Home
>
Panasonic
>
GPS Receiver
>
Panasonic Dual DIN Hdd Mobile Navigation System Cn Nvd905u Operating Instructions
Panasonic Dual DIN Hdd Mobile Navigation System Cn Nvd905u Operating Instructions
Have a look at the manual Panasonic Dual DIN Hdd Mobile Navigation System Cn Nvd905u Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
Delete an Area to avoid
Once an area is deleted, it cannot be restored.
Check thoroughly before deleting.
1Select [Address Book] from the
Setup menu.
The Address Book screen is displayed.
2Select [Delete] for “Area to avoid”.
The list of areas to avoid is displayed.
3Select the Area to avoid to delete.
Select [Delete all] to delete all areas.
4Select [Yes].
If the destination is set, route searching is
performed.
Register an Area to avoid
Points and areas to detour around on the...](http://img.usermanuals.tech/thumb/58/65918/w64_cn-nvd905u_en_om_d-65.png "Page 66
Delete an Area to avoid
Once an area is deleted, it cannot be restored.
Check thoroughly before deleting.
1Select [Address Book] from the
Setup menu.
The Address Book screen is displayed.
2Select [Delete] for “Area to avoid”.
The list of areas to avoid is displayed.
3Select the Area to avoid to delete.
Select [Delete all] to delete all areas.
4Select [Yes].
If the destination is set, route searching is
performed.
Register an Area to avoid
Points and areas to detour around on the...")
![Page 67
Delete an Area to avoid
Once an area is deleted, it cannot be restored.
Check thoroughly before deleting.
1Select [Address Book] from the
Setup menu.
The Address Book screen is displayed.
2Select [Delete] for “Area to avoid”.
The list of areas to avoid is displayed.
3Select the Area to avoid to delete.
Select [Delete all] to delete all areas.
4Select [Yes].
If the destination is set, route searching is
performed.
Register an Area to avoid
Points and areas to detour around on the...](http://img.usermanuals.tech/thumb/58/65918/w64_cn-nvd905u_en_om_d-66.png "Page 67
Delete an Area to avoid
Once an area is deleted, it cannot be restored.
Check thoroughly before deleting.
1Select [Address Book] from the
Setup menu.
The Address Book screen is displayed.
2Select [Delete] for “Area to avoid”.
The list of areas to avoid is displayed.
3Select the Area to avoid to delete.
Select [Delete all] to delete all areas.
4Select [Yes].
If the destination is set, route searching is
performed.
Register an Area to avoid
Points and areas to detour around on the...")
![Page 68
Register a location (Area to avoid) (continued)
Edit Area to avoid information
Preparation Select the Area to avoid and display the Edit area to
avoid screen. (
page 67)
Set the name of the Area to avoid
1Select [Name] on the Edit area to
avoid screen.
2Enter the name and select [OK].
The entered text is set as the name. The name may have up to 70 characters. How to enter text ( page 97)
Change the position of the Area
to avoid
1Select [Location] on the Edit area to
avoid...](http://img.usermanuals.tech/thumb/58/65918/w64_cn-nvd905u_en_om_d-67.png "Page 68
Register a location (Area to avoid) (continued)
Edit Area to avoid information
Preparation Select the Area to avoid and display the Edit area to
avoid screen. (
page 67)
Set the name of the Area to avoid
1Select [Name] on the Edit area to
avoid screen.
2Enter the name and select [OK].
The entered text is set as the name. The name may have up to 70 characters. How to enter text ( page 97)
Change the position of the Area
to avoid
1Select [Location] on the Edit area to
avoid...")
![Page 69
Register a location (Area to avoid) (continued)
Edit Area to avoid information
Preparation Select the Area to avoid and display the Edit area to
avoid screen. (
page 67)
Set the name of the Area to avoid
1Select [Name] on the Edit area to
avoid screen.
2Enter the name and select [OK].
