Panasonic Electronic Board UB-T780 Operating Instructions

Installation Manual (for qualified service personnel)
•Request assembly of the Electronic Board, stand and wall mounting from your dealer.
• Before assembly and construction, read this section thoroughly.
• When installing the elite Panaboard on a wall or on the stand, perform installation with 2 people.
For Your Safety
To prevent severe injury and loss of life, read this
section carefully before using the unit to ensure proper
and safe operation of your unit.
The following graphic symbols are used in...

After installing or moving the electronic
board, lock the casters and set the fall-
prevention extension legs.
If the unit is hung on a wall, confirm the
wall must be capable of supporting at least
the following weight.
1,005 N [103k
gf (227 lbs)] Do not attach the electronic board to mor-
tared walls. Accidental electric leakage
from the wall mounting plate bolts to metal
laths or wire laths can cause heat, smoke
or a fire.
Confirm the bolts of the unit are certainly
caught by the wall mounting plate by...

Included Accessories
Confirm that the following items are included with the elite Panaboard.
No. Part Name Illustration Q’ty Remarks
Power Cord
(3 m [9 ft. 10 
3
/8 in.]) 1 The illustration of the
power cord is for the Uni-
ted States. The shape of
the plug may vary de-
pending on country/area.
USB Cable
(5 m [16 ft. 5 
3
/8 in.]) 1 For computer connection
CD-ROM 1 Operating Instructions
(For Software)
Drivers
Application software
Cable Holder 1 For power cord
Wall Mounting Plate (Left) 1 —
Wall Mounting...

Notice
•Screws (8 count) for wall mounting are not included. Please purchase screws with a size of M6,
appropriate for your type of wall (page 35). 32 Operating Instructions (For Basic Operations)
Installation Manual 

Wall Mounting Construction
Checking the Wall
When mounting on a wall, consult with your building's
 owner, caretaker or construction manager to determine
if the wall strength is sufficient to install the elite Panaboard. For safety, install the elite Panaboard only after
thoroughly understanding the type of walls, the appropriate types of screws and the construction method (Page
35). CAUTION
Do not attach the electronic board to mortared walls. Accidental electric leakage from the wall
mounting plate...

Installing the Wall Mounting Plates
1.Ensure that the wall is strong enough to support the elite Panaboard.
Rated strength: greater than 1324 N (135 k gf)
2. Using the measuring tape and level, mark the 8 locations to insert the screws. Note
•The dotted line in the illustration represents the outer edge of the elite Panaboard.
3. Drill 8 holes for the wall mounting plates.
•Drill holes that are appropriate for the screws you are using.
4. Install the wall mounting plates using the 4 screws.
•2 screws are...

•
Tighten the bolt so that it will not become loose.
• When drilling the holes and installing the wall mounting
 plates, follow the procedure in "Wall Types and
Installation Procedures" (page 35).
5. Mount the elite Panaboard on the wall.
See "Assembling the elite Panaboard" (For Wall Mounting  ® page 42).
Wall Types and Installation Procedures The method for attaching the wall mounting plates to the wall will vary depending on the wall's structure.
Three available options are listed...

Plasterboard walls
Split-wing toggles (not included) are needed. Insert the bolt through the hole in the wall
mounting plate and into the hole in the wall
so that the arms of the split-wing toggle are
horizontal.
For the correct hole size, refer to the instruc-
tions for the particular split-wing toggles
used.
After the arms expand, pull the wall mount-
ing plate out until the arms of the split-wing
toggle grip firmly into the wall.
Tighten
 the bolt until the wall mounting plate
is securely fixed into...

Stand Assembly (Sold Separately)
Included Parts
Check that the following parts are included with the stand (KX-BP061).
No. Part Name Illustration Q'ty
Stand Base 2
Support Beam 2
Side Bar (A) 2
Side Bar (B) 1
Screw (M6 ´ 45 mm [1 
3
/4 in.]) 10
Two-wing Bolt (M5 
´ 12 mm [1
/2 in.]) 2
Support Bracket 2
Fall-prevention Extension Leg 4
Screw (M6 ´ 60 mm [2 
3
/8 in.]) 4
Nut 4
Wrench
*1 1
Washer 10
*1
The included wrench is necessary for tightening and loosening the screw ( ), so keep it in a safe...

CAUTION
Before assembly, be sure to lock the casters. Assembly Instructions
1.Assemble the fall-prevention extension legs. 38 Operating Instructions (For Basic Operations)
Installation ManualLocking the casters
(Push this side)