Panasonic Dual DIN HDD Mobile Navigation System Cn Nvd905u System Upgrade Guidebook

							XM Satellite Radio control (continued)
Select a category
  To turn the category selection on
1Select [Setup].
   The XM Setup screen is displayed.
2Select [On] from “Category”.
   Select [Off] to turn the category selection off.
  To select a category
Select [] or [].
   The category switches.
Note:
   It is not possible to select a category if “Category” is 
set to [Off].
Preset memory
The channel being received can be stored manually 
under a selected number. 
Select the channel, then touch and 
hold the number under which you 
wish to store the channel for at least 
2 seconds.
   The channel being received is stored under the 
selected number.
Note:
   6 channels can be stored for each channel list (XM1, 
XM2, and XM3). (18 channels in total)
   Select [Band] to switch between channel lists.
   The channel list switches as shown below each time 
[Band] is selected.
  Select a stored channel
Select a channel (number) from the 
preset channels.
   The channel switches to the selected channel.
XM1 XM2 XM3XM1 XM2 XM3
Traffi c information
Stores only one traffi c channel, either SIRIUS Satellite 
Radio or XM Satellite Radio, so it can be called easily 
from any Audiovisual source operation screen.
Select the channel, then touch and 
hold [Traffi c] for 2 seconds or longer.
(Example: SIRIUS operation screen)
   The channel being received is stored.
  Select a stored channel
Select [Traffi c].
(Example: SIRIUS operation screen)
Note:
   This function cannot be used if neither SIRIUS 
Satellite Radio nor XM Satellite Radio is connected.
   Channels which are parental locked cannot be stored.
EnglishEnglish
1011
11 10        
						

							Preparation:   Connect an iPod with the Direct cable for iPod 
(CA-DC300U, option).
Controllable iPod/
software version
   3rd generation iPod/ver. 2.2 – 2.3   4th generation iPod/ver. 3.0.2 – 3.1   5th generation iPod/ver. 1.0 
(Video and photos cannot be displayed.)
   iPod Photo/ver. 1.0 – 1.2 
(Photos cannot be displayed.)
   iPod mini/ver. 1.2 – 1.4   iPod nano/ver. 1.0
*   Operation has been con rmed for software available 
at the end of February, 2007. We do not guarantee 
proper operation with our future products or upgraded 
software.
Note:
   Do not attach or detach the iPod while iPod is on. 
Noise is generated which could damage the speakers.
   Use a holder or other means to ensure the iPod does 
not move while the vehicle is in motion.
   Do not leave the iPod for long periods of time where 
the inside of the vehicle will get hot.
   Also refer to the installation manual for the iPod to be 
connected.
   After turning the engine off (switching from ACC to 
OFF), always disconnect the iPod. If the iPod is left 
connected, its power may not turn off, causing its 
battery to run down.
   Please note that no compensation will be provided for 
data lost from the iPod while it is used connected to 
the main unit.
   The iPod is licensed for duplication and playback 
of material that is uncopyrighted, or may legally 
be duplicated or played for individual private use. 
Infringement of copyright is prohibited by law.
   Do not connect iPod accessories such as a remote 
control unit or headphones while the iPod is 
connected to the main unit. They may not function 
normally in some cases.
   The iPod can only play music data.   The iPod Shuf e is not compatible.
Switch to iPod
Select [iPod] on the Audiovisual 
source operation screen. 
( Operating Instructions)
   The iPod operation screen is displayed.   Plays the track.
Note:
   “Communication error” appears until the iPod is 
recognized after connecting the iPod, turning on the 
power of the main unit, or performing source selection 
on the main unit. This indicates there is nothing wrong 
with the main unit.
   We do not guarantee operation of all the functions of 
the iPod to be connected.
   Only iPods equipped with a dock connector can be 
connected.
   is displayed even if only the connecting cable 
(CA-DC300U, option) is connected to the unit.
iPod operation screen
Select track
Press .
  Press  to play from the next track.  Press  to play the currently playing track 
from the beginning. Press twice or more to play 
the preceding track.
Fast forward/Fast reverse
Press and hold .
   Fast forward or fast reverse continues while the 
button is pressed.
   Press and hold 
 to fast forward.
   Press and hold 
 to fast reverse.   Release to return to normal playback.   Touching and holding [] or [] on 
the iPod operation screen will also cause fast 
forward/fast reverse.
Shuffl e play
  To shuffl e tracks
Select .
Illuminates 
when On.
   All tracks are played in random order.   Track shuf e indicator illuminates.  Select  again to cancel shuf e play.
  To shuffl e albums
Touch and hold  for at least 
1 second.
Illuminates 
when On.
   Albums are played in random order. (Tracks on 
albums are not played at random.)
   Album shuf e indicator illuminates.  Select  again to cancel shuf e play.
iPod control
Connecting an iPod to the system
  To connect the iPod
   iPod Direct cable for iPod 
(CA-DC300U, option)
  Dock connector port
   The iPod cannot be operated with its own 
controls.
   The iPod charges while it is connected to the 
main unit.
  To disconnect the iPod
  Detach while pressing.
Playing time
Fast forward/Fast reverse
Displays the Track list  Album name  Track name  Artist name
Displays the Music menu
Shuffl e play
Repeat play
EnglishEnglish
1213
13 12          
						