The entered text is set as the name. The name may have up to 70 characters. How to enter text ( page 97)
Change the position of the Area
to avoid
1Select [Location] on the Edit area to
avoid...](http://img.usermanuals.tech/thumb/58/65918/w64_cn-nvd905u_en_om_d-68.png "Page 69
Register a location (Area to avoid) (continued)
Edit Area to avoid information
Preparation Select the Area to avoid and display the Edit area to
avoid screen. (
page 67)
Set the name of the Area to avoid
1Select [Name] on the Edit area to
avoid screen.
2Enter the name and select [OK].
The entered text is set as the name. The name may have up to 70 characters. How to enter text ( page 97)
Change the position of the Area
to avoid
1Select [Location] on the Edit area to
avoid...")
![Page 70
Switch audiovisual source
1Press .
The Audiovisual source operation screen is
displayed.
2Select an audiovisual source.
The system switches to the selected source.
[AM]: Switches to AM radio.
[FM]: Switches to FM radio.
[DISC]*1: Switches to a corresponding disc.
(DVD, CD, MP3/WMA)
[XM]*2: Switches to XM Satellite Radio.
[SIRIUS]*3: Switches to SIRIUS Satellite
Radio.
[iPod]*4: Switches to iPod.
[AV]: Switches to Line-in.
*1 This system is...](http://img.usermanuals.tech/thumb/58/65918/w64_cn-nvd905u_en_om_d-69.png "Page 70
Switch audiovisual source
1Press .
The Audiovisual source operation screen is
displayed.
2Select an audiovisual source.
The system switches to the selected source.
[AM]: Switches to AM radio.
[FM]: Switches to FM radio.
[DISC]*1: Switches to a corresponding disc.
(DVD, CD, MP3/WMA)
[XM]*2: Switches to XM Satellite Radio.
[SIRIUS]*3: Switches to SIRIUS Satellite
Radio.
[iPod]*4: Switches to iPod.
[AV]: Switches to Line-in.
*1 This system is...")
![Page 71
Switch audiovisual source
1Press .
The Audiovisual source operation screen is
displayed.
2Select an audiovisual source.
The system switches to the selected source.
[AM]: Switches to AM radio.
[FM]: Switches to FM radio.
[DISC]*1: Switches to a corresponding disc.
(DVD, CD, MP3/WMA)
[XM]*2: Switches to XM Satellite Radio.
[SIRIUS]*3: Switches to SIRIUS Satellite
Radio.
[iPod]*4: Switches to iPod.
[AV]: Switches to Line-in.
*1 This system is...](http://img.usermanuals.tech/thumb/58/65918/w64_cn-nvd905u_en_om_d-70.png "Page 71
Switch audiovisual source
1Press .
The Audiovisual source operation screen is
displayed.
2Select an audiovisual source.
The system switches to the selected source.
[AM]: Switches to AM radio.
[FM]: Switches to FM radio.
[DISC]*1: Switches to a corresponding disc.
(DVD, CD, MP3/WMA)
[XM]*2: Switches to XM Satellite Radio.
[SIRIUS]*3: Switches to SIRIUS Satellite
Radio.
[iPod]*4: Switches to iPod.
[AV]: Switches to Line-in.
*1 This system is...")
![Page 74
Switch to disc
(DVD, CD, MP3/WMA)
Select [DISC] (DVD, CD, MP3/WMA)
on the Audiovisual source operation
screen.
The system switches to disc (DVD, CD, MP3/
WMA).
The Disc operation screen (DVD, CD, MP3/
WMA) is displayed.
Note:
Audio and video may be interrupted briefl y while the
format is identifi ed.
Restrictions on the disc itself may prevent operation
from proceeding as described in this manual.
(“
” is displayed on the monitor.) Refer to the disc
instructions manual for details....](http://img.usermanuals.tech/thumb/58/65918/w64_cn-nvd905u_en_om_d-73.png "Page 74
Switch to disc
(DVD, CD, MP3/WMA)
Select [DISC] (DVD, CD, MP3/WMA)
on the Audiovisual source operation
screen.
The system switches to disc (DVD, CD, MP3/
WMA).
The Disc operation screen (DVD, CD, MP3/
WMA) is displayed.
