Panasonic Hdtv Projection Monitor Pt 53wx54j Operating Instructions

							OPTIONAL EQUIPMENT CONNECTIONS
9 z
ENGLISH
Optional Equipment Connections (cont.)
DVI (Digital Visual Interface) input connection
The DVI/HDCP1 input on your PTV can accommodate copy
protected digital programming. The DVI/HDCP input
terminal complies with the EIA-861Profiles
2 standard and is
not intended for use with personal computers. The DVI/
HDCP input can be connected to an EIA/CEA 861
compliant consumer electronic device, such as a set top
box or DVD player equipped with a DVI output connection
3.
The DVI/HDCP input is designed for best performance with
HDTV signals, such as 1080i. The DVI/HDCP input will
also accept and display 480i and 480p picture signals.
Notes:
1. DVI/HDCP = Digital Visual Interface / High-Bandwidth
Digital Copy Protection.
2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
3. Consult your consumer electronics dealer for availability
details.
Follow the diagram below to connect the PTV to a set top
box or a DVD player. 
Procedure
• Press TV/VIDEO button on the remote control to select
DIGITAL-IN input.
• Connect the DVI output from the set top box or a DVD
player to the DIGITAL IN input on the back of the PTV.
• Connect the Audio Out signal from the set top box or
DVD player to the L and R Audio inputs associated with
the DIGITAL  IN input.
Special Remote Buttons
BBE Button
Press this button to turn BBE sound feature On or Off.
SAP Button
Press this button to let you cycle through different audio modes.
For example:
• If receiving STEREO, SAP and MONO or receiving
STEREO and MONO only, pressing SAP button,
the audio will toggle as follows:  
ASPECT Button 
The ASPECT button on the remote control lets you choose
one of four display modes, depending on the formats of the
received signal and your preferences. 
S-VIDEO
COMPONENT 
VIDEO INPUTVIDEO
12
INPUT
1INPUT
2INPUT
3PROG
OUTTO AUDIO 
AMP
L
R
AUDIOVIDEO
Y
PB
PRTTL
R AUDIO  DIGITAL
IN
ANT 1
SPLIT OUT
ANT 2
DVI OUT
DVI OUT JACKS ON BACK OF STB OR 
DVD PLAYER
 AUDIO  OUTLR
TERMINALS ON BACK OF PROJECTION TELEVISION
L
R
CABLES NOT SUPPLIED
Customer Options depending on Component Input Signal
INPUT
SIGNAL  DISPLAY ON SCREENASPECT BUTTON 
OPTIONS
1080i16:9 onlyNo options
480p (16:9)Default to 16:94:3, Full or Zoom (see 
below)
480p (4:3)Default to FULL mode.
 Note: Will stretch picture 
horizontally.4:3, Full or Zoom (see 
below)
480iDefault to JUST mode4:3, Full, Just or 
Zoom (see below)
STEREO JSAP JMONO
Input SignalASPECT
4
3
Image on 
16:9 Screen Size
4:3
480i or 480p
This will display a 4:3 picture
at its standard 4:3 size with
gray side bars. (Not
recommended for viewing
4:3 pictures as it  may create
a permanent image on
screen if displayed for a
prolonged period of time.)
480i  or 480p
Input SignalASPECTImage on 
16:9 Screen Size
ZOOM
16
9
This will expand the 4:3 
picture uniformly (width and 
height) to full screen width 
and then reposition the 
picture vertically. 
(Recommended for letterbox 
pictures.)
480i  or 480p
Input SignalASPECTImage on 
16:9 Screen Size
FULL
16
9
This will show picture at full 
screen size. (Recommended 
for anamorphic pictures.)
Input SignalASPECTImage on 
16:9 Screen Size
480i
JUST
16
9
This will stretch the right and 
left edges of a 4:3 picture to 
fill the screen, The center of 
the screen will have aspect 
correction applied. The size 
of the picture will depend on 
the original signal. 
(Recommended for regular 
TV viewing.) Note:If menu is displayed while in Zoom mode, the aspect
will change to Full to display complete menu. 
						

