Panasonic Full Hd Display Tc 50lfc70 Operating Instructions

11
Connections
For 80 inch model
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on 
both the left and right sides.
AC cord  xing
Unplug the AC cord
Unplug the AC cord pressing the 
two knobs.
Note:
When disconnecting the AC cord, be 
absolutely sure to disconnect the AC 
cord plug at the socket outlet  rst.
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of...

12
Video equipment connection
Connections
Speaker connection
Red
BlackRed
Black
1  While pressing the lever, 
insert the core wire.2 Return the lever.
*  DIGITAL LINK is technology that enables signals such as audio and video to be transmitted using twisted pair cables. For details, see the Operating Instructions - “Network Operations”.
SLOT:  Terminal board (optional accessories) insert slot (see page 5)Note:The right side slot is for terminal board with 2-slot 
width. The terminal board with 1-slot...

13
Connections
AUDIO 1 IN: 
Audio input terminal 
shared with VIDEO 
and COMPONENT/
RGB IN.
PC IN:  PC Input Terminal 
Connect to video terminal of PC or 
equipment with Y, P
B(CB) and PR(CR) 
output.
DVI-D IN:  DVI-D Input Terminal
LAN, DIGITAL LINK*
Connect to a DIGITAL LINK input terminal network 
to control the Display. Alternatively, connect to a 
device that sends video and audio signals via the 
DIGITAL LINK terminal.
SERIAL: Serial Control Terminal.  Control the Display 
by connecting to 
PC.AV...

14
Power On / Off
Press the  button on the remote control to turn the Display off.
Power Indicator: Red (standby)
Press the 
 button on the remote control to turn the Display on.
Power Indicator: Green
Turn the power to the Display off by pressing the 
 switch on the unit, when 
the Display is on or in standby mode.
Note: 
During operation of the power management function, the power indicator turns 
orange in the power off state.
Connecting the plug to the Wall Outlet
Notes:
•  Main plug types vary...

SetDayMON18:00Time
Day/Time SettingsTime    MON  99:99
SetDayTUE
18:00 Time
Day/Time SettingsTime    TUE  99:99
OSD LanguageEnglish (UK)Deutsch
Français
ItalianoEspañolENGLISH (US)
	

Panasonic APPLICATION
S-DIRECT  Name1234   Proj1234
Wireless LAN network numberDisplay nameDisplay ID
Displaying network information
The network information for the Display will be displayed in the following scenarios.
The power is turned ON with Panasonic APPLICATION selected as the input.
The input is switched to...

16
INPUTMENU
VOL
ENTER/
+/
-/
Basic Controls
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen will switch. Volume Adjustment
Volume Up “+” Down “–” 
When the menu screen is displayed:
“+” : press to move the cursor up 
“–” : press to move the cursor down
Remote control 
sensor
Main Power On / Off SwitchBrightness Sensor
Detects the brightness in the viewing environment.
Main Unit
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit...

17
INPUTMENU
VOL
ENTER/
+/
-/
Basic Controls
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen will switch.  Volume Adjustment
Volume Up “+” Down “–” 
When the menu screen is displayed:
“+” : press to move the cursor up 
“–” : press to move the cursor down 
Remote control 
sensor
Main Power On / Off SwitchBrightness Sensor
Detects the brightness in the viewing environment.
For 80 inch model
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated...

18
Basic Controls
Remote Control Transmitter
Digital Zoom
1
2PC4:3
  COMPONENTMemory name: MEMORY2
Off timer90min3410:00
Standby (ON / OFF) buttonThe Display must  rst be plugged into 
the wall outlet and turned on at the 
power switch (see page 14).
Press this button to turn the Display 
On, from Standby mode. Press 
it again to turn the Display Off to 
Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect. 
POS./SIZE button 
PICTURE button 
Sound mute On / Off...

19
Speci cations
TH-50LFC70U TH-65LFC70U
Power Source 110 - 127 V AC, 50/60 Hz
Power Consumption
Power on 135 W 210 W
Stand-by condition 0.5 W
Power off condition 0.3 W
LCD Display panel50-inch VA panel (LED backlight), 
16:9 aspect ratio65-inch VA panel (LED backlight), 
16:9 aspect ratio
Screen size43.1” (W) × 24.2” (H) × 49.5” (diagonal) /
1,095 mm (W) × 616 mm (H) × 1,257 mm 
(diagonal)56.2” (W) × 31.6” (H) × 64.5” (diagonal) /
1,428 mm (W) × 803 mm (H) × 1,638 mm 
(diagonal)
(No.of pixels)...

20
Speci cations
TH-80LFC70U
Power Source 110 - 127 V AC, 50/60 Hz
Power Consumption
Power on 345 W
Stand-by condition 0.5 W
Power off condition 0.3 W
LCD Display panel80-inch VA panel (LED backlight), 16:9 aspect ratio
Screen size69.7” (W) × 39.2” (H) × 80.0” (diagonal) /
1,771 mm (W) × 996 mm (H) × 2,032 mm (diagonal)
(No.of pixels) 2,073,600 (1,920 (W) ×1,080 (H))
[5,760 × 1,080 dots]
Operating condition
Temperature 32 °F - 104 °F (0 °C - 40 °C)
Humidity 20 % - 80 % (no condensation) 
Applicable...