Note:
Audio and video may be interrupted briefl y while the
format is identifi ed.
Restrictions on the disc itself may prevent operation
from proceeding as described in this manual.
(“
” is displayed on the monitor.) Refer to the disc
instructions manual for details....")
![Page 75
Switch to disc
(DVD, CD, MP3/WMA)
Select [DISC] (DVD, CD, MP3/WMA)
on the Audiovisual source operation
screen.
The system switches to disc (DVD, CD, MP3/
WMA).
The Disc operation screen (DVD, CD, MP3/
WMA) is displayed.
Note:
Audio and video may be interrupted briefl y while the
format is identifi ed.
Restrictions on the disc itself may prevent operation
from proceeding as described in this manual.
(“
” is displayed on the monitor.) Refer to the disc
instructions manual for details....](http://img.usermanuals.tech/thumb/58/65918/w64_cn-nvd905u_en_om_d-74.png "Page 75
Switch to disc
(DVD, CD, MP3/WMA)
Select [DISC] (DVD, CD, MP3/WMA)
on the Audiovisual source operation
screen.
The system switches to disc (DVD, CD, MP3/
WMA).
The Disc operation screen (DVD, CD, MP3/
WMA) is displayed.
Note:
Audio and video may be interrupted briefl y while the
format is identifi ed.
Restrictions on the disc itself may prevent operation
from proceeding as described in this manual.
(“
” is displayed on the monitor.) Refer to the disc
instructions manual for details....")
![Page 76
Play a disc (continued)
Stop
Select [] from Short menu 1.
Resume playback
Select [] from Short menu 1.
Playback starts from where it stopped.
Fast forward/Fast reverse
Press and hold .
Fast forward or fast reverse continues while the
button is pressed.
Press and hold
to fast forward.
Press and hold
to fast reverse. Release to return to normal playback. Depressing [] or [] from Short menu 1
will also cause fast forward/reverse.
Select chapter/title
Chapter selection...](http://img.usermanuals.tech/thumb/58/65918/w64_cn-nvd905u_en_om_d-75.png "Page 76
Play a disc (continued)
Stop
Select [] from Short menu 1.
Resume playback
Select [] from Short menu 1.
Playback starts from where it stopped.
Fast forward/Fast reverse
Press and hold .
Fast forward or fast reverse continues while the
button is pressed.
Press and hold
to fast forward.
Press and hold
to fast reverse. Release to return to normal playback. Depressing [] or [] from Short menu 1
will also cause fast forward/reverse.
Select chapter/title
Chapter selection...")
Switch audiovisual source 1Press . The Audiovisual source operation screen is displayed. 2Select an audiovisual source. The system switches to the selected source. [AM]: Switches to AM radio. [FM]: Switches to FM radio. [DISC]*1: Switches to a corresponding disc. (DVD, CD, MP3/WMA) [XM]*2: Switches to XM Satellite Radio. [SIRIUS]*3: Switches to SIRIUS Satellite Radio. [iPod]*4: Switches to iPod. [AV]: Switches to Line-in. *1 This system is able to identify disc types automatically, switching to DVD, CD or MP3/ WMA. * 2 This is displayed when an XM Satellite Radio Tuner (XMD1000) is connected. * 3 This is displayed when a SIRIUS Satellite Radio Tuner (SIR-PAN1) is connected. * 4 This is displayed when an iPod is connected. Note: When [] ([]) is displayed, there is a source that is not displayed on the screen. Select [] ([]) to switch the screen. [Traffi c]: The Traffi c Channels of XM Satellite Radio and SIRIUS Satellite Radio can be memorized for easy access to traffi c information. ( System Upgrade Guidebook) Refer to the System Upgrade Guidebook for information on the operation of accessories sold separately. Refer to page 88 for operation of [Sound]. Turn the audiovisual source off Select [Audio Off] on the Audiovisual source operation screen. The audio and video stop. To turn audiovisual source back on Select [Audio On] on the Audiovisual source operation screen. The audio and video display is shown. Switch from the Audiovisual screen to the navigation screen Press while the audiovisual screen is displayed. The display switches to the current position screen, but audio output continues. Note: Turn the audiovisual source off to output only navigation sound and image. ( above) Basic audiovisual operations Switch to radio (AM or FM) Select [AM] or [FM] on the Audiovisual source operation screen. The system switches to the Radio operation screen (AM or FM). Radio FM operation screen Tuning Station selection Press . The frequency switches. Seek tuning Press and hold until the frequency changes, then release it. Starts Seek tuning, which stops when a station is received. While the button is held down, stations will not be received even when they are detected. Frequency Auto preset mode indicator Auto presetting Preset stations Tune by selecting a preset number. List selection Frequency Auto presetting Specify the range for Auto presetting [Each]: Perform Auto presetting for the displayed list bands (6 ch). [All]: Perform Auto presetting for the entire list from FM1 to 3 (18 ch).List numbers Stereo indicator Auto preset mode indicator AM operation screen Preset stations Tune by selecting a preset number. EnglishEnglish 7071 71 70
Preset memory
The station being received can be stored manually under
a selected number. (Manual preset)
Select the frequency, then touch and
hold the number under which you
wish to store the frequency for at
least 2 seconds.