							10 z
PICTURE IN PICTURE AND SPLIT OPERATION
ENGLISH
Picture In Picture and Split Operation
Note:The shapes of PIP and SPLIT function buttons may vary
depending on the remote control.
PIP Operation
This television includes a two-tuner Picture In Picture (PIP)
feature. This allows you to watch two (2) live broadcasts at
the same time with or without an external video source
such as a VCR, cable box, etc.
Procedure
• Connect incoming cable to ANT 1 input on back of TV.
• Press   to display PIP frame.
• Select channels for the PIP frame by pressing
.
• Select channels for the Main picture by pressing
or use the remote control numeric keypad.
• Press  to switch the PIP and MAIN PICTURE
source.
• Press  to view picture source status. 
• Press   to cancel PIP frame.
Split Operation
This feature lets you watch two different channels side by
side with or without an external video source.
Procedure
• Press   to display Split screen.
• Select channels for the Split picture by pressing
.
• Select channels for the Main picture by pressing
or use the remote control numeric keypad.
• Press  to switch the SPLIT SCREEN and MAIN
PICTURE source.
• Press  to view picture source status.• Press   to cancel Split screen.
PIP and Split Operation With a Cable Box
To view premium (scrambled) cable channels through your
cable box in the Main Picture:
Note:Use this procedure if you want to watch premium cable
channels in the Main Picture while viewing a television
program or video in the PIP or Split frame.
Procedure
• Select ANT 2 in the SET UP menu.
• Tune TV to Channel 3.
• Press   or  on the remote control to display
the PIP or Split frame.
Note:Audio is from the Main Picture only.
• Verify the Cable box is ON.
• Choose channels for the Main Picture by tuning the
cable box.
• Choose channels for the PIP frame by pressing
.
Note:Swap is not available when using the cable box to tune
channels. If your cable box has video output, it can be
connected to the TV to allow you to use all PIP or SPLIT
functions. See the equipment manual for more
information.
PIP and Split Operational Buttons
TV/VIDEO Button  
Press when PIP or Split frame is displayed to select
desired input mode.   
Search Button (PIP and Split)
This feature lets you scan through all available channels.
Procedure
• Press   or   to display PIP or Split frame.
PIP
     PIP CH
or
CHCH
SWAP
RECALL
PIP
Note:Audio is from Main Picture only.
Main Picture
PIP Frame
SPLIT
     PIP CH
or
CHCH
SWAP
RECALL
SPLIT
PIP
SPLIT
    PIP CH
PIP Frame
Main Picture
CH #
COMPONENT1COMPONENT2
DIGITAL-IN
VIDEO 1/2/3/4
Main Picture
CH #
SPLIT FrameCOMPONENT1COMPONENT2
DIGITAL-IN
VIDEO 1/2/3/4
PIPSPLIT 
						

							PICTURE IN PICTURE AND SPLIT OPERATION
11 z
ENGLISH
PIP Operation (cont.)
• Press   to display search frames.
• Press  again to stop search feature. PIP or
Split frame channel will be the last active search frame.
• Press   or   to cancel PIP or Split frame 
Move Button (PIP only) 
This feature is used to move PIP frame to one of four
corners.
Procedure
• Press   to display PIP frame.
• Press   to position PIP frame to desired corner.
• Press   to cancel PIP frame. 
PIP MIN and PIP MAX Buttons
While PIP frame is displayed, press PIP MIN or PIP MAX
button to vary the size of PIP frame.
Procedure
• Press   to display PIP frame.
• Press   or   to size PIP frame.
• Press   to cancel PIP frame.
Freeze Button (PIP and Split) 
This feature is used to stop action in PIP or Split frame.
Procedure
• Press   or   to display PIP or Split frame• Press   to stop PIP or Split frame action. 
• Press   again to continue action. 
• Press   or   to cancel PIP frame.      
Main Picture Freeze Feature
This feature is used to stop action of the Main Picture and
display it on a Split or PIP freeze frame.
Procedure
• To stop action for Main picture, press   while
PIP or Split frame is not displayed.
• Main Picture freeze will be displayed in a PIP or Split
frame, depending on the selection in the Freeze menu
located in Picture Other ADJ. section (refer to page 17).
• Press   again to cancel Main Picture freeze
frame.
Note:While Main Picture freeze frame is displayed, only
MOVE button is active for PIP, all other PIP and Split
buttons have no effect  (see chart ).
PIP, Split and Freeze Mode Buttons Operational chart
This chart indicates the buttons that are operational with 
PIP, Split or Main Picture Freeze mode.       
SEARCHOPEN/CLOSES
SEARCHOPEN/CLOSES
PIPSPLIT
2
3
4
Search Frames Main Picture
PIP
 MOVE
PIP
PIP Frame
Main Picture
PIP
 PIP MIN PIP MAX
PIP
Main PictureMAX
MIN
PIPSPLIT
REMOTE 
BUTTONSPIP MODESPLIT MODE
MAIN 
PICTURE
FREEZE 
MODE
PIP MINSize SmallerNo EffectNo Effect
PIP MAXSize LargerNo EffectNo Effect
FREEZEFreeze PIP 
frameFreeze Split 
FrameDisplay or 
Delete
PIP CHChange 
ChannelChange 
ChannnelNo Effect
SEARCHDisplays 
Search FrameDisplays 
Search frameNo Effect
PIPDisplays PIP 
FrameDisplays PIP 
frameNo Effect
SPLITDisplays Split 
FrameDisplays Split 
frameNo Effect
MOVEMove PIP 
FrameNo EffectMove PIP 
Frame
SWAPSwap with Main 
PictureSwap with 
Main PictureNo Effect
FREEZETV/VCR
FREEZETV/VCR
PIPSPLIT
Main PictureMain Picture
PIP freeze frame
Note:Audio is from Main Picture only.Split freeze frame
FREEZETV/VCR
FREEZETV/VCR 
						