							Preparation:   Connect an iPod with the Direct cable for iPod 
(CA-DC300U, option).
Controllable iPod/
software version
   3rd generation iPod/ver. 2.2 – 2.3   4th generation iPod/ver. 3.0.2 – 3.1   5th generation iPod/ver. 1.0 
(Video and photos cannot be displayed.)
   iPod Photo/ver. 1.0 – 1.2 
(Photos cannot be displayed.)
   iPod mini/ver. 1.2 – 1.4   iPod nano/ver. 1.0
*   Operation has been con rmed for software available 
at the end of February, 2007. We do not guarantee 
proper operation with our future products or upgraded 
software.
Note:
   Do not attach or detach the iPod while iPod is on. 
Noise is generated which could damage the speakers.
   Use a holder or other means to ensure the iPod does 
not move while the vehicle is in motion.
   Do not leave the iPod for long periods of time where 
the inside of the vehicle will get hot.
   Also refer to the installation manual for the iPod to be 
connected.
   After turning the engine off (switching from ACC to 
OFF), always disconnect the iPod. If the iPod is left 
connected, its power may not turn off, causing its 
battery to run down.
   Please note that no compensation will be provided for 
data lost from the iPod while it is used connected to 
the main unit.
   The iPod is licensed for duplication and playback 
of material that is uncopyrighted, or may legally 
be duplicated or played for individual private use. 
Infringement of copyright is prohibited by law.
   Do not connect iPod accessories such as a remote 
control unit or headphones while the iPod is 
connected to the main unit. They may not function 
normally in some cases.
   The iPod can only play music data.   The iPod Shuf e is not compatible.
Switch to iPod
Select [iPod] on the Audiovisual 
source operation screen. 
( Operating Instructions)
   The iPod operation screen is displayed.   Plays the track.
Note:
   “Communication error” appears until the iPod is 
recognized after connecting the iPod, turning on the 
power of the main unit, or performing source selection 
on the main unit. This indicates there is nothing wrong 
with the main unit.
   We do not guarantee operation of all the functions of 
the iPod to be connected.
   Only iPods equipped with a dock connector can be 
connected.
   is displayed even if only the connecting cable 
(CA-DC300U, option) is connected to the unit.
iPod operation screen
Select track
Press .
  Press  to play from the next track.  Press  to play the currently playing track 
from the beginning. Press twice or more to play 
the preceding track.
Fast forward/Fast reverse
Press and hold .
   Fast forward or fast reverse continues while the 
button is pressed.
   Press and hold 
 to fast forward.
   Press and hold 
 to fast reverse.   Release to return to normal playback.   Touching and holding [] or [] on 
the iPod operation screen will also cause fast 
forward/fast reverse.
Shuffl e play
  To shuffl e tracks
Select .
Illuminates 
when On.
   All tracks are played in random order.   Track shuf e indicator illuminates.  Select  again to cancel shuf e play.
  To shuffl e albums
Touch and hold  for at least 
1 second.
Illuminates 
when On.
   Albums are played in random order. (Tracks on 
albums are not played at random.)
   Album shuf e indicator illuminates.  Select  again to cancel shuf e play.
iPod control
Connecting an iPod to the system
  To connect the iPod
   iPod Direct cable for iPod 
(CA-DC300U, option)
  Dock connector port
   The iPod cannot be operated with its own 
controls.
   The iPod charges while it is connected to the 
main unit.
  To disconnect the iPod
  Detach while pressing.
Playing time
Fast forward/Fast reverse
Displays the Track list  Album name  Track name  Artist name
Displays the Music menu
Shuffl e play
Repeat play
EnglishEnglish
1213
13 12          
						