The station being received is stored under the
selected number.
Note:
It is also possible to search automatically for
receivable frequencies and store them.
Under FM, 6 channels can be stored for each channel
list (FM1, FM2 and FM3). (18 channels in total)
The channel list switches as shown below, each time
[Band] is selected.
FM1 FM2 FM3
Select a stored station
Selects the stored station.
Select a station (number) from the
Preset stations.
The radio switches to the selected station.
Auto preset memory
Search automatically for receivable stations and store
them. (Up to 18 FM and 6 AM stations)
Touch and hold [Auto. P] for at least
2 seconds.
Auto preset mode is engaged and the Auto
preset mode indicator illuminates.
Stations are stored in order of reception quality. The stored stations are overwritten and updated
every time this operation is performed.
If no receivable stations are found, tuning goes
through the whole frequency range and returns
to the original station.
Note:
Even in Auto preset mode, station selection and
manual preset can still be used.
Under FM, [Each] or [All] can be selected to specify
the Auto presetting range.
[Each]: Auto presetting is performed for the displayed
list band (6 channels). The other two lists are
not subject to Auto preset mode.
[All]: Auto presetting is performed for all lists FM1
to 3 (18 channels).
To cancel Auto preset mode
Select [Auto. P].
Auto preset mode is cancelled. Stations stored under Auto preset mode are
cleared.
The radio returns to the preset station that was
stored before Auto preset mode was engaged.
Disc insert (CD/DVD)
1Press .
The Open/Tilt/Eject screen is displayed.
2Select [Disc].
The monitor opens. If there is a disc inside, it is ejected
automatically.
3Insert a disc.
Printed side
The monitor closes automatically.
Note:
The disc is played automatically after insertion. 3 {8 cm} discs can only be inserted in a 3 {8 cm} disc
cartridge.
The DVD Hint screen
The DVD Hint screen is displayed when a DVD is
inserted. It presents a simple explanation of DVD
operation.
Check the explanation, then select
[OK].
The DVD Hint screen disappears.
Note:
Once [OK] is selected, the DVD Hint screen will not
be displayed again until the engine stops. It appears
again after the engine is restarted or the key is turned
to ACC ON.
Disc eject (CD/DVD)
1Select [Disc] on the Open/Tilt/Eject
screen.
The monitor opens and the disc is ejected.
2Remove the CD/DVD.
Select [Close] to close the monitor. Pressing also closes the monitor.
Play a disc Radio (continued)
EnglishEnglish
7273
73 72
Preset memory
The station being received can be stored manually under
a selected number. (Manual preset)
Select the frequency, then touch and
hold the number under which you
wish to store the frequency for at
least 2 seconds.
The station being received is stored under the
selected number.
Note:
It is also possible to search automatically for
receivable frequencies and store them.
Under FM, 6 channels can be stored for each channel
list (FM1, FM2 and FM3). (18 channels in total)
The channel list switches as shown below, each time
[Band] is selected.