							12 z
REMOTE CONTROL OPERATION (FOR MODEL PT-47WX34 ONLY)
ENGLISH
Remote Control Operation  (For model PT-47WX34 only)
EUR7613Z8B
               
Press to turn ON and OFF.
POWER
MUTE
 
Press to mute sound. Press to display and
cancel CC (Closed Caption).
SAP
 
Press to access audio modes (Stereo, SAP or 
Mono)
TV/VIDEO
 
Press to select TV or input modes.
Press to select remote operation.
  T
V V
CRD
BS
/
CB
L DV
D
ACTION
Press to access menus.
Press to select next or previous channel and 
navigate in menus.
CH
CH
Press to adjust TV sound and navigate in 
menus.
VOL  VOL
SEARCH
GUIDE
SEARCH - Press for PIP or SPLIT search.
GUIDE - DBS functions button
EXIT
DBS functions button.
*PIP MIN
REW*SPLIT
 PLAY*PIP MAX
FF
*SWAP
PAUSE*MOVE
STOP*PIP
REC
*FREEZE
TV/VCR *PIP CH
VCR /DBS CH
*Split and PIP function buttons
Component function buttons
XPress numeric keypad to select any channel.
7
4
12
5
8
0
9
6
3
R-TUNE
Press to switch to previously viewed 
channel or input modes.
ASPECT
PROG
ASPECT - Select picture size (ratio) to match 
programming format.
PROG - Press to enter minor number in a 
compound number (DBS mode only).
RECALL
Press to display time, channel, sleep timer, 
and other options.
BBE
MENU
 
BBE - Press to turn on or off.
MENU- Press to access DBS menus. 
						

							REMOTE CONTROL OPERATION (FOR MODEL PT-47WX34 ONLY)
13 z
ENGLISH
Operating Components with Remote Control
Note:Refer to page 14 for programming Remote Control
procedure.
Operating a VCR
Program the remote control to use with VCR.
Operating a CABLE BOX
Program the remote control to use with Cable Box. Operating a DBS
Program the remote control to use with DBS.
Operating a DVD
Program the remote control to use with DVD
 
TO DO THIS...PRESS
Turn on/off
Select TV Input mode for VCR
Change Channels up/downVCR/DBS CH
RecordREC
PlayPLAY
St o pSTOP
Fast ForwardFF 
Rewind the TapeREW
PausePA U S E
Change to TV or VCR ModeTV/VCR
 On screen VCR Display RECALL
TO DO THIS...PRESS
Turn on/off
Select a Channel
Change Channels Up/Down
Back to previous channelR-TUNE
POWER
TV/VIDEO
X
POWER
7
4
12
5
8
0
9
6
3
CH
CH
TO DO THIS...PRESS
Turn on/off
Display DBS menuMENU
Menu Navigation
Select a Channel
Program InformationRECALL
Back to previous channelR-TUNE
Select next page up/downVCR/DBS CH
Exit menus
Display program GuideGUIDE
TO DO THIS...PRESS
Turn on/off
Next/Previous Chapter
DVD DisplayRECALL
Skip Search ReverseREW
Skip Search Fast ForwardFF 
PlayPLAY
DVD Open/CloseTV/VCR
St o pSTOP
StillPAUSE
Slow +/-VCR/DBS CH 
POWER
VOL  VOL
CH
CH
7
4
12
5
8
0
9
6
3
EXIT
POWER
CH
CH
X 
						