							Using with a rear monitor
Audiovisual function images from the main unit are 
displayed on the rear monitor. When 
 is pressed 
while the Audiovisual screen displays, the navigation 
screen displays on the main unit while the selected 
image is output to the rear monitor. 
[DVD, AV only]
Display the Audiovisual screen on the 
rear monitor
Example:  The Audiovisual screen is displayed on the 
rear monitor while the navigation screen is 
displayed.
Repeat play
Select .
Illuminates 
when On.
   The track being played is played repeatedly.   1 track indicator illuminates.  Select  again to cancel repeat play.
Track list
All tracks to be played are listed.
Select [Track List].
   The track being played is displayed in bold.   Select a track to play that track.   :   Moves the cursor to the previous/next 
screen.
 
  :   Moves the cursor to the previous/next 
item.
Select a track from the list
1Select [Music Menu].
   The iPod Music Menu screen is displayed.
2Select the list to display.
   The list screens are displayed.
3Select [Play] for the items to play 
from the list.
   Plays the selected items.   Select [Main] to return to the iPod operation 
screen.
   :   Moves the cursor to the previous/next 
screen.
 
  :   Moves the cursor to the previous/next 
item.
When an item is selected, the track list within the 
item is displayed.
   Select a track to play that track.
Note:
   Category registration on the iPod itself is required for 
use of lists.
TV tuner control
Preparation:   Connect a TV tuner (CY-TUN153U, option) to the 
unit.
   You must install the TV antenna to receive TV 
broadcasts.
   To receive TV broadcasts, park your car in an 
area free from any obstacles that would impede 
reception.
Switch to TV
Select [AV] on the Audiovisual 
source operation screen. 
(Operating Instructions)
   TV (AV) operation screen is displayed.
   When [PICTURE] is selected, the image is 
displayed.
   Refer to the Operating Instructions for operation 
of [Sound] and [ASPECT].
AV menu
Touch the screen while video is displayed to display the 
AV menu.
   Refer to the Operating Instructions for [Display] 
operations.
  Select [Hide Buttons] to close the AV menu.
Note:
   For TV operation, use the remote control unit provided 
with the TV tuner (CY-TUN153U, option), pointing it 
towards the remote control signal sensor of the main 
unit.
   Refer to the TV tuner instruction manual for details of 
its operation.
Rear monitor
Preparation:   Connect a rear monitor to the unit.
iPod control (continued)
[Rear monitor]   The selected source is displayed.   Switch the rear monitor to the input mode that 
is connected to the main unit. (video input, etc.)
[Main unit]   The navigation screen is displayed.
EnglishEnglish
1415
15 14                      
						

							Using with a rear monitor
Audiovisual function images from the main unit are 
displayed on the rear monitor. When 
 is pressed 
while the Audiovisual screen displays, the navigation 
screen displays on the main unit while the selected 
image is output to the rear monitor. 
[DVD, AV only]
Display the Audiovisual screen on the 
rear monitor
Example:  The Audiovisual screen is displayed on the 
rear monitor while the navigation screen is 
displayed.
Repeat play
Select .
Illuminates 
when On.
   The track being played is played repeatedly.   1 track indicator illuminates.  Select  again to cancel repeat play.
Track list
All tracks to be played are listed.
Select [Track List].
   The track being played is displayed in bold.   Select a track to play that track.   :   Moves the cursor to the previous/next 
screen.
 
  :   Moves the cursor to the previous/next 
item.
Select a track from the list
1Select [Music Menu].
   The iPod Music Menu screen is displayed.
2Select the list to display.
   The list screens are displayed.
3Select [Play] for the items to play 
from the list.
   Plays the selected items.   Select [Main] to return to the iPod operation 
screen.
   :   Moves the cursor to the previous/next 
screen.
 