FM1 FM2 FM3
Select a stored station
Selects the stored station.
Select a station (number) from the
Preset stations.
The radio switches to the selected station.
Auto preset memory
Search automatically for receivable stations and store
them. (Up to 18 FM and 6 AM stations)
Touch and hold [Auto. P] for at least
2 seconds.
Auto preset mode is engaged and the Auto
preset mode indicator illuminates.
Stations are stored in order of reception quality. The stored stations are overwritten and updated
every time this operation is performed.
If no receivable stations are found, tuning goes
through the whole frequency range and returns
to the original station.
Note:
Even in Auto preset mode, station selection and
manual preset can still be used.
Under FM, [Each] or [All] can be selected to specify
the Auto presetting range.
[Each]: Auto presetting is performed for the displayed
list band (6 channels). The other two lists are
not subject to Auto preset mode.
[All]: Auto presetting is performed for all lists FM1
to 3 (18 channels).
To cancel Auto preset mode
Select [Auto. P].
Auto preset mode is cancelled. Stations stored under Auto preset mode are
cleared.
The radio returns to the preset station that was
stored before Auto preset mode was engaged.
Disc insert (CD/DVD)
1Press .
The Open/Tilt/Eject screen is displayed.
2Select [Disc].
The monitor opens. If there is a disc inside, it is ejected
automatically.
3Insert a disc.
Printed side
The monitor closes automatically.
Note:
The disc is played automatically after insertion. 3 {8 cm} discs can only be inserted in a 3 {8 cm} disc
cartridge.
The DVD Hint screen
The DVD Hint screen is displayed when a DVD is
inserted. It presents a simple explanation of DVD
operation.
Check the explanation, then select
[OK].
The DVD Hint screen disappears.
Note:
Once [OK] is selected, the DVD Hint screen will not
be displayed again until the engine stops. It appears
again after the engine is restarted or the key is turned
to ACC ON.
Disc eject (CD/DVD)
1Select [Disc] on the Open/Tilt/Eject
screen.
The monitor opens and the disc is ejected.
2Remove the CD/DVD.
Select [Close] to close the monitor. Pressing also closes the monitor.
Play a disc Radio (continued)
EnglishEnglish
7273
73 72
Switch to disc (DVD, CD, MP3/WMA) Select [DISC] (DVD, CD, MP3/WMA) on the Audiovisual source operation screen. The system switches to disc (DVD, CD, MP3/ WMA). The Disc operation screen (DVD, CD, MP3/ WMA) is displayed. Note: Audio and video may be interrupted briefl y while the format is identifi ed. Restrictions on the disc itself may prevent operation from proceeding as described in this manual. (“ ” is displayed on the monitor.) Refer to the disc instructions manual for details. Play a disc (continued) DVD operation screen When the source is switched to DVD, the DVD operation screen is displayed automatically. To display the DVD operation screen manually, press while DVD is the source. Read the section on “Discs that can be played back” carefully. ( page 7) DVD menu Touching the screen during DVD playback displays Short menu 1. Select [NEXT PAGE] and [PREV PAGE] to switch between screens. Short menu 2 This menu can be used for DVD menu operations, etc.[MOVE BUTTONS]: Switches touch key display positions. ( page 80) [] to display the touch keys again. [DIRECT TOUCH]: Turns on or off the direct touch function, for touching DVD menu items directly to select them. If the function is turned off, the cursor keys are displayed. ( page 80) Short menu 1 This menu can be used for DVD playback operations. [DISPLAY]: Adjusts tone. ( page 92) [TOP MENU]/[Menu]: Displays the disc menu (Refer to the instructions provided with the disc being played for how to operate). ( page 79) [HIDE BUTTONS]: Hides the touch keys. []: Fast reverse ( page 77) []: Stop ( page 76) []: Pause ( page 76) []: Play ( page 76) []: Fast forward ( page 77) Short menu 3 This menu can be used for DVD playback-related settings.[SETUP]: Displays the Setup menu. ( page 94) [SEARCH]: Inputs the title number to cue the title. ( page 77) [RETURN]: Moves to a predetermined position on the disc and starts playback from that position. [Audio]: Switches the audio language. ( page 78) [SUB-TITLES]: Switches the subtitle language. ( page 78) [Angle]: Switches the angle. ( page 79) Displays title numbers/chapter numbers Displays the current sound settings and number of channels Note: Aspect setting is fi xed to wide while the Short menu is displayed. Switches the aspect ratio PLAY This screen can be operated while the vehicle is in motion. It is convenient for watching DVD videos on the rear monitor. ( System Upgrade Guidebook) Displays the DVD playback screen Playing time Title No. Chapter No. [PREV PAGE]: Switches to Short menu 2[NEXT PAGE]: Switches to Short menu 1 [PREV PAGE]: Switches to Short menu 1[NEXT PAGE]: Switches to Short menu 3 Note: Refer to page 92 for operation of [ASPECT]. DVDDVD EnglishEnglish 7475 75 74