							14 z
REMOTE CONTROL OPERATION (FOR MODEL PT-47WX34 ONLY)
ENGLISH
Programming The Remote Control
The Universal Remote Control can be programmed to
operate many manufacturers’ components, using the
component function buttons for VCR, DVD, CABLE or
DBS. Follow the procedures for programming your Remote
Control with or without a code for the component.
Note:Determine the manufacturer of the component and look
in the table for the code (found on page 15).
Procedure
1. Confirm that the external component is plugged in and
operating.
2. Turn the component off.
3. Press  and  together, for at least 5
seconds. After 5 seconds, the illuminated mode
(component) buttons will begin to flash. Release the
ACTION and POWER buttons.
4. Press appropriate component button on the Remote
Control VCR, DVD, CABLE or DBS. The component
button will illuminate steadily and all others will go out.
5. Enter the 3-digit component code using the Remote
Control numeric keypad (0 ~ 9 buttons). The component
button will blink twice.
6. Press the Remote Control   to test the
component. If the procedure was successful, the
component will turn on and the component key will blink
twice and then go out.
Note:If the component does not operate with the Remote
Control, repeat the steps 3 through 6 using another code
(some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.
Programming Without A Code
This procedure searches all codes and is called the
“sequence method.”
1. Confirm that the external component is plugged in and
on.
2. Turn the component off.
3. Press  and  together, for at least 5
seconds. After 5 seconds, the illuminated mode
(component) buttons will begin to flash. Release the
ACTION and POWER buttons.
4. Press appropriate component button on the Remote
Control. The component button will illuminate steadily
and all others will go out.
5. Press the   button to set the remote control into
the step and set mode.
6. Point the remote control towards the component.7. Press VOL X(the mode key will blink three times), then
press the Remote Control   button to test the
component. Continue this process until the proper code
is found. If the procedure was successful, the component
will turn on.
Note:Each time you press the VOL X button, make sure that the
component key blinks twice before pressing the POWER
button.
8. Once the device responds, press   to store the
code. The mode (component) button will blink twice.
Note:It may take many attempts before the correct code
is found. If you miss a code, press WVOL, then press
the   button to test the component.
Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.
DeviceOperatesDefault
TVTV (Panasonic Only)Panasonic Code
DBS/CBLDBS STB & CBL STB (Preset)Panasonic DBS Code
VCRVCR (Preset)Panasonic Code 
DVDDVD (Preset) Panasonic Code
ACTIONPOWER
POWER
ACTIONPOWER
POWER
Write the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.
     VCR CABLE DVD  
 DBS  
POWER
ACTION
POWER 
						

							REMOTE CONTROL OPERATION (FOR MODEL PT-47WX34 ONLY)
15 z
ENGLISH
Component Codes (cont.)
Codes For VCR   
BrandCode
Admiral335
Aiwa332
Akai314, 315, 316, 329
Audio 
Dynamic311, 339
Bell & Howell305, 313
Broksonic320, 326
Canon323, 325
CCE343
Citizen306
Craig305, 306, 329
Curtis 
Mathes324, 345
Daewoo 301, 324, 343
DBX310, 311, 339
Dimensia345
Emerson303, 319, 320, 325, 
326, 343
Fisher305, 307, 308, 309, 
313
Funai320, 326, 334
GE324, 333, 345
Goldstar306
Gradiente334
Hitachi300, 323, 345
Instant 
Replay323, 324
Jensen339
JVC310, 311, 334,339
Kenwood306, 310, 311, 339
LXI300, 305, 306,307, 
308, 309
Magnavox323, 324, 331
Marantz310, 311, 339
Marta306
Memorex309, 324
MGA338, 340, 341, 
347,348
Minolta300, 345
Mitsubishi338, 340, 341, 347, 
348
Multitech304, 347
NEC310,311, 334, 339
Olympic323, 324
Optimus306, 321, 328, 335
Orion320, 326
Panasonic321,322, 323, 324
Penney300,305, 310, 311, 
324, 339, 345 
Pentax300,311, 345
Codes For VCR (Contd.)
BrandCode
Philco320, 323, 324, 326, 
331, 343
Philips323, 324, 331
Pioneer323
Proscan300, 301, 302, 323, 
324, 331, 333, 345, 
346
Quasar321, 322, 323, 324
Radio Shack305, 309, 324, 333, 
336, 340
RCA300, 301,302, 323, 
324, 331, 333, 345, 
346
Realistic305, 309, 324, 336, 
340
Samsung302, 304, 333
Sansui320, 326, 339, 352
Sanyo305, 309, 313
Scott301, 302, 304, 309, 
320, 326, 338, 340, 
347, 348
Sears300, 305, 306, 307, 
308
Sharp335, 336
Shintom317
Signature 
2000335
Singer337
Sony328, 329, 330
Sylvania331, 324, 331
Ta s h i r o306
Tatung310, 311, 339
Teac310, 311, 339
Technics321, 322, 323, 324
Te k n i k a324
To s h i b a301, 346
Ve c t o r  
Research311
Wards306, 309, 335, 336, 
344
Yamaha305, 310, 311, 339
Zenith306,344
  
