Panasonic High Speed Color Scanner Kv S5055c Operating Manual
Have a look at the manual Panasonic High Speed Color Scanner Kv S5055c Operating Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 59
4.Close the ADF door.
• Push both sides of the ADF door down slowly until it clicks into place.
5.Set the power switch of the scanner to "" (ON).
6. Reset the roller cleaning counter in User Utility to 0.
• Start User Utility, and in the window, click the [Clear Counter] button for "After Clean Roller" to reset
to counter to 0.
• For details, refer to the help for User Utility.
Operating Manual59Care and Maintenance](http://img.usermanuals.tech/thumb/58/69673/w64_kv-s5055c_oi_d-58.png "Page 59
4.Close the ADF door.
• Push both sides of the ADF door down slowly until it clicks into place.
5.Set the power switch of the scanner to \"\" (ON).
6. Reset the roller cleaning counter in User Utility to 0.
• Start User Utility, and in the window, click the [Clear Counter] button for \"After Clean Roller\" to reset
to counter to 0.
• For details, refer to the help for User Utility.
Operating Manual59Care and Maintenance")
3.Remove dirt on the sensors ( A, B , C , D , G ) and reflectors ( J) with the included blower, then wipe the scanning glass ( E, I ) and reference plates ( F, H ) with the roller cleaning paper (page 51). Location of SensorsAWaiting sensorBDouble feed detectorCSlip detect sensorDStarting sensorEScanning glass (F)FReference plate (B)GPaper sensorHReference plate (F)IScanning glass (B) Notice •After cleaning, make sure that the mark on the outside of the reference plate and the mark on the reference plate are aligned (page 44). If the marks are not aligned, the background color will not be correct. Operating Manual61Care and Maintenance1 56 2 7 2 3 4 8 9
Location of ReflectorsJReflectors62Operating ManualCare and Maintenance10 10
4.Close the ADF door. • Push both sides of the ADF door down slowly until it clicks into place. 5.Set the power switch of the scanner to "" (ON). Operating Manual63Care and Maintenance
Replacement Parts and Optional UnitsPart NamePart NumberNotes Replacement Parts Roller exchange kit • Paper feed roller module • Double feed prevention roller KV-SS039– Roller cleaning paperKV-SS03See "About the roller cleaning paper" (page 51). Ink cartridgeKV-SS021 For optional imprinter unit. For instructions on installation and removal, see "Installing the Ink Cartridge" (page 77). Optional UnitsImprinter unitKV-SS014 Prints text and numbers on documents. Includes 1 ink cartridge. For instructions on installation, see "Installing the Imprinter Unit" (page 74). Note •To purchase separately sold items, contact your dealer. When to replace parts We recommend replacing the paper feed roller module and double feed prevention roller after scanning 350,000 sheets of paper. (350,000 sheets is based on scanning normal paper. Depending on the type of paper and other factors, the actual lifetime for the rollers will differ.) In User Utility, you can check the number of sheets that have been scanned. 64Operating ManualR e p l a c e m e n t P a r t s a n d O p t i o n a l U n i t sReplacement Parts and Optional Units
Replacing PartsIf double feeding or paper jam occurs frequently even after cleaning the roller (page 56), please call your dealer to order a "Roller exchange kit (KV-SS039)", and replace the paper feed roller module and double feed prevention roller. Replacing the Paper Feed Roller Module 1.Set the power switch ( A) of the scanner to " " (OFF), and unplug the power cord. 2. Pull the ADF door release ( A) towards you, and open the ADF door ( B). Operating Manual65Replacement Parts and Optional Units 1 12
3.Move the lever ( A) of the paper feed roller module in the order indicated by the arrow ( A, B ), and then pull out the module towards you. 4. Take out the new paper feed roller module in the optional "Roller exchange kit (KV-SS039)". 66Operating ManualReplacement Parts and Optional Units12 1
5.Install the new paper feed roller module. • With the lever ( A) of the paper feed roller module lowered, insert both protrusions ( B) into the grooves ( C ), and then slowly raise the lever in the direction indicated by the arrow until it clicks into place. Notice •Make sure that the paper feed roller module's lever is firmly set. If the lever is not firmly set, the lever or the paper feed roller module might become damaged or might not function correctly. Operating Manual67Replacement Parts and Optional Units3 1 233 2 2
6.Close the ADF door. • Push both sides of the ADF door down slowly until it clicks into place. 7.Plug in the power cord, and set the power switch of the scanner to "" (ON). 68Operating ManualReplacement Parts and Optional Units
Replacing the Double Feed Prevention Roller1.Set the power switch ( A) of the scanner to " " (OFF), and unplug the power cord. 2. Pull the ADF door release ( A) towards you, and open the ADF door ( B). Operating Manual69Replacement Parts and Optional Units 1 12
3.Pull towards you and remove the double feed prevention roller cover by using the indent ( A). 4. While pulling the tab ( A) in the direction indicated by the arrow, lift the double feed prevention roller ( B) in the direction of the arrow. Then, pull out the right shaft (when facing it) from the notch in the roller mount. 5. Take out the new double feed prevention roller in the optional "Roller exchange kit (KV-SS039)". 70Operating ManualReplacement Parts and Optional Units1 1 2