Toner Bottle 
Toner Bottle
Bottles Green Knob
Toner Bottle(Empty)
New Toner Waste Container
(New)
Staple Case
New
1
2
Empty
1
2
3
Jammed
Staple
Staple Cartridge
FQ-SS32
When the Staple is jammed
●The following message will
be displayed on the Touch
Panel Display:
Can Not Complete
Confirm Staple Unit
Code Check Points
U11 Paper remains in the Finisher Bin.
U12 Finisher Staple Cover/Top Cover is open.
U13 Low Toner.
U14 Toner Waste Container is full....

18
Getting To Know Your Machine
Operation Chart
■ Problem Solving (Continued)
●  Removing a Misfed Paper (Paper Entry Area/1st Paper Tray)
●  Removing a Misfed Paper (Paper Transport Area)
● Removing a Misfed Paper (Automatic Duplex Unit)
● Removing a Misfed Paper (2nd/3rd/4th Paper Tray)
Options
3rd Paper Tray (DA-DS305)
4th Paper Tray (DA-DS306)
When the optional Tray/1-Bin
Finisher is installed.
Right Cover
Misfed Paper
Right Cover
12Push
Latch
Misfed Paper
Right Cover
Paper Feed Guide
1
2
Feed...

19
Getting To KnowYour Machine
Misfed Paper
1
2
∗ Confirm that the latch is securely fastened.
Heat Roller Cover
Right Paper Clearing Knob
1
3
2
1
2
Paper Tray
Misfed Paper
Latch ∗
T
ransport Cover
Feed Cover
345
34
3
34
6
Right Cover
4
Downloaded From ManualsPrinter.com Manuals 

20
Getting To Know Your Machine
Operation Chart
■ Problem Solving (Continued)
●  Removing a Misfed Paper (ADF)
● Removing a Misfed Paper (1-Bin Finisher)
ADF CoverMisfed Paper
Exit UnitADF Tray
Finisher
Release ButtonMisfed Paper
12
67
12
Option (DA-FS300)
Downloaded From ManualsPrinter.com Manuals