Switch to disc (DVD, CD, MP3/WMA) Select [DISC] (DVD, CD, MP3/WMA) on the Audiovisual source operation screen. The system switches to disc (DVD, CD, MP3/ WMA). The Disc operation screen (DVD, CD, MP3/ WMA) is displayed. Note: Audio and video may be interrupted briefl y while the format is identifi ed. Restrictions on the disc itself may prevent operation from proceeding as described in this manual. (“ ” is displayed on the monitor.) Refer to the disc instructions manual for details. Play a disc (continued) DVD operation screen When the source is switched to DVD, the DVD operation screen is displayed automatically. To display the DVD operation screen manually, press while DVD is the source. Read the section on “Discs that can be played back” carefully. ( page 7) DVD menu Touching the screen during DVD playback displays Short menu 1. Select [NEXT PAGE] and [PREV PAGE] to switch between screens. Short menu 2 This menu can be used for DVD menu operations, etc.[MOVE BUTTONS]: Switches touch key display positions. ( page 80) [] to display the touch keys again. [DIRECT TOUCH]: Turns on or off the direct touch function, for touching DVD menu items directly to select them. If the function is turned off, the cursor keys are displayed. ( page 80) Short menu 1 This menu can be used for DVD playback operations. [DISPLAY]: Adjusts tone. ( page 92) [TOP MENU]/[Menu]: Displays the disc menu (Refer to the instructions provided with the disc being played for how to operate). ( page 79) [HIDE BUTTONS]: Hides the touch keys. []: Fast reverse ( page 77) []: Stop ( page 76) []: Pause ( page 76) []: Play ( page 76) []: Fast forward ( page 77) Short menu 3 This menu can be used for DVD playback-related settings.[SETUP]: Displays the Setup menu. ( page 94) [SEARCH]: Inputs the title number to cue the title. ( page 77) [RETURN]: Moves to a predetermined position on the disc and starts playback from that position. [Audio]: Switches the audio language. ( page 78) [SUB-TITLES]: Switches the subtitle language. ( page 78) [Angle]: Switches the angle. ( page 79) Displays title numbers/chapter numbers Displays the current sound settings and number of channels Note: Aspect setting is fi xed to wide while the Short menu is displayed. Switches the aspect ratio PLAY This screen can be operated while the vehicle is in motion. It is convenient for watching DVD videos on the rear monitor. ( System Upgrade Guidebook) Displays the DVD playback screen Playing time Title No. Chapter No. [PREV PAGE]: Switches to Short menu 2[NEXT PAGE]: Switches to Short menu 1 [PREV PAGE]: Switches to Short menu 1[NEXT PAGE]: Switches to Short menu 3 Note: Refer to page 92 for operation of [ASPECT]. DVDDVD EnglishEnglish 7475 75 74
Play a disc (continued) Stop Select [] from Short menu 1. Resume playback Select [] from Short menu 1. Playback starts from where it stopped. Fast forward/Fast reverse Press and hold . Fast forward or fast reverse continues while the button is pressed. Press and hold to fast forward. Press and hold to fast reverse. Release to return to normal playback. Depressing [] or [] from Short menu 1 will also cause fast forward/reverse. Select chapter/title Chapter selection Press . Press to play from the next chapter. Press to play the currently playing chapter from the beginning. Press twice or more to play the preceding chapter. Input the title number to cue the title 1Select [SEARCH] from Short menu 3. 2Enter the title number and select [Enter]. Playback starts from the input title number. If there is no title on the DVD matching the input title number, the currently playing title continues. Select [] to delete one character. Select [] to return to the title number input screen. Pause Select [] from Short menu 1. Resume playback Select [] from Short menu 1. Playback resumes from where it stopped. [] can also be selected to start playback. Slow playback Touch and hold [] while playback is paused. Slow playback continues for as long as it is touched. Release to return to pause. DVDDVD EnglishEnglish 7677 77 76