Codes For Cable Box
BrandCode
ABC224
Archer225, 232
Cableview205, 232
Citizen205, 222
Curtis212, 213
Diamond224, 225, 
232
Eagle229
Eastern234
GCbrand205, 232
Gemini222
General
Instrument/
Jerrold211, 219, 
220, 221, 
222, 224, 
225, 226, 
227
Hamlin
212, 218, 
240, 241, 
242, 245
Hitachi203, 224
Macom203, 204, 
205
Magnavox233
Memorex230
Movietime205, 232
Oak202, 237, 
239
Panasonic209, 210, 
214
Philips206, 207, 
228, 229, 
230
Pioneer201, 216
Pulsar205, 232
Puser232
RCA215
Realistic232
Regal
212, 218, 
240, 241, 
242, 245, 
249
Regency234
Rembrandt205, 232, 
237
Samsung205
Scientific Atlanta211, 212, 
213
Slmark201, 205
Sprucer205, 210
Stargate205, 210
Te l e v i e w201, 205
Texscan244
To c o m235
To s h i b a204
Unika225, 232
Codes For Cable Box (Contd.)
BrandCode
Universal222, 232
Videoway206
Viewstar229, 230
Zenith200, 217
Zenith/.Drake 
Satellite200
Codes For DBS  
BrandCode
Dish Network 
(Echostar)105, 115, 116
Echostar105
Express VU105, 115
G.  E .106
G.I. (General 
Instrument)108
Gradiente11 4
Hitachi103, 111, 
11 2
HNS (Hughes)103
Magnavox101, 102
Panasonic104
Philips101, 102
Primestar108
Proscan106, 109, 110, 
11 3
RCA106, 109, 
110, 113
Sony107
Star Choice103, 108
To s h i b a100
Uniden101, 102
Codes For DVD
BrandCode
Denon100
Ferguson101
JVC109
Mitsubishi105
Nordmende101
Panasonic100
Philips103
Pioneer102
RCA101
Saba101
Samsung11 0
Sharp108
Sony104
Te c h n i c s100
Thomson101
To s h i b a103
Yamaha100
Zenith107 
						

							16 z
REMOTE CONTROL OPERATION (FOR MODELS PT-47WX54 AND PT-53WX54 ONLY)
ENGLISH
Remote Control Operation (For models PT-47WX54 and PT-53WX54 only)    
               
Press to turn ON and OFF.
POWER
MUTE
Press to mute sound. Press to display and
cancel CC (Closed Caption).
SAP
 
Press to access audio modes (Stereo, SAP 
or Mono).
TV/VIDEO
Press to select TV or input modes.
Press to select remote operation.
 V
CR
 DVD
   
TV
 C
BL DB
S
 
AU
X RC
V
R
 DT
V
ACTION
Press to access menus.Press to select next or previous channel and 
navigate in menus.
CH
CH
Press to adjust TV sound and navigate in 
menus.
VOL  VOL
GUIDE 
DBS functions button.
*PIP MIN
REWPLAY*PIP MAX
FF
PAUSESTOPREC
*FREEZE
TV/VCR *PIP CH
VCR CH*SEARCH
OPEN/CLOSE
*PIP*SPLIT     *MOVE
       *SWAP
*Split or PIP function buttons
Component function buttons
XPress numeric keypad to select any channel.
7
4
12
5
8
0
9
6
3
R-TUNE
Press to switch to previously viewed 
channel or input modes.
PROG  
Press to enter minor number in a compound 
number.
RECALL    
Press to display time, channel, sleep timer, 
and other options.
EXIT
DBS functions button.
PA G E
DBS page up/down and DVD skip -/+
buttons. 
LIGHT  
Press to illuminate remote buttons.
ASPECT  
Select picture size (ratio) to match 
programming format. 
EUR7603Z9A
BBE
MENU
BBE - Press to turn on or off.
MENU - Press to access DBS or DVD menus. 
						