  :   Moves the cursor to the previous/next 
item.
When an item is selected, the track list within the 
item is displayed.
   Select a track to play that track.
Note:
   Category registration on the iPod itself is required for 
use of lists.
TV tuner control
Preparation:   Connect a TV tuner (CY-TUN153U, option) to the 
unit.
   You must install the TV antenna to receive TV 
broadcasts.
   To receive TV broadcasts, park your car in an 
area free from any obstacles that would impede 
reception.
Switch to TV
Select [AV] on the Audiovisual 
source operation screen. 
(Operating Instructions)
   TV (AV) operation screen is displayed.
   When [PICTURE] is selected, the image is 
displayed.
   Refer to the Operating Instructions for operation 
of [Sound] and [ASPECT].
AV menu
Touch the screen while video is displayed to display the 
AV menu.
   Refer to the Operating Instructions for [Display] 
operations.
  Select [Hide Buttons] to close the AV menu.
Note:
   For TV operation, use the remote control unit provided 
with the TV tuner (CY-TUN153U, option), pointing it 
towards the remote control signal sensor of the main 
unit.
   Refer to the TV tuner instruction manual for details of 
its operation.
Rear monitor
Preparation:   Connect a rear monitor to the unit.
iPod control (continued)
[Rear monitor]   The selected source is displayed.   Switch the rear monitor to the input mode that 
is connected to the main unit. (video input, etc.)
[Main unit]   The navigation screen is displayed.
EnglishEnglish
1415
15 14                      
						

							Bluetooth hands-free kit
Preparation:   Connect the Bluetooth hands-free kit (CY-BT100U, 
option) and establish the pairing. Refer to the 
instruction manual for the Bluetooth hands-free kit 
for further information.
Connection of the optional Bluetooth hands-free kit allows 
users to talk on a handsfree cellular phone in the car.
Note:   The Bluetooth word mark and logo are owned by 
the Bluetooth SIG, Inc. and any use of such marks 
by Matsushita Electric Industrial Co., Ltd. is under 
license. Other trademarks and trade name are those of 
their respective owners.
Switch to Bluetooth hands-free
This mode is not selectable by pressing  or 
touching an item on the panel, but activated by receiving 
an incoming call. (To pick up the phone, press [Hang-on] 
on the hands-free kit.)
Note:
   We do not guarantee use of all the functions of the 
Bluetooth-ready mobile phone to be connected.
[Hang-on]/Blue LED
[Hang-up]/Red LED
Switch unit of Bluetooth hands-free kit
Receiving a call
1When a call is received, the 
Bluetooth hands free screen is 
displayed.
   The telephone number of the calling party is 
displayed.
2Press [Hang-on] on the Bluetooth 
hands-free kit to answer the phone.
   Speak towards the microphone of the Bluetooth 
hands-free kit.
Note:
   Reception of a call when power is off does not turn on 
the power of this unit.
   “CONNECT” is displayed when information of the 
calling party cannot be acquired.
Calling back
Calls can only be placed to the last number displayed on 
Receiving a call (
 above).
1Press [Hang-on] on the hands-free kit.
   The Bluetooth hands free screen is displayed.
2Check the number, then press 
[Hang-on] on the Bluetooth 
hands-free kit again.
   Once the call is connected, speak towards the 
microphone of the Bluetooth hands-free kit.
Hang up
Press [Hang-up] on the Bluetooth 
hands-free kit while talking.
   The call is ended and the screen returns to the 
original display.
Adjust volume
It can adjust the hands-free ring and talk volume when a 
call is received. (The Bluetooth hands free screen is only 
displayed.)
Select the volume.
Minimum Middle Maximum
Note:
   The speaker that outputs the hands-free talk can be 
set. (
 Operating Instructions)
Set the ring tone
If the cellular phone has a “no in-band ringing” 
speci cation, it can be set to ring or not ring when a call 
is received.
Select [On] or [Off] from Ringing.
  [On]: Rings.
  [Off]: Does not ring.
Note:   If the cellular phone does not have the no in-band 
ringing speci cation, it is not possible to set to ring or 
not ring. (Touch keys are not displayed either.)
Switch to the rear view camera screen
Move the vehicle shift lever to reverse.
   The rear view camera image is displayed.  Press ,  or  to cancel the rear 
view camera display.
  To display manually
Consult the dealer regarding the camera and its 
installation.
Select [Rear View] from the 
Information menu. 
(Operating Instructions)
   The rear view camera image is displayed.  Press ,  or  to cancel the rear 
view camera display.
Rear view camera menu
Touch the screen while image is displayed to display the 
rear view camera menu.
  Refer to the Operating Instructions for [Display] operations.  Select [Hide Buttons] to close the Rear view camera menu.
Rear view camera
Preparation:   Connect a rear view camera to the unit.   Set “Rear View Camera” to [On] on the Install. 
Setting screen. (
 Operating Instructions)
EnglishEnglish
1617
17 16        
						