Play a disc (continued) Stop Select [] from Short menu 1. Resume playback Select [] from Short menu 1. Playback starts from where it stopped. Fast forward/Fast reverse Press and hold . Fast forward or fast reverse continues while the button is pressed. Press and hold to fast forward. Press and hold to fast reverse. Release to return to normal playback. Depressing [] or [] from Short menu 1 will also cause fast forward/reverse. Select chapter/title Chapter selection Press . Press to play from the next chapter. Press to play the currently playing chapter from the beginning. Press twice or more to play the preceding chapter. Input the title number to cue the title 1Select [SEARCH] from Short menu 3. 2Enter the title number and select [Enter]. Playback starts from the input title number. If there is no title on the DVD matching the input title number, the currently playing title continues. Select [] to delete one character. Select [] to return to the title number input screen. Pause Select [] from Short menu 1. Resume playback Select [] from Short menu 1. Playback resumes from where it stopped. [] can also be selected to start playback. Slow playback Touch and hold [] while playback is paused. Slow playback continues for as long as it is touched. Release to return to pause. DVDDVD EnglishEnglish 7677 77 76
Play a disc (continued) Switch the audio language If the disc contains multiple audio languages, the audio language can be switched. 1Select [Audio] from Short menu 3. The audio numbers and languages are displayed. 2Select [Audio]. The audio languages switch each time [Audio] is selected. Note: The preferred playback language can be set. ( page 94) Switch the subtitle language If the disc contains multiple subtitle languages, the subtitle language can be switched. 1Select [SUB-TITLES] from Short menu 3. The subtitle numbers and languages are displayed. 2Select [SUB-TITLES]. The subtitle languages switch each time [SUB-TITLES] is selected. The subtitle displays toggle between show and hide each time [Hide] is selected. The switch is displayed in bold-faced type when the subtitles are hidden. In some cases it may take time for the subtitles to appear. Note: The preferred display language can be set. ( page 94) Switch the angle If the disc contains multiple angles, the angle can be switched. 1Select [Angle] from Short menu 3. 2Select [Angle]. The angle switches each time [Angle] is selected. Note: If the multi-angle mark display is switched on under DVD Setup menu ( page 94), the angle mark is displayed in the upper right of the screen when angle switching is possible. Audio language, subtitle language and angle In some cases it may only be possible to switch these functions from the top menu or from DVD Setup menu. ( page 94) When the power is turned on or the disc is changed, the language set under DVD settings is prioritized as the audio and subtitle language. The number of audio languages, subtitle languages and angles varies between discs. Refer to the disc instructions for details. Display the top menu The top menu varies between discs. Refer to the disc instructions for details. Select [TOP MENU] from Short menu 1. The top menu is displayed. Short menu 2 is displayed. Refer to page 80 for item selections. Display the title menu The title menu varies between discs. Refer to the disc instructions for details. Select [Menu] from Short menu 1. The title menu is displayed. Short menu 2 is displayed. Refer to page 80 for item selections. DVDDVD EnglishEnglish 7879 79 78