							REMOTE CONTROL OPERATION (FOR MODELS PT-47WX54 AND PT-53WX54 ONLY)
17 z
ENGLISH
Operating Components with Remote Control
Note:Refer to page 19 for programming Remote Control
procedure.
Operating a VCR
Program the remote control to use with VCR.
Operating a CABLE BOX
Program the remote control to use with Cable Box. Operating a DBS
Program the remote control to use with DBS.
Operating a DVD
Program the remote control to use with DVD. 
TO DO THIS...PRESS
Turn on/off
Select TV Input mode for VCR
Change Channels up/down
 PIP CH
VCR CH
RecordREC
PlayPLAY
St o pSTOP
Fast ForwardFF 
Rewind the TapeREW
PausePA U S E
Change to TV or VCR ModeTV/VCR
 On screen VCR Display RECALL
TO DO THIS...PRESS
Turn on/off
Select a Channel
Change Channels Up/Down
Back to previous channelR-TUNE
Exit menus
POWER
TV/VIDEO
X
POWER
7
4
12
5
8
0
9
6
3
CH
CH
EXIT
TO DO THIS...PRESS
Turn on/off
Display DBS menuMENU
DBS ASPECTASPECT
Menu Navigation
Select a Channel
Program InformationRECALL
Back to previous channelR-TUNE
Select next page up/downPA G E
Channel Up/Down
PIP CH 
VCR CH
Exit menus
Display program GuideGUIDE
TO DO THIS...PRESS
Turn on/off
Next/Previous Chapter
DVD DisplayRECALL
Skip Search ReverseREW
Skip Search Fast ForwardFF 
PlayPLAY
DVD Open/CloseOPEN/CLOSE
POWER
VOL  VOL
CH
CH
7
4
12
5
8
0
9
6
3
EXIT
POWER
CH
CH
X 
						

							18 z
REMOTE CONTROL OPERATION (FOR MODELS PT-47WX54 AND PT-53WX54 ONLY)
ENGLISH
Operating a DTV Set Top Box
Program the remote control to use with DTV. 
Operating a Cassette Deck
To operate a cassette deck, the remote control must be in
AUX mode and be programmed with the appropriate code
for your equipment. 
Operating a Receiver
Program the remote to operate audio receiver. Operating a PVR (Personal Video Recorder)
Program the remote control to use with a PVR.    
TO DO THIS...PRESS
Turn on/off
DTV ASPECTASPECT
Select a Channel
Navigation Left / Right
Back to previous channelR-TUNE
Exit menus
TO DO THIS...PRESS
Turn on/off
Receiver Volume Up/Down
Deck A/BR-TUNE
RecordREC
PlayPLAY
St o pSTOP
Fast ForwardFF 
Rewind the TapeREW
PausePA U S E
TO DO THIS...PRESS
Turn on/off
Audio Mute
RCVR. VOL Up/Down
Tuner Pre-set stations Up/
Down
POWER
7
4
12
5
8
0
9
6
3
VOL  VOL
EXIT
POWER
VOL  VOL
X
POWER
MUTE
VOL  VOL
CH
CH
To select AV Inputs or
Components:
Press Remote numeric 
keypad
Surround VOL DownPIP MAX
Surround VOL UPPIP MAX 
Center CH VOL Up/DownVCR CH
TO DO THIS...PRESS
Turn on/off
PVR Navigation
Select a Channel
PlayPLAY
RecordREC
PausePAUSE
Back to previous channelR-TUNE
Exit menus
PVR GuideGUIDE
Replay ZonesR-TUNE
Quick SkipOPEN/CLOSE
Return to livePROG 
TO DO THIS...PRESS
AV  1 P r e s s  1
AV  2 P r e s s  2
AV  3 P r e s s  3
AV  4 P r e s s  4
CD Press 5
TUNER Press 6
PHONO Press 7
TAPE Press 8
AUX Press 9
POWER
VOL  VOLCH
CH
7
4
12
5
8
0
9
6
3
X
EXIT