							Bluetooth hands-free kit
Preparation:   Connect the Bluetooth hands-free kit (CY-BT100U, 
option) and establish the pairing. Refer to the 
instruction manual for the Bluetooth hands-free kit 
for further information.
Connection of the optional Bluetooth hands-free kit allows 
users to talk on a handsfree cellular phone in the car.
Note:   The Bluetooth word mark and logo are owned by 
the Bluetooth SIG, Inc. and any use of such marks 
by Matsushita Electric Industrial Co., Ltd. is under 
license. Other trademarks and trade name are those of 
their respective owners.
Switch to Bluetooth hands-free
This mode is not selectable by pressing  or 
touching an item on the panel, but activated by receiving 
an incoming call. (To pick up the phone, press [Hang-on] 
on the hands-free kit.)
Note:
   We do not guarantee use of all the functions of the 
Bluetooth-ready mobile phone to be connected.
[Hang-on]/Blue LED
[Hang-up]/Red LED
Switch unit of Bluetooth hands-free kit
Receiving a call
1When a call is received, the 
Bluetooth hands free screen is 
displayed.
   The telephone number of the calling party is 
displayed.
2Press [Hang-on] on the Bluetooth 
hands-free kit to answer the phone.
   Speak towards the microphone of the Bluetooth 
hands-free kit.
Note:
   Reception of a call when power is off does not turn on 
the power of this unit.
   “CONNECT” is displayed when information of the 
calling party cannot be acquired.
Calling back
Calls can only be placed to the last number displayed on 
Receiving a call (
 above).
1Press [Hang-on] on the hands-free kit.
   The Bluetooth hands free screen is displayed.
2Check the number, then press 
[Hang-on] on the Bluetooth 
hands-free kit again.
   Once the call is connected, speak towards the 
microphone of the Bluetooth hands-free kit.
Hang up
Press [Hang-up] on the Bluetooth 
hands-free kit while talking.
   The call is ended and the screen returns to the 
original display.
Adjust volume
It can adjust the hands-free ring and talk volume when a 
call is received. (The Bluetooth hands free screen is only 
displayed.)
Select the volume.
Minimum Middle Maximum
Note:
   The speaker that outputs the hands-free talk can be 
set. (
 Operating Instructions)
Set the ring tone
If the cellular phone has a “no in-band ringing” 
speci cation, it can be set to ring or not ring when a call 
is received.
Select [On] or [Off] from Ringing.
  [On]: Rings.
  [Off]: Does not ring.
Note:   If the cellular phone does not have the no in-band 
ringing speci cation, it is not possible to set to ring or 
not ring. (Touch keys are not displayed either.)
Switch to the rear view camera screen
Move the vehicle shift lever to reverse.
   The rear view camera image is displayed.  Press ,  or  to cancel the rear 
view camera display.
  To display manually
Consult the dealer regarding the camera and its 
installation.
Select [Rear View] from the 
Information menu. 
(Operating Instructions)
   The rear view camera image is displayed.  Press ,  or  to cancel the rear 
view camera display.
Rear view camera menu
Touch the screen while image is displayed to display the 
rear view camera menu.
  Refer to the Operating Instructions for [Display] operations.  Select [Hide Buttons] to close the Rear view camera menu.
Rear view camera
Preparation:   Connect a rear view camera to the unit.   Set “Rear View Camera” to [On] on the Install. 
Setting screen. (
 Operating Instructions)
EnglishEnglish
1617
17 16        
						