Play a disc (continued) Switch the audio language If the disc contains multiple audio languages, the audio language can be switched. 1Select [Audio] from Short menu 3. The audio numbers and languages are displayed. 2Select [Audio]. The audio languages switch each time [Audio] is selected. Note: The preferred playback language can be set. ( page 94) Switch the subtitle language If the disc contains multiple subtitle languages, the subtitle language can be switched. 1Select [SUB-TITLES] from Short menu 3. The subtitle numbers and languages are displayed. 2Select [SUB-TITLES]. The subtitle languages switch each time [SUB-TITLES] is selected. The subtitle displays toggle between show and hide each time [Hide] is selected. The switch is displayed in bold-faced type when the subtitles are hidden. In some cases it may take time for the subtitles to appear. Note: The preferred display language can be set. ( page 94) Switch the angle If the disc contains multiple angles, the angle can be switched. 1Select [Angle] from Short menu 3. 2Select [Angle]. The angle switches each time [Angle] is selected. Note: If the multi-angle mark display is switched on under DVD Setup menu ( page 94), the angle mark is displayed in the upper right of the screen when angle switching is possible. Audio language, subtitle language and angle In some cases it may only be possible to switch these functions from the top menu or from DVD Setup menu. ( page 94) When the power is turned on or the disc is changed, the language set under DVD settings is prioritized as the audio and subtitle language. The number of audio languages, subtitle languages and angles varies between discs. Refer to the disc instructions for details. Display the top menu The top menu varies between discs. Refer to the disc instructions for details. Select [TOP MENU] from Short menu 1. The top menu is displayed. Short menu 2 is displayed. Refer to page 80 for item selections. Display the title menu The title menu varies between discs. Refer to the disc instructions for details. Select [Menu] from Short menu 1. The title menu is displayed. Short menu 2 is displayed. Refer to page 80 for item selections. DVDDVD EnglishEnglish 7879 79 78
Play a disc (continued) Top menu and title menu operations Use direct touch to select Menu items can be selected by touching them directly (the direct touch function). Preparation: When the direct touch function is off (when the cursor keys are displayed), select [DIRECT TOUCH] to turn the direct function on. Touch items in the top menu or title menu to select them. The display switches to the selected item. Note: The menu items included differ between discs. Functions may not always follow user operations, as playback differs according to the content of the disc. Direct touch may not be usable with some discs. In that case, use the cursor keys to make selections. If direct touch is switched on, the screen mode is fi xed to wide, provided there is an item that can be selected for the DVD image. Select [] to display the touch keys. When an item was selected but the unit did not recognize which item was selected, the screen near the selected area is enlarged. If this occurs, select the item again. Use the cursor keys to select The cursor keys can be used to select menu items. 1Select [DIRECT TOUCH] from Short menu 2. The cursor keys are displayed. Select [DIRECT TOUCH] again to turn the direct touch function on. When the direct touch function is turned on, the cursor keys disappear. 2Use the cursor keys to select an item, then select [Enter]. The display switches to the selected item. Change the display positions of touch keys Select [MOVE BUTTONS] from Short menu 2. The display position changes between top and bottom every time the item is selected. CD operation screen * Only displayed with CD-Text compatible discs. Note: dts CD cannot be played. CD EXTRA video cannot be played. MP3/ WMA operation screen Select track/fi le Press . Press to play from the next track/fi le. Press to play the currently playing track/ fi le from the beginning. Press twice or more to play the preceding track/fi le. Folder selection Select [] or []. Starts playing the fi rst track in the selected folder. Fast forward/Fast reverse Press and hold . Fast forward or fast reverse continues while button is pressed. Press and hold to fast forward. Press and hold to fast reverse. Release to return to normal playback. Note: For a CD, [] or [] on the CD operation screen can also be selected to fast forward/fast reverse. [ ]: Touch and hold the button to fast forward. [ ]: Touch and hold the button to fast reverse. Release to return to normal playback. Scan play Random play Repeat play Fast forward/Fast reverseTrack name* Disc name* Displays the Folder list Folder selectionFile name Folder name Scan play Random play Repeat playFolder Scan play Folder Random play Folder Repeat play DVDCD/MP3/WMA EnglishEnglish 8081 81 80