							iPod
ProblemPossible cause  Possible solution
The iPod does not 
function normally.
The iPod was not recognized correctly.
  Check the connection.
  Reset the iPod, then connect it again.
The iPod is an old version.
  Update the iPod version, then connect it again.
There is a “bump” 
sound at the start of a 
track during playback.
There is no problem with the iPod or the system.
The iPod continues to 
display “
 Strada” 
even after it has been 
disconnected from the 
system.
Reset the iPod.
XM Satellite Radio control
ProblemPossible cause  Possible solution
Channel unselectable
No contract with XM Satellite Radio Inc..
  Refer to page 8 of this book and the XM’s website to sign up for XM radio 
service.
Troubleshooting
VCR, Camcorder, Rear view camera, Rear monitor
ProblemPossible cause  Possible solution
The picture from a car 
navigation system is 
not displayed.
The connection of a car navigation system is not correct.
  Connect it correctly.
The picture from a 
VCR or a camcorder is 
not displayed.A VCR or camcorder is not connected correctly.
  Connect a VCR or camcorder correctly.
The picture from a rear 
view camera is not 
displayed.Rear view camera is not connected correctly.
  Connect a rear view camera correctly.
“Rear View Camera” is set to [Off] under Install. Setting screen.
  Set “Rear View Camera” to [On].
Error display messages
ProblemPossible cause  Possible solution
   XM Satellite Radio control
NO XMCannot receive XM Satellite Radio.
  Verify the wiring.
CHECK ANTENNAXM antenna unconnected.
  Connect the XM antenna.
NO SIGNALXM broadcasts unreceivable because of poor receiving conditions.
  Move to an area where XM broadcasts can be received well.
OFF AIRChannel is not in service.
  This channel is not currently in service. Select another channel.
   SIRIUS Satellite Radio control
NO SIRIUSCannot receive SIRIUS Satellite Radio.
  Verify the wiring.
ANTENNA ERRORSIRIUS antenna unconnected.
  Connect the SIRIUS antenna.
ACQUIRING SIGNALSIRIUS broadcasts unreceivable because of poor receiving conditions.
  Move to an area where SIRIUS broadcasts can be received well.
Call 888-539-SIRIUS
User’s registration has not been carried out.
  Complete user’s registration.
A channel that is not included in the agreement was selected.
  Select a channel that is included in the agreement. Refer to the operating 
instructions for SIRIUS Satellite Radio Tuner with regard to the agreement.
SUB UPDATED
The subscription information was updated.
  Wait for 3 minutes in the SIRIUS mode.
Your location is out of the reception area (for example, in a tunnel), or the unit is 
decoding a selected broadcast. The display appears also while the connections are 
being checked after the power has been turned on.
  Wait until getting out of the unreceivable area or completing the decoding.
  iPod control
Communication errorThe iPod cable was disconnected in the iPod mode.
  Reconnect the iPod cable.
No dataYour iPod has no playable music.
  Download playable music to your iPod.
If you suspect something wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, 
it is recommended to take the unit to your nearest 
authorized Panasonic Servicenter. The product should 
be serviced only by quali ed personnel. Please refer 
checking and repair to professionals. 
Panasonic shall not be liable for any accidents arising 
out of neglect of checking the unit or your own repair 
after your checking. 
Never take measures except those indicated by 
italic letters in “Possible solution” described below 
because those are too dangerous for users to handle 
themselves. 
 Warning 
   If the unit is out of order (no power, no sound) or 
in an abnormal state (has foreign objects in it, is 
exposed to water, is smoking, or smells), turn it 
off immediately and consult your dealer.
   Do not disassemble, modify the unit or attempt to 
repair the product yourself. If the product needs to 
be repaired, consult your dealer or an authorized 
Panasonic Servicenter.
EnglishEnglish
1819
19 18 
						

							iPod
ProblemPossible cause  Possible solution
The iPod does not 
function normally.
The iPod was not recognized correctly.
  Check the connection.
  Reset the iPod, then connect it again.
The iPod is an old version.
  Update the iPod version, then connect it again.
There is a “bump” 
sound at the start of a 
track during playback.
There is no problem with the iPod or the system.
The iPod continues to 
display “
 Strada” 
even after it has been 
disconnected from the 
system.
Reset the iPod.
XM Satellite Radio control
ProblemPossible cause  Possible solution
Channel unselectable
No contract with XM Satellite Radio Inc..
  Refer to page 8 of this book and the XM’s website to sign up for XM radio 
service.
Troubleshooting
VCR, Camcorder, Rear view camera, Rear monitor
ProblemPossible cause  Possible solution
The picture from a car 
navigation system is 
not displayed.
The connection of a car navigation system is not correct.
  Connect it correctly.
The picture from a 
VCR or a camcorder is 
not displayed.A VCR or camcorder is not connected correctly.
  Connect a VCR or camcorder correctly.
The picture from a rear 
view camera is not 
displayed.Rear view camera is not connected correctly.
  Connect a rear view camera correctly.
“Rear View Camera” is set to [Off] under Install. Setting screen.
  Set “Rear View Camera” to [On].
Error display messages
ProblemPossible cause  Possible solution
   XM Satellite Radio control
NO XMCannot receive XM Satellite Radio.
  Verify the wiring.
CHECK ANTENNAXM antenna unconnected.
  Connect the XM antenna.
NO SIGNALXM broadcasts unreceivable because of poor receiving conditions.
  Move to an area where XM broadcasts can be received well.
OFF AIRChannel is not in service.
  This channel is not currently in service. Select another channel.
   SIRIUS Satellite Radio control
NO SIRIUSCannot receive SIRIUS Satellite Radio.
  Verify the wiring.
ANTENNA ERRORSIRIUS antenna unconnected.
  Connect the SIRIUS antenna.
ACQUIRING SIGNALSIRIUS broadcasts unreceivable because of poor receiving conditions.
  Move to an area where SIRIUS broadcasts can be received well.
Call 888-539-SIRIUS
User’s registration has not been carried out.
  Complete user’s registration.
A channel that is not included in the agreement was selected.
  Select a channel that is included in the agreement. Refer to the operating 
instructions for SIRIUS Satellite Radio Tuner with regard to the agreement.
SUB UPDATED
The subscription information was updated.
  Wait for 3 minutes in the SIRIUS mode.
Your location is out of the reception area (for example, in a tunnel), or the unit is 
decoding a selected broadcast. The display appears also while the connections are 
being checked after the power has been turned on.
  Wait until getting out of the unreceivable area or completing the decoding.
  iPod control
Communication errorThe iPod cable was disconnected in the iPod mode.
  Reconnect the iPod cable.
No dataYour iPod has no playable music.
  Download playable music to your iPod.
If you suspect something wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, 
it is recommended to take the unit to your nearest 
authorized Panasonic Servicenter. The product should 
be serviced only by quali ed personnel. Please refer 
checking and repair to professionals. 
Panasonic shall not be liable for any accidents arising 
out of neglect of checking the unit or your own repair 
after your checking. 
Never take measures except those indicated by 
italic letters in “Possible solution” described below 
because those are too dangerous for users to handle 
themselves. 
 Warning 
   If the unit is out of order (no power, no sound) or 
in an abnormal state (has foreign objects in it, is 
exposed to water, is smoking, or smells), turn it 
off immediately and consult your dealer.
   Do not disassemble, modify the unit or attempt to 
repair the product yourself. If the product needs to 
be repaired, consult your dealer or an authorized 
Panasonic Servicenter.
EnglishEnglish
1819
19 18 
						

							Panasonic Consumer
Electronics Company,
Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Puerto Rico, Inc. 
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
http://www.panasonic.com
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario
L4W 2T3
http://www.panasonic.ca
© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.    YEFM285972  F0107-1037 
© 2007 Matsushita Electric Industrial Co., Ltd. Tous droits réservés.
 Printed in Japan
 Imprimé au Japon
 Impreso en Japan
Dual DIN in-dash HDD Mobile Navigation System with 7 Widescreen Color 
LCD Monitor/DVD Receiver
Système de navigation embarqué à disque dur de format 2-DIN 
avec récepteur DVD/moniteur couleur ACL grand écran de 7 po
Sistema de navegación portátil de doble DIN para tablero de mandos, con 
disco duro y monitor LCD panorámico de 7 en color y receptor con DVD
 
 CN-NVD905U
Operating Instructions
Manuel d’instructions
Manual de Instrucciones
   Please read these instructions (including “Limited Warranty” and “Customer 
services directory”) carefully before using this product and keep this manual for 
future reference.
  Prière de lire attentivement ces instructions (y compris la « Garantie limitée » et le 
« Répertoire des services à la clientèle ») avant d’utiliser ce produit et conserver ce 
manuel d’instructions pour s’y référer ultérieurement. 
   Lea con atención estas instrucciones antes de utilizar el producto y guarde este 
manual para poderlo consultar en el